Error in extended collection

Similar Questions

• Msinfo32.exe generates an Error Message "cannot collect information.

  Hello

  I am running XP Prof with SP3 and made a scan with the perfect system optimizer and it did remove a lot of files he said were copies and since then, Information System says that it can collect Information, cannot access windows management instrumentation software. Windows Management files may have been moved or missing. I tried to use the administrative tools in the Management Console Microsoft and add snap - in following the instructions from microsoft on their site, but still did not help. Also tried to restore as soon as possible and the recovery of deleted files from the optimizer software. Nothing has helped so far. I am also on a network with my laptop which runs on Windows 7, but the have not enabled since I stupidly paid 39.99 for this software now appeasrs to have screwed up my computer. Restoration did do 1 restore and I tried 5 times and it said could not files to an earlier time which is an another prolbem I've had for a while with system restore doesn't work does not correctly. If anyone can help me I would really appericiate it. Thank you my friends.

  PKBISHOP

  Hi PKBISHOP,
   
  The error message occurs if the Windows Management Instrumentation (WMI) service is not started. This can happen if the service is disabled, if a dependent service is not started, or if a problem is preventing start the WMI service. The system information utility will be able to collect information that the WMI service is started.
   
  To correct this information to resolve this problem, see the link below.
   
  Msinfo32.exe generates an Error Message "cannot collect information.

• Error 50103 to collect data using 9229

  I use 9229 (usb casing) to collect the attached vi data.

  But received error attached 9229, any suggestion?

  Use you it just like that. Instead of Dev1/ai0, use Dev1 / ai0:3. Simple.

  You can do the same thing by clicking on the small arrow to the right of the physical channel constant travel. Use Ctrl or shift + click to select your channels.

  It's probably covered in the Getting Started with DAQmx tutorials.

• APPCRASH error - then "extended attributes are incompatible" when I try to do something

  My laptop started to lose connection problems and I kept resetting linksys and it would work and then quit again. I had a mistake some time ago when the download of Norton, but it works very well since their. I then downloaded PC health and scanned and do add on errors. Today I really can't do much. I scan with Spyware Doctor and it said no infections, but still I can't do anything. Every error I get says APPCRASH or BXE and I cannot download anything to try to scan or system restore even the computer I only errors. I had to download Perfect Optimizer, but it will not work... just says everything has stopped working, Windows incident reports even stopped working... APPCRASH wermgr.exe said then C:\Program Optimzer/PerfectOptimizer.exe perfect - extended attributes are incompatible... said that whenever I try to do something? Any ideas?

  Hello
   
  
  It is not recommended to install several security software at the same time. Remove the additional security software, then check. Make sure you have at least a software installed.
   
  Method 1.
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
  
  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows

  Vista, Troubleshooting in safe mode problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  We can use the approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Games on Windows Vista do not work, error "player Extender to reinstall.

  All the games on my icons does not... He sends the box, reinstall Extender player... I have no idea what is... And can you tell me how to...

  Hello

  • You receive the error just trying to check out the games software (s)?
  • Have you checked in another user account?
  • Have you made recent changes to the computer before the show?
  • Please let us know the list of games that you have the problem.

  Try the steps mentioned below:

   

  Method 1: Configure your computer in a clean boot and search for the issue.

  un) How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.Microsoft.com/kb/929135

  b) Note: once you are done with the boot, follow step 7 in the article to put your computer to normal startup.

  Method 2: Uninstall and reinstall the game and check.

   

  Hope it works.

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• ThinkVanmtage System Update 5 'error in the collection of user information'

  I use ThinkVantage System Update 5.06.0027; Windows 7 64-bit, SP 1; Lenovo Thinkpad E540

  Whenever I click on 'Get new Updates', after 10% finished I get the message "an error has occurred all." by collecting user information I read many other positions on this subject, and I checked my Mappinginterface.xml file. He already understands the code for Windows 7 SP 1, so I think that changing the code to include my operating system is not the solution.

  If anyone has other solutions to this bug, I would be grateful of your.

  Thank you.

  I have reviewed your logs. Your breaking point is:

  Severe 2015-02-15, 05:57:51
  at Tvsu.Engine.Process.HelloProcess.Start)
  Message: Error getting of the Egather Analyzer
  Exception:
  Internal message: error-2147483648, program abort()
  Type: Tvsu.Egather.Exceptions.EgatherGeneralException

  > The same mistake as the user altoid666

  General idea of what's going on

  (1) su needs to collect information system on your machine

  (2) the program IA.exe (inventory agent) is given control / launched

  (3) via the command TVSU launcher that also interacts with the SUservice.

  My tests of SU

• Get 'not enough values error' in bulk collect

  I want to insert all the rows in the employees table in the tmp table which has the structure.

  Purpose: Try just feature fired block to create a return to the top of a table.

  Problem: My code is to not "enough of values" error please report if mistaken.

  structure of the employees table:

  SQL > desc employee;

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  EMPLOYEE_ID NOT NULL NUMBER (6)

  FIRST NAME VARCHAR2 (20)

  LAST_NAME NOT NULL VARCHAR2 (25)

  EMAIL NOT NULL VARCHAR2 (25)

  PHONE_NUMBER VARCHAR2 (20)

  HIRE_DATE NOT NULL DATE

  JOB_ID NOT NULL VARCHAR2 (10)

  SALARY NUMBER (8.2)

  COMMISSION_PCT NUMBER (2.2)

  MANAGER_ID NUMBER (6)

  DEPARTMENT_ID NUMBER 4

  tmp table structure:

  SQL > tmp desc;

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  EMPLOYE_ID NUMBER (6)

  FIRST NAME VARCHAR2 (20)

  LAST_NAME NOT NULL VARCHAR2 (25)

  EMAIL NOT NULL VARCHAR2 (25)

  PHONE_NUMBER VARCHAR2 (20)

  HIRE_DATE NOT NULL DATE

  JOB_ID NOT NULL VARCHAR2 (10)

  SALARY NUMBER (8.2)

  COMMISSION_PCT NUMBER (2.2)

  MANAGER_ID NUMBER (6)

  DEPARTMENT_ID NUMBER 4

  SQL > select * from tmp;

  no selected line

  Code:

  declare

  type rec is the employee table % rowtype

  index by pls_integer;

  a rec;

  Start

  Select * bulk collect in a

  employees;

  ForAll i in a.first... a.Last

  Insert into tmp values (a (i));

  end;

  /

  Result:

  SQL > declare

  2

  3 type rec is the employee table % rowtype

  4 index of pls_integer;

  5 a rec;

  6

  7. start

  8 remove tmp;

  9 select * bulk collect in a

  10 employees;

  11 ForAll i in a.first... a.Last

  12 insert into tmp values (a (i));

  13 end;

  14.

  Insert into tmp values (a (i));

  *

  ERROR on line 12:

  ORA-06550: line 12, column 13:

  PL/SQL: ORA-00947: not enough values

  ORA-06550: line 12, column 1:

  PL/SQL: SQL statement ignored

  Remove parentheses

  insert into tmp values a(i);
  

  or call the individual columns

  insert into tmp( employee_id, first_name, ... )
   values( a(i).employee_id, a(i).first_name, ... );
  

  Justin

• Update error CS5 Master Collection

  Hello

  I get the following errors when downloading an update for CS5 Master Collection, any help/suggestions:

  https://www.dropbox.com/s/ufqo58czq7dp1yd/screenshot%202015-10-21%2019.42.56.PNG?DL=0

  https://www.dropbox.com/s/mkw05v2h30pcqti/screenshot%202015-10-21%2019.42.47.PNG?DL=0

  Dropbox - 2015-10-21 19.42.41.png screenshot

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• Error extracting Master collection CS6_LS16

  I downloaded the files from the master collection (7z 6.5 GB of files and 1 MB exe file) but get this error at the extraction (even if I extracted as an administrator: "this is a problem in retrieving your files.) Check the availability of space and the rights to write to the destination folder. Help.

  On the thought about it once again, the best choice is probably the re - download it again:

  Download Creative Suite 6 applications

• Get error in the collection

  Hi gurus

  I read about collection and practice but I got stuck in the following codes:

  -----------------------

  Code

  DECLARE

  RECORD IS of TYPE RecordTyp (employees.last_name%TYPE, the last

  ID employees.employee_id%TYPE);

  REC1 RecordTyp;

  -type rec1 is the RecordTyp table;

  BEGIN

  SELECT last_name, employee_id bulk collect INTO rec1

  WHERE ROWNUM < 2 employees;

  DBMS_OUTPUT. PUT_LINE

  (' Employee #' | rec1.id |) ' = ' || REC1. (Last);

  END;

  ------------------------------------------------------------------------

  Error

  Error from the 1 in the command line:

  DECLARE

  RECORD IS of TYPE RecordTyp (employees.last_name%TYPE, the last

  ID employees.employee_id%TYPE);

  REC1 RecordTyp;

  -type rec1 is the RecordTyp table;

  BEGIN

  SELECT last_name, employee_id bulk collect INTO rec1

  WHERE ROWNUM < 2 employees;

  DBMS_OUTPUT. PUT_LINE

  (' Employee #' | rec1.id |) ' = ' || REC1. (Last);

  END;

  Error report:

  ORA-06550: line 7, column 51:

  00497 PLS: do not mix between row and several rows (in BULK) list

  ORA-06550: line 8, column 6:

  PL/SQL: ORA-00904: invalid identifier

  ORA-06550: line 7, column 3:

  PL/SQL: SQL statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  -----------------------

  Please guide

  Note: if I remove bulk collect then its works fine.

  You bulk collect into an array. Maybe say you something like

  declare
    type recordtyp is record(
       last emp.ename%type
      ,id   emp.empno%type);
    type recordtyparray is table of recordtyp;
    rec1 recordtyparray;
  begin
    select ename
          ,empno bulk collect
      into rec1
      from emp
     where rownum < 2;
    dbms_output.put_line('Employee #' || rec1(1).id || ' = ' || rec1(1).last);
  end;
  

  BTW, CODE uppercase: it is very old.

  Also, even if it is good to practice using these features for when you might need them, 99

  times out of 100 you shouldn't use liaison in bulk and in PL/SQL loops when pure SQL would.

• error in the collect function

  Hello
  I use the application below to collect
  
  Select account_id_N, collect (connection_id_v) of the My_test_table group by account_id_n;
  
  but its me gives error like below.
  
  ORA-00932: inconsistent data types: expected NUMBER obtained -
  00932 00000 - ' incompatible data types: wait %s %s got. "
  * Cause:
  * Action:
  
  can someone please help me find the error.
  
  Thank you.

  The document clearly states that you must use CAST with COLLECT.

  http://docs.Oracle.com/CD/B19306_01/server.102/b14200/functions024.htm#SQLRF06304

  something like that.

  
  create type emp_name as table of varchar2(100)
  /
  select deptno, cast(collect(ename) as emp_name) enam_list from emp group by deptno
  / 
  

  Note: Collect function has some behavioral differences when used from sqlplus and SQL Developer
  COLLECT the bug?

• Error using BULK collect with RECORD TYPE

  Hello
  
  I wrote a simple procedure to declare a record type & then by a variable of type NESTED table.
  
  I then selects the data using COLLECT in BULK & trying to access it via a LOOP... We get an ERROR.
  
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  
  CREATE OR REPLACE PROCEDURE sp_test_bulkcollect
  IS
  
  TYPE rec_type () IS RENDERING
  emp_id VARCHAR2 (20).
  level_id NUMBER
  );
  
  TYPE v_rec_type IS TABLE OF THE rec_type;
  
  BEGIN
  
  SELECT employe_id, level_id
  LOOSE COLLECTION v_rec_type
  OF portfolio_exec_level_mapping
  WHERE portfolio_execp_id = 2851852;
  
  FOR indx IN v_rec_type. FIRST... v_rec_type. LAST
  LOOP
  
  dbms_output.put_line ('Emp-' | v_rec_type.emp_id (indx) |) » '|| v_rec_type.level_id (indx));
  
  END LOOP;
  
  END;
  -----------------------------------------------------------------------------------------------------------------------------------
  
  Here is the ERROR I get...
  
  
  -Errors of compilation for the PROCEDURE DOMRATBDTESTUSER. SP_TEST_BULKCOLLECT
  
  Error: PLS-00321: expression "V_REC_TYPE" is not appropriate for the left side of an assignment statement
  Online: 15
  Text: IN portfolio_exec_level_mapping
  
  Error: PL/SQL: ORA-00904: invalid identifier
  Online: 16
  Text: WHERE portfolio_execp_id = 2851852;
  
  Error: PL/SQL: statement ignored
  Line: 14
  Text: COLLECT LOOSE v_rec_type
  
  Error: PLS-00302: component 'FIRST' must be declared
  Online: 19
  Text: LOOP
  
  Error: PL/SQL: statement ignored
  Online: 19
  Text: LOOP
  ------------------------------------------------------------------------------------------------
  
  Help PLZ.

  and with a complete code example:

  SQL> CREATE OR REPLACE PROCEDURE sp_test_bulkcollect
    2  IS
    3  TYPE rec_type IS RECORD (
    4  emp_id VARCHAR2(20),
    5  level_id NUMBER
    6  );
    7  TYPE v_rec_type IS TABLE OF rec_type;
    8  v v_rec_type;
    9  BEGIN
   10     SELECT empno, sal
   11     BULK COLLECT INTO v
   12     FROM emp
   13     WHERE empno = 7876;
   14     FOR indx IN v.FIRST..v.LAST
   15     LOOP
   16        dbms_output.put_line('Emp -- '||v(indx).emp_id||' '||v(indx).level_id);
   17     END LOOP;
   18  END;
   19  /
  
  Procedure created.
  
  SQL>
  SQL> show error
  No errors.
  SQL>
  SQL> begin
    2     sp_test_bulkcollect;
    3  end;
    4  /
  Emp -- 7876 1100
  
  PL/SQL procedure successfully completed.
  

• Verity &amp; lt; cfsearch &amp; gt; Returns &amp; quot; collection is not &amp; quot; error - when the collection is

  I created a collection using the Coldfusion Administrator - and this shows when viewing of all collections. I also filled the collection using < cfindex > - by using a SQL query - and that seems to work well. He put 117 entries in the collection - and this appears also in the Coldfusion Administrator recoveries.
  
  The problem is when I try to search the collection with the < cfsearch > tag, it returns an error indicating "collection that you specified does not exist or is not registered with the ColdFusion Search Service."
  
  I can see the collection that I'm looking for is. Is there anything else I need to do to get the < cfsearch > function to find the collection? I tried to repair the collection, the collection optimization, even delete and recreate - nothing seems to work. I Specifies the full path to the collection in my cfsearch, so that shouldn't be the problem.
  
  Y at - it another command or feature, I need to run?
  
  Thank you!!! Pamela
  

  Quote:
  I Specifies the full path to the collection in my cfsearch

  Not sure if this is the problem. The path exists in the CFAdmin. You can see the name of the collection in the cfsearch tag.

  Code to see the attachment, you can do a cfdump to see what the results are returned.

• In Oracle 10 g error when using COLLECT

  I get the error when you use collect in 10g
  
  SQL > ed
  A written file afiedt.buf
  
  1. SELECT deptno
  2, COLLECT (ename) AS PGE
  3 FROM emp
  GROUP 4 BY
  5 * deptno
  SQL > /.
  COLLECT (ename) AS PGE
  *
  ERROR on line 2:
  ORA-00932: inconsistent data types: expected NUMBER obtained -
  
  Please give me the solution.

  you use the old version of SQL * more. If you use the later version, it will give you correct the result.

  Published by: ūnōrum on March 14, 2010 04:25