Error in loading a file

Similar Questions

• Error while loading data file with using a file of rules through a MAXL.

  I think that the functionality to generate a. Records error during loading data in the ERR file is supported only if there is a. RUL file being used.
  
  Is this good?
  
  I tried to get. ERR files to generate by using the following statement:
  Import database PL_RPT. Reprting data data_file
  "E:\Hyperion\AnalyticServices\APP\PL\PL.txt" to load_buffer with buffer_id 17
  Error writing to "E:\Hyperion\Scripts\Pln\Logs\LoadlData.err."
  
  When I run this, if there are errors, it is not generated any file errors and stops the load.
  
  I saw the technical reference Essbase ASO MAXL data loading and code syntax diagram indicates that it is supported.
  
  Any suggestions will be greatly appreciated.
  
  Thank you

  Hello

  Here are a few suggestions for trapping errors. I hope that one of them will meet your needs:

  1._____________________________________________

  spool to 'D:\logs\maxlresults.out ';

  function SIERREUR 'WRITE_ERRORS ';

  / * do stuff * /.

  Define the label 'WRITE_ERRORS ';
  spool off;
  spool to 'D:\logs\maxlerrors.out ';
  "exit";

  2._____________________________________________

  coil stdout to "D:\logs\maxlresults.out."
  coil stderr to "D:\logs\maxlerrors.out."

  3._____________________________________________

  essmsh script.msh 2 > D:\logs\maxlresults.out

  Robb

• SG error when loading quicktime files

  Hey guys, could use help:

  I try to use the SpeedGrade class room in a book tutorial. I'm just in the first chapter. I open the project and get a timeline. I point the media browser to the folder, hit "over office' and calendar changes turns the blue.

  However, the thumbnails are grey white, and when I go to the "Color" tab I get the message "error opening file".

  The "Render" tab > others > Quicktime, I get the message "the Quicktime library could not be initialized. Please make sure that Quicktime 7 or later version is installed.

  I installed QuickTime v7.7.4 and can play the clips (with the extension .mov) without problem outside the SG.

  I am running this cloud Adobe Creative on an Intel i5 - 3570 k quad-core with 8 GB of RAM on a 64-bit Windows 7 system with a 1024 MB graphics card (older) Nvidia GeForce 9500 GT (version 327,23 driver. No new updates available.)

  I did some poking around in the forums here, but don't can't get an answer that works. The resolution, I have sous-échantillonnées. Adjust the size of the cache. Files deleted and started around, etc. Any help would be appreciated.

  Thank you!

  Long shot:

  1 - uninstall SG and ensure that preferences are trashed.

  2 reinstall QT

  3 reinstall SG

• Get the error when loading data into the base cube

  Hi all
  
  I get the error by loading the file of hollow data to the database below.
  Please take suggest me...
  
  I use ESSBASE 9.3.1.3.
  
  
  Error:
  
  Basic charge database
  The Xchgrate database management
  Load the database Interntl
  Sample application loaded - connection established
  Start the application [example] with the process id [1688]
  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile
  Unexpected error Essbase 1030010

  Empty invalid character in name (E:\My personal Data\Test\222.txt) based on the ESSAPI EssUpdateFile

  Essbase has problems with spaces (white space characters) the path names (my personal data)

  Rename your path or move the data file to a location that has no characters/spaces in the path name.

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  Hello friends,

  After the end of my process of cloning... I try to change my login user ID pwd through FNDCPASS, but, unfortunately it show me this error as I try to used the @CMclean.sql. also, you cannot run.

  
  

  FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  
  

  Score help out me
  

  Post the details of the version of the application and the operating system.

  Have you from the correct env file before running FNDCPASS? See (Doc ID 943005.1) for more details.

  If it comes to 12.1.x on Linux OS, please make sure that you follow all the steps by (Doc ID 761564.1) / (Doc ID 761566.1) and you have all applied pre - req OS packages.

  Thank you

  Hussein

• sqlplus: error while loading shared libraries: /opt/oracle/lib/libclntsh.so.11.1: ELF file data encoding not little-endian not

  Hello

  I get the error message below.

  We have made the correction but the suite spot not be able to start the database.

  sqlplus: error while loading shared libraries: /opt/oracle/u01/app/oracle/product/11.2.0.3/lib/libclntsh.so.11.1: ELF file data encoding not little-endian not

  Need your help in resolving this issue.

  Thank you

  Srinivasan R wrote:

  Hello

  FYI,.

  We have applied the fix for database only and there's OS patching.

  Thank you

  Srinivasan R

  Realize that Oracle provides the PATCH of the DATABASE for different versions of the OS & if you apply the patch to the database for the version of Solaris on a HP version.

  then the problems will result.

  If sqlplus worked without error before applying the patch & now ENDIAN error reports, problem exists between keyboard and Chair!

• appvolume Setup is complete but get error below when opening the web app-volume Manager interface. Cannot start the volume App Manager "cannot load this file - tiny_tds.

  "failed to start volume App Manager" boot failure Unable to load the file of this type - tiny_tds

  

  Hi Paul amstaur,.

  This question says, I've met before, and there is a permission problem. Please do below things to get rid of.

  Since you have already installed the app volume, go back to the snapshot, or install a vanilla OS. Provide a sufficient permission in the local security policy, if you install SQL express as well as the volume of the app as the backup Administrator, debug as an administrator, log in as a service to the domain user. Also make sure the time is correct on the computer. You must restart the computer after you gave permission.  Most of the cases you already have full filled what mentioned above, but still you get an error.  To get rid of it, you must copy the appvolume installation files to the local directory, may be in the C drive and recommending only not to mount the ISO in virtual CD ROM, instead of copy and extract the ISO locally.  the next important thing is that you must run the setup.exe AppVolume run as administrator.

• I'm having problems to download creative it low cloud load some files and now telling me that there is an error

  I'm having problems to download creative it low cloud load some files and now telling me that there is an error

  How about some DETAILS on this error?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• When I install Flash Professional CC 2014, I get the error: DW039: cannot load deployment file

  When I install Flash Professional CC 2014, I get the error:

  Exit code: 16 Please see specific errors below for troubleshooting.

  For example, ERROR: DW039...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  ERROR: DW039: cannot load deployment file

  -------------------------------------------------------------------------------------

  I found the solution: please launch customer 'Creative cloud'-> preferences-> selection of the English language (International)-> restart the creative Cloud client and reinstall Flash CC 2014. It works for me. Before that, my language setting is Chinese.

  It is a bug, please fix as soon as POSSIBLE.

• ERROR: DW039: cannot load deployment file Lightroom 4.3

  I tried 3 times, including restarting but still get the same error once the application has download; oaded, ectracted and then begins the installation which is about 2%, then the installation fails with the error notice: DW039: cannot load deployment file!

  Hello

  Lightroom 4.3 fix for "install fails when the English (International) is selected ' is now LIVE.

  Please launch "Adobe Application Manager"-> click on username (upper-left)-> preferences-> English (International)-> Save selection. -> Click on the Lightroom Installer on the screen of the applet and Install should be successful.

  Lightroom will then be operational.

  If you see problems, breakdowns, please report on the forum

  Thanks and greetings

  Ajay jegou

• S.O.S.      Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2124: loaded file is unknown

  I'm doing a site web flash with

  Flah cs3 as3. power was perfect, but the codes to replay

  get crazy.  There is a photo gallery that has little thumbnail photo on the right, and when one of them turned on, this picture is loaded SWF and appear in large size on the left. today because I have the setting codes last few things gave me errors...

  Error #2044: Unmanaged by the IOErrorEvent:. Text = Error #2124: loaded file is an unknown type.

  types of Elf, I changed I saved pictures in jpg, jpeg, bmp, png. but nothing works.

  Please help me cause I have to finish in 3 hours.

  If your image loading code is attached to a frame which plays more than once, you will have this problem.  If this isn't the cause, show your code.

• SQL * Loader Control File - Error 510

  Hello!
  
  I am trying to load a file TXT using SQL * Loader, my control file is a little too big I guess: 83KO.
  
  The problem is the message I get:
  
  SQL * Loader: release 10.2.0.3.0 - Production on Qua game 16 11:18:58 2009
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  SQL * Loader-510: O registro fisico dados (C:\Teste\Exe548teste_zanthus.old.ctl) e but full o' maximo land (2147473647).
  
  The language is Brazilian Portuguese.
  
  But the size of the file is only 83 KB, not the maximum size. I'm confused.
  
  The data is a TXT file with more than 1000 characters per line.
  The problem is that the generated control file is 'bigger' than the maximum. The error is not from the data file (error in the control file, not the data file). If you want I can put the file here and a sample of the data file too.
  
  I guess that is not find expressions of the folklore of the control file, but there a tank < ENTER > at the EOF (CR + LF (I think).
  
  I really want to split the data file or in multiple files control file and then control the import with the software, which would be boring...
  
  I don't know if this information helps but my control file using multiple INTO TABLE...
  
  Thank you!

  I still feel that the problem is the end character.

  André Luis wrote:

  The comparison is ok since I have already tested with a small control file.

  The problem is not the size of the file, the problem is the size of the line, with a small control file sql loader to read the file only online, and in this case it works because it is under the limit for the size of the line. (The smal file perhaps has the same problems with the characters of late, but due to its size it recount not error.)

  I hope that I missed something in the creation of the control file, I think he tries to read data from it, despite the fact that I have to tell him otherwise, because I saw something to tell the size limit for a control file with data inside...

  The control file syntax is OK, I don't think that he search data in the control file.

  I insist on the fact that you are creating the control file with another editor, otherwise...

• In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

  In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

  This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

  On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

  Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.