Error in multiple regions

Similar Questions

• I always Cached preview needs 2 error or multiple images for playback

  I always Cached preview needs 2 error or multiple images for reading, when I press the SPACEBAR reading button ONCE! How can I do a Ram preview?

  Open the project in 2014 CC file and see if it behaves correctly.

  There are a few problems - especially with audio - in 2015 of CC. See the following page: problems in after effects CC 2015 (13.5). After the effects of interest area

• More information on "error: linked multiple directory.

  What does "error: linked multiple directory" indicate, and how can I fix this error? This error comes from OSB 10.4.0.2.0.
  
  I found this in some of the newspapers for backups of my servers. Some of the directories are NFS shares, however it is not only shared NFS directories. My concern is that when I try a test restore in one of the directories concerned, there is no option of restore. This seems to indicate that no data is being backed up, which is a problem. This also raises the question - if the whole directories are not be saved due to errors, why do the servers present themselves as having failed to save successfully? It's VERY FRUSTRANT having to browse through the newspapers of backups "successful" in order to find these errors. It will be worse when customers go to restore from their backups 'successful' to find the critical directories may have been ignored.
  
  I found two messages without answer of December 6, 2010-November 9, 2010, on this forum with the same question, so I'm not the only user encounter this error.
  
  Please provide more information on this error "multiple directory-related" and why partially failed backups appear as backups successfully with warnings.

  This means that the folder exists also another point of Assembly on the machine and the backup has been captured through that. Can you confirm the OS this is to and also after the release of "df-h" so that we can check.

  Thank you

  Rich

• Windows Media Player error: DVD wrong region (DRMS)

  My stop Windows Media Player with the error: wrong region DVD.
  But DVD is right region, it works on other systems.
  What could be the reason?
  How can I check which configuration or HW is bad?

  tanks

  Werner

  In the start search box type: devmgmt.msc and press the Enter key.

  Expand the CD/DVD ROM drives

  Right-click on it and select Properties

  Click on the region of DVD.

  Find the country the DVD were made, select it, and then select OK.

  You can also try a different media player, VLC Media Player

  http://www.videolan.org/

• How to manage the lines multiple region table OFA

  Hi gurus,

  I'm new to the development of new Pages of the OFA. Please help me how to manage multiple lines in the table region OAF.

  My requirement I'm not able to manage multiple lines in my area of Table.

  First row in my table area I am selected date_start and date_end when I select the end_date I need I need difference bet ween dates.

  My problem is I am able to manage the first Table line but I am not able to manage the table still ranks when I fire that time I first get the rank only.

  POS:

  14/08/12 07:59:40 1

  14/08/12 07:59:40 inside

  14/08/12 07:59:40 date difference is 86400000

  14/08/12 07:59:40 date difference is 1

  14/08/12 07:59:40 date is less than 365

  14/08/12 07:59:57 1

  14/08/12 07:59:57 inside

  14/08/12 07:59:57 date difference is 86400000

  14/08/12 07:59:57 date difference is 1

  14/08/12 07:59:57 date is less than 365

  14/08/12 08:00:13 1

  14/08/12-08:00:13 inside

  14/08/12 08:00:13 date difference is 86400000

  14/08/12 08:00:13 date difference is 1

  14/08/12 08:00:13 date is less than 365

  My custom logic:

  	If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  	DateDiff (pageContext, webBean);
  //	Am = XxDutyTravelAMImpl
  //	(XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);
  	OAViewObject = oaviewobject1
  	(OAViewObject) am.findViewObject ("XxDutyTravelDuDetEOVO1");

  	System.out.println("1");
  	If (oaviewobject1! = null) {}
  	System.out.println ("Inside");
  	oaviewobject1. Reset(); New line added
  	oaviewobject1. Next(); new line added
  	Line OARow = (OARow) oaviewobject1.getCurrentRow ();

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  	Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  	java.util.Date VChangeDateTime =
  	new java.util.Date (sDate.timestampValue () .getTime ());

  	If (sDate! = null & & eDate! = null) {}
  	long m1 = sDate.timestampValue () .getTime ();
  	long m2 = eDate.timestampValue () .getTime ();

  	long diff = m2 - m1;
  	System.out.println ("difference in date is" + diff);
  	int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  	System.out.println ("difference in date is" + diffDays);
  	If {(diffDays > 365)
  	System.out.println ("Date is greater than 365");
  	} else {}
  	System.out.println ("Date is less than 365");
  	}
  	}
  	}
  	}

  Kind regards

  Srinivas

  Hi Srini,

  To get the event line descriptor that shot please use code below.

  If (DutDetSEndDat".equals (pageContext.getParameter (EVENT_PARAM))) {" "}
  DateDiff (pageContext, webBean);
  Am = XxDutyTravelAMImpl
  (XxDutyTravelAMImpl) pageContext.getApplicationModule (webBean);

  String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  OARow line = (OARow) am.findRowByRef (rowRef);

  Date sDate = (Date) row.getAttribute ("DutdetStartDate");

  Date = eDate (Date) row.getAttribute ("DutdetEndDate");
  java.util.Date VChangeDateTime =
  new java.util.Date (sDate.timestampValue () .getTime ());

  If (sDate! = null & eDate! = null) {}
  long m1 = sDate.timestampValue () .getTime ();
  long m2 = eDate.timestampValue () .getTime ();

  long diff = m2 - m1;
  System.out.println ("difference in date is" + diff);
  int diffDays = Math.round (diff / (24 * 60 * 60 * 1000));
  System.out.println ("difference in date is" + diffDays);
  If {(diffDays > 365)
  System.out.println ("Date is greater than 365");
  } else {}
  System.out.println ("Date is less than 365");
  }
  }
         
  }

  Thank you

  Vlaminck

• Analyze the error with show region if

  Hello

  I have a form that has 2 parts to it.

  I added a checkbox, then assign the checked value 1

  I wrapped the rest of the form in a div and applied see if region to it.

  When I downloaded the Web I get this error:

  Parse error: syntax error, unexpected ' @', expecting T_VARIABLE or ' $' expected

  someone has seen this before and know how to fix?

  Thanks a lot for your help

  Hello

  It seems that your MEASUREMENT generates bad code and perhaps duty be handed up. He added the place holders within its own functions rather than the correct code needed to place in your page.

  If you change this line:

  If (((isset(@$_POST["Accept"]))? @$_POST ["Accept"] ":" "") == 1) {}

  with this line:

  If ((isset($_POST["Accept"])) & ($_POST ["Accept"] == 1)) {}

  you shouldn't get more than the error.

• EAS data Load Error 1200315 - error analysis formula [REGION DEFINITION]

  Hello
  
  I use 11 EMP system. When you try to load data into Essbase via EAS using a .txt file and a rules file (or a file .csv, and rules file for), I get the following error:
  
  Formula [definition of REGION] (line 0) parse error: invalid object type.
  Unexpected error of Essbase 1200315.
  
  Does anyone know what causes this error? What is the [DEFINITION of REGION] (line 0)? The combination data file / rules file I used had worked last week, and I don't know exactly when or why this error started happening. I can provide more information if necessary. Thank you.

  have you changed the names of any dimension or member or removed members? Check the header of data load rule to see if there a member name that is more broadly. (It could also be a substitution variable in the rule that no longer exists)

• Can we average channel error using multiple channels to measure the same voltage?

  I don't know how correlated error terms are between measuring channels max, but it occurred to me that, if they were relatively independent, I might be able to sample the signal even with several channels and increase accuracy.

  For example, rather than measure a voltage with an AI only at 100 kHz, I could connect up to 10 different lines to HAVE the signal, sample to 10 kHz on each line.  This should allow to reach me on average some of the error associated with each channel (, or so I think).

  Can someone speak definitively to this?

  Thank you

  Sean

  Well, if you are using a MULTIPLEXED Board (everything is not specced for simultaneous sampling) then each channel is connected to the ADC even one after the other, best that you would be able to do is extremely, extremely small variations into the paths of each channel of the multiplexer.  This would still be massively overshadowed by the inherent noise from the system and the accuracy of the device.

  Your best bets to reduce the measurement error is to oversample in one way to reduce the effects of noise and to calibrate the unit before starting each test to keep variations of temperature.  In addition, make sure you keep your calibrated Board (most of the boards have a calibration 1 year of the cycle).

  For some applications, you should also consult wiring field and considerations of noise for analog signals, How to eliminate ghosting of my measurements? and Troubleshooting unexpected tensions, floating or crosstalk on Analog Input Channels to better account for ghosting and the issues of the hour.

• Error message DVD region code in Windows Media Player on Windows 7

  Original title: Windows Media Player cannot read my DVD

  I'm reading a DVD that was produced by my company in Toledo Ohio. A pop-up message telling me that it cannot be read in my part of the world. As photography video and DVD recording made in Toledo, I don't understand why it won't play. More when I went to the web for help following the instructions that I was told there is no solutition for this problem. Can you help me?

  Hi johnefalk,

  Try these steps and check the result.
  Step 1: Change DVD region
  a. Click Start, type devmgmt.msc and press on enter to open Device Manager.
  b. double-click on CD-ROM/DVD-ROM drives, click on the DVD drive that you want, and then click Properties.
  c. on the DVD region tab, make the desired changes.

  Note: To configure your DVD drive to play discs from other regions, select a geographic area from the list of regions. As a general rule, you must select the region in which you reside. It is not often necessary to change the setting again.

  Important: The region can change only a limited number of times. When changes remaining equals 1, and you select a new region, an alert is displayed to warn you that after this, you only will be able to play DVDs from that region. Be aware that you will not be able to change the region setting for some DVD hardware and software decoders.

  Step 2: If the problem persists, run the Windows Media Player DVD Troubleshoot utility and check the result.
  Open the Windows Media Player DVD Troubleshoot utility
  

  For more information, see change the region for a DVD Player setting

  See also: , change the country or region setting

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphone App Error 523 - multiple incidents. Help, please!

  I have a 8330 on Verizon and about 2 weeks, I received the "app error: 523. I tried to delete applications and restarting it but none of it worked because I couldn't get to the phone. I could not even save my data and contacts. I was forced to enter the password incorrectly and wipe everything that my phone is off. I then reinstalled the operating system and everything was fine. I recently started having my contacts and everything new, but when I rebooted, it tonight, I got message again. It's very frustrating! I don't have a lot of apps at all (Google maps, google talk, facebook, etc.) Can someone please give me an idea? Will I still have to deal with? Any help is greatly appreciated!

  -Shaun

  It could be a number of things...

  App is not compatible with your phone or your current theme

  Newly installed theme might be corrupted

  SD card

• Installation of multiple instances of Essbase on a single machine

  Dear gurus,

  I did the install vanilla of the costume of Hyperion (11.1.2.2) products on my machine (windows 2008 SP1, its a Virtual Machine) virtual machine (I installed Foundation, EAS and just Essbase)

  My first Essbase instance is running on default port 1423and I tried to configure the second instance of Essbase using port 1424 and all the donfiguration succeeded. I can see the 2nd service of essbase running at services.msc

  I followed the steps mentioned in the:

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/epm_install_11121/frameset.htm?essbaseAgentPortPanel.html

  My 1st instance is installed to: D:\Oracle\Middleware\user_projects\epmsystem1

  My 2nd instance is installed to: D:\Oracle\Middleware\user_projects\epmsystem2

  Now the problem is that I can add and connect 1st instance of Essbase (SERVERNAME:1423) using the administrator account in the environmental assessment.

  but when I try to add 2nd Instance of Essbase as SERVERNAME:1424 using the administrator account, it throws the following error:

  Error on the Regional service console:

  Admin October 8, 2013 14:29:21 IST com.essbase.eas.admin.defs.AdminCommands.AddServerToUserList Succeeded

  Essbase Server: SERVERNAME:1424 com.essbase.eas.essbase.defs.ServerCommands.Connect IST 14:29:22 October 8, 2013

  Error: 104: username or password

  Error: 1051012: native://DN=cn=911 of the user, or = People, dc is css, dc = hyperion, dc = com? The USER does not exist

  Error on Essbase.log (of 2nd instance):

  [Mar Oct 08 10:59:22 2013] Local/ESSBASE0 / / / 7488/Error (1051012)

  The user native://DN=cn=911, or = People, dc is css, dc = hyperion, dc = com? The USER does not exist

  [Mar Oct 08 10:59:22 2013] Local/ESSBASE0 / / / 7488/Warning (1051003)

  Error 1051012 processing application [LoginEx] - disconnect

  EPM diagnosis system run on 2nd instance watch following under "Essbase/Essbase:

  FAILED

  EE: Essbase Server

  Validate the connection to the Essbase on servername Server Error: Cannot sign as an already logged in user. Recommended action: Check that essbase server is started.

  Can you please guide me what to do to access this 2nd Forum.

  (1) do I need to have a separate ADMIN user creation for this 2nd instance essbase? If Yes, then HOW?

  (2) I can just copy the essbase.sec of 1st instance of 2nd instance?

  Can you please point me to a reference to have multiple independent instances of Essbase on the same machine?

  I sincerely thank you for your time to this request.

  Best regards,

  Amit

  Do not copy the file s multiple instances.

  It seems that the 2nd day of the Essbase instance has not registered properly with Shared Services, you can try renaming the essbase.sec on the 2nd instance, erase the Essbase.log, resume Essbase, then check the Essbase.log to see if there are errors anyt'ing.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Error-201314 whenever the engine killed

  Hi guys,.

  I'll build a test bed that takes a few smaller engine size measures. I use the 9188 cDAQ platform and a module in the series C 9401 to get the signal of an encoder that is mounted on the engine. Whenever I kill the engine I get code error-201314 saying the following:

  DAQmx error: sampling Multiple clock pulses have been detected within a period of the
  input signal. Use a sample clock rate that is slower than the input signal. If
  you use an external sample clock, make sure this clock signal is within the j
  Itter and voltage level specifications and seedless.

  The way I have the configuration of the task, it's pulse tachometer to act as an external sample clock and charges against the edges of 20 MHz clock, so I can hardly believe I'm getting any type of engine accelerates faster than the clock of 20 MHz. Anyone has an idea what this message means? So, I wonder if I need to be more careful about the way my reasons are connected.

  Thanks for the help,

  Ryan

  Hi Ryan,

  Small defects on the edge rising or falling of your tachometer signal could be picked up as additional edges.  I suspect that the Act of powering the motor is presenting the noise on the line, whose meter is picking up as the edges in double during transitions.

  The 9188 she supported for digital filtering on the meter inputs - introduced feature in DAQmx 9.4 for the 9188.  You can use the digital filtering to reject any pulses below a certain duration.  From your description, it seems this would be a likely solution to the problem.

  In LabVIEW, you can define a digital filtering of the sample with a property node DAQmx Timing clock signal:

  

  If you use a different API and ill have to find the equivalent property do not forget to let me know.  Remember that if you use a version of DAQmx before 9.4 you will need to update your driver to have the feature available for your 9188.

  Best regards

• Error of frequency power CC LV power line driver

  Hi all

  I'm trying to use the frequency line vi in the niDCPower driver. If I use initialize it with vi channels and set one channel then I have no problem but if I try to define several channels the PLF vi gives an error "BFFA0044 required channel or repeated feature name. Can someone explain why this vi gives this error when multiple channels are defined in the initialization stage? I checked SFP power DC and this attribute is settable only in one place and apply, as you would expect, all channels, so I'm a little confused why this error occurs.

  Thank you

  Nick

  Hi Said,

  Just to tell you that I have updated to the latest versions of MAX and DC power, and the problem disappeared so it was version somehow. Interesting upgrade notes do not mention this in the list of the fixes of the new version brings, but in any case, it's all good now.

  Thank you

  Nick

• Error 1097 when calling DLLS in LabView

  I get an error 1097 when calling the LabVIEW provider library. Curiously, the error, the DLL routines still seem to do what is asked of them.  This is the test code.  It opens an Ethernet connection to a controller of axes Galil, he asks (possibly) the value of its internal clock, and then closes the connection.  Each call library function returns error 1097 but "valve function" I32 error number is always zero. Open function causes the connection to be opened, the command function causes the send command and receives a reasonable answer, narrow funtion seems to cause the connection to be closed.

  

  Here is what I see when I run the test:

  

  Also directly configure call-library functions, as I did in this VI, I also tried using the import-shared-library Wizard to create a vilib of functions of the DLL and I get the same behavior and errors when I use these functions.  I tried to tweak some of the data types in my configured manually call library functions to see if I could find a combination that worked better with the library, but had no luck there.

  I use the x 86 version of the DLL with v2014 LabVIEW 32-bit on a 64 bit windows system 7.  I see that the error on the two computer systems of different work configured in this way. I see a similar error on a home computer with just the RTE of 2014 installed. The manufacturer says they can not reproduce the error. I always saw the error over multiple versions of their library DLL.

  In the attachment ZIP it has a link to the DLL library on the manufacturer's website. There is also a copy of the VI, the DLL and a large part of how-to-use documentation that accompanies the DLL.

  I was hoping that someone who was familiar with the use of the call-library function might take a peek at what I do and see if an error could be spotted.

  Unable to find an error, I did, I would be happy to suggestions on how I could solve this. Little seems to me like there may be a problem with the library. The manufacturer, Galil, said that they have opened a log with OR to see if NEITHER could help but since Galil said they can not reproduce the problem and provide an example of the NC, it really went anywhere.

  Given the decoration of symbol names as exported by the DLL I "m convinced that you must change the stdcall calling convention.

• Compilation of procedure error

  I'm trying to compile a procedure which is supposed to fill the tables with data, but I get errors ignored multiple statements. I'm running out of ideas what could be wrong, because the syntax seems very well. I downloaded the full code here: http://pastebin.com/gTnpj0Jm . Could someone please take a look?

  0566fdce-4035-4cdd-b2da-37d1e2b97e42 wrote:

  I'm sorry, but I searched in my code for a good 10 minutes and I can't find any case to appoint a pl/sql variable same as column name.

  You are right. Question is different.

  DECLARE
  DATE OF BORN_DATE_VALUE;
  BEGIN
  BORN_DATE_VALUE: = Trunc)
  TO_DATE ('2000 ', 'yyyy')
  +
  DBMS_RANDOM. VALUE)
  0,
  TO_DATE ('2015 ","yyyy")
  -
  TO_DATE ('2000 ', 'yyyy')
  ));
  END;

  INSERT INTO STUDENT (ID_STUDENT, F_NAME, L_NAME, BORN_DATE)
  VALUES (S_STUD. NEXTVAL, F_NAME_VALUE, L_NAME_VALUE, BORN_DATE_VALUE);

  BORN_DATE_VALUE range block, in which it is declared. If being outside the block INSERT statement in that born_date_value is declared, INSERT does not know what BORN_DATE_VALUE and assume it is the column name.

  SY.