Windows Media Player error: DVD wrong region (DRMS)

Similar Questions

• Windows Media Player 11 says wrong region to play DVDs purchased in the United States - why?

  I apologize in advance; I'm sure that this question has been asked many times before, but I have been searching Microsoft for two hours and I'm frustrated that there is no clear answer.

  I'm in the United States the computer was purchased from the United States the activated, legal Vista Home Premium is on U.S. time and language settings. The DVD was purchased from the United States and the seller (Amazon, a reliable company) confirmed to me in writing that it is meant to be played in the United States the region on my player says DVD region 1. All settings are enabled by default. Media Player 11 is updated as part of the Microsoft Windows automatic update service.

  Why won't she, and why the error message:

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  I would appreciate it very much if someone could point me to a specific answer, as vain hours clicking on the links on the immense site of Microsoft have resulted in nothing relevant. Thank you very much.

  I apologize in advance; I'm sure that this question has been asked many times before, but I have been searching Microsoft for two hours and I'm frustrated that there is no clear answer.

  I'm in the United States the computer was purchased from the United States the activated, legal Vista Home Premium is on U.S. time and language settings. The DVD was purchased from the United States and the seller (Amazon, a reliable company) confirmed to me in writing that it is meant to be played in the United States the region on my player says DVD region 1. All settings are enabled by default. Media Player 11 is updated as part of the Microsoft Windows automatic update service.

  Why won't she, and why the error message:

  "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. »

  I would appreciate it very much if someone could point me to a specific answer, as vain hours clicking on the links on the immense site of Microsoft have resulted in nothing relevant. Thank you very much.

  =====================================
  You can change the region but only a few times, then
  you're stuck... so this isn't a good idea.

  Windows Vista - change DVD region
  http://grok.LSU.edu/article.aspx?articleid=2334

  Have you tried the DVD on a different drive... just like a
  experiment?

  FWIW... Perhaps the media player freeware at the following address
  be worth a try... it will play anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I can't play movie rental download from BigPond on Windows Media Player, error COOD11B1

  Windows media player comes up automatically but doesn't read movie download - displays a window message "Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web. "When I click web help, I get"error COOD11B1. It's "original COOD2906 = error message Windows Media Player does not support the level of protection required for uncompressed digital video." I can't use a different drive.

  Perhaps the following would offer a few ideas:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

  Good luck...

• Windows Media Player error when you try to play a CD: C00D1197

  I played the CD/DVD on my laptop (windows vista) with no problems.  I popped in a DVD and it plays very well.  When I jumped into a music CD, (the one I've played a dozen times) I "Error Message C00D1197."  When I went to my computer and clicked on the CD/DVD player - he said that he had NO CD/DVD read and spit my CD.  When I put my rear DVD - no problems.  Put in a CD, a CD, I get an error message. That's happened? I did something different.  I wonder if the new window updates caused the problem.  Unfortunately, I am not that computer savvy to be messing around on my laptop to see.  Can you help me? PLEASSSSEEEE.  Thank you! : o).

  Hello

  These should help:

  WMP - C00D1197
  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

  Also check this KB which could apply to other versions of WMP
  http://support.Microsoft.com/kb/834483

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.

  To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback.  In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."

  I am able to record dictation through a program of Dragon NaturallySpeaking.

  I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.

  Hello

  The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.

  Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.

  Method 1:

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=c00d11ba&ContextId=68&OriginalID=80040256

  Method 2:

  Diagnose and solve the problems of Windows audio playback automatically

  http://support.Microsoft.com/mats/AudioPlayback/

  You can also try the manual steps provided in the below mentioned link and check.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  Hope this helps and keep us posted.

• WINDOWS MEDIA PLAYER ERROR COOD1199

  I HAVE A NEW DELL WITH VISTA HOME PREMEUM SP2 LAPTOP. THEN TRY TO OPEN AN E-MAIL WITH AN ATTACHMENT VIDIO, I GET A WINDOWS MEDIA PLAYER ERROR COOD1199. WHAT SHOULD I DO ABOUT IT?

  Hi marcs251,

  Welcome to the Microsoft Answers site!

  To help you better with this problem I would like to answer a few questions.

  (a) what is the format of the file you are trying to play?

  (b) you are able to play the files on your hard drive?

  In the meantime, you can try the methods below to see if the problem is resolved.

   Method 1:

  Make sure that the file type of the file that you are trying to play is supported by Windows Media Player.  If this isn't the case, you can do a search using your favorite internet search

  provider to find a player who is able to read the file.

  The link below explains the types of files (formats) supported by Windows Media Player.

  http://www.Microsoft.com/windows/windowsmedia/player/9series/playererrors.aspx#c00d1199_0x00000000

  Method 2:
  You may also check if Windows media player support for the codec used to compress the file and you may need to install the right codecs to play the file.

  Please visit the link below to find out how to obtain, install, or update a codec:

  http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx#q14_3

  You can also check out the link below which gives information about the codec:

  http://windowshelp.Microsoft.com/Windows/en-us/help/3d0c5a49-8F61-45cc-8A7D-38c4695ba9291033.mspx

  You can also use the link below to find if the steps can help you with the problem

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Hope this information was useful.
   
  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Not able to play the fieles audio using Windows Media Player - error: Windows Media Player Error Message C00D11B1

  Sometimes the Audio files are not played using Windows Media Player. Even if I'm not able to turn on/off the audio. Settings audio button is not working too.

  Error: Windows Media Player Error Message C00D11B1

  When I rebooted my dell Inspiron laptop, this problem does not occur, and I am able to hear the audio. Let me know the fix for this problem permanently.

  Hello

  If you're having trouble playing a song or video, it may be because of the codec problem. I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Windows media player convenience store settings and check. Follow the steps to run the Troubleshooter:

  1. Press the Windows key + Q on your keyboard and type Troubleshooting and click Troubleshooting under results of research.
  2. Now, click on programs.
  3. Click the Windows media player settings to run the troubleshooter.
  4. Click on library of Windows media player to run the troubleshooter.

  Method 2:

  I suggest you to refer to the help article and check if it helps.

  Windows Media Player C00D11B1 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Windows Media Player Error Code C00D2AFA when reading a DVD - HELP

  Unable to get Windows Media Player for playback of DVDs. Tried to install Windows Media Player 11 (upgrade). Installation failed. Error Code C00D2AFA

  Hi Marlowe2nd,

  1. what operating system is installed on the computer?
  2. what version of Windows Media Player you have?
  3. how you try to install Windows Media player 11?

  Method 1
  Try the following steps:

  a. click on Star menu, choose run.
  (b) in the box that appears, type

  regsvr32 jscript.dll

  Press key once. A small pop-up message should appear on the
  "regsvr32 in successful jscript.dll.

  Method 2
  I suggest that you put the computer in a clean boot and see if the problem still occurs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• try to burn a cd on windows media player error - parameter is incorrect

  I am trying to burn a cd on windows media player and it repeat setting is incorrect.

  Hello

  1. what version of windows media player do you use?
  2. don't you make changes on the computer before this problem?
  3. What is the full and exact error message?

  Try to run the fix it tool to the article below and check.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also:

  Resources for the resolution of problems in Windows Media Player
  http://support.Microsoft.com/kb/843509

• Cannot retrieve the CD in Windows Media Player, error: No CD.

  Original title: Media Player

  When I insert a CD to rip media player does not detect a CD has been inserted... says 'no CD '.  It won't play or anything.  All the answers?

  Hello

  (1) is the specific issue of Windows Media Player or the CD? You are able to access the CD through Windows Explorer?

  (2) what is the exact full error message?

  (3) remember you to make changes to the computer before the show?

  You can try the steps in the following methods and check the status of the issue.

  Method 1:

  Your CD or DVD drive cannot read or write media.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Extract music from a CD.

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD

  Rip music: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-frequently-asked-questions

• My windows media player and dvd.

  Hello I have a laptop with windows vista and my windows media player does not burn the songs or veiwing DVD and when I go to Itunes It does not burn the songs or audio books that I have. and I called around to see what it is I do. I'm trying not to re - store the laptop but if it comes down to it them I guess I have to. If anyone can help me find out why this happens thanks

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• The streaming videos on Windows Media Player error "your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer.

  I'm trying to videos from 3 completely different sites.

  The last post I got Windows Media player was

  "Your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer. »

  I replaced WITHOUT hardware on my computer, and last week, I could listen no problem at all!

  How to get corrupted my media usage rights and how to remedy the situation?

  I'm not a complete dummy, but sometimes I feel like one. :(

  Hello

  This problem can occur if the media rights (DRM) a folder is corrupted. We need to reset Windows Media DRM in delete/rename all the files in the Windows Media DRM folder. Note that the Windows Media DRM folder is a hidden system folder.

  Check out the links and follow the suggestions that are marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Winapps/getting-error-messageyour-media-usage-rights-have/54bfacbb-C104-4c22-800F-f293d18d94c2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/constantly-getting-this-message-your-media-usage/840c560d-04aa-4ae2-aed0-59022cfdef04

  Please let us know if the problem still persists.

• Windows Media Player error message says that I don't have the media usage rights acquisition.

  Original title: Windows Media Player

  Am not able to play music in Windows Media Player to the library after the transfer of music from another computer.  Error message says that I don't have the media usage rights acquisition.

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  Cause of the error:

  Windows Media Player uses Microsoft Digital Rights Management (DRM) to protect the rights of content owners who protect their music or video products in this manner. You must have usage rights required to play, burn, or sync protected content.

   

  How to upgrade the DRM license?

  By default, Windows Media Player will automatically attempt to acquire the rights of use in silence unless the server requires some input on your part (for example, registration or tax information). You can disable the automatic rights acquisition. In this case, you will be asked to obtain the rights for any new content that requires them. To prevent Windows Media Player from acquiring rights automatically, do the following:

  a. click on the arrow on the now playing tab, and then click Other Options.

  b. click on the Privacy tab, and clear the automatically check if protected files need to be refreshed check.

  Please note that this setting affects not acquisition of rights of use of online stores.

  Which settings affect privacy in Windows Media Player?

  http://Windows.Microsoft.com/en-us/Windows7/which-settings-affect-privacy-in-Windows-Media-Player

  To upgrade the security for your digital media player component, see:

  The security component upgrade

  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  This page allows you to upgrade the components of security of your digital media player to play the files on your computer.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Windows media player error C00D1197, and I trying to activate all the protcals network and fix if all goes well. How?

  I have tried to resolve the error C00D1197 for months and ran into a field that says "to enable all network protocols.  How would I do that as this error comes up saying "Windows Media player cannot find the file.  If you try to read, burn or sync an item in your library, the element can point to a file that has been moved, renamed or deleted".  I try to rip and burn and can not and some music from the library has different songs on the album listed, but it plays ok.  A little help from a friend if you please.  TKS, Jimbo

  Hello

  Windows operating system you are using?

  If you use Windows 7, then you can try the following steps and check

  Method 1:

  You can read the following article and check if it helps.

  Windows Media Player C00D1197 error

  Note: This article also applies to Windows Vista.

  Method 2:

  You can also try to run the Windows media player settings Troubleshooter and check.

  Solving the problems of open Windows Media Player settings

• Method used by Windows Media Player error correction

  Hello.

  Could someone tell me - in technical terms - that the option "use error correction" in Windows Media Player makes when copying audio CD tracks?

  I would like to make possible more precise PMR using WMP, but the lack of information about the method used by WMP special error correction makes it difficult know when or even if you need to select the option.

  For example, I wonder if the use of error correction could result in a less accurate RIP (for example, if the method used favors estimate on rereads multiples of a CD damaged surface.) Also, for example, assuming that the error correction is always beneficial, I wonder if it is always worth the burden of extra time (for example, tearing a new CD with no surface damage.)

  I am aware that the audio CD support a system of "forward error correction", that is to correct errors code being inserted in the music of the data from the drive. What is the allusion makes WMP error correction? (If Yes, then why don't I have hear occasional noise and click in the .wma file generated when "use error correction" is unchecked?)

  A technical response would be highly appreciated. Thank you.

  Ant

  Hello

  Error correction looking for points on the CD where it is unable to read and will attempt to read them again.

  It will not lead to inaccurate burns.