Installation of multiple instances of Essbase on a single machine

Similar Questions

• Multiple instances of JDeveloper on the same Machine (JDev 11.1.2.3 under Windows)

  Hello:
  
  I would like to implement two completely separate of JDeveloper instances. So I installed JDev #1 in a separate Directory that JDev #2. Everyone seems to work ok.
  
  I like to keep these two JDev installs completely separated. JDev #1 I intend to change by extending the base classes, use UTF - 8, etc...
  
  #2 JDev, I want to keep as it has been installed. No modification of the system.
  
  When I changed JDev #1 to use UTF - 8, it also changed JDev #2 to use UTF - 8.
  
  How can we separate these two completely different JDev installs, so a change in one does not affect the other?
  
  Thanks for the help...

  If both JDev is the same version then they will share the default system directory.
  To avoid this, you need to put another House for each user when you call it.
  See the installation guide:
  http://docs.Oracle.com/CD/E35521_01/install.111230/e17074/ojdig.htm#BDCJCHDF

• Multiple instances of VBAI

  I know that we can now acquire multiple cameras in VBAI (thanks!).  However, in my view, what to do so leads to very complex control sequences.  It doesn't look like VBAI has fully embraced parallelism for anything other than the FTP transfer.  What should I do if I have 5 cameras GigE each needs to be raised, and where it is possible that two can be triggered at the same time?  Can I run multiple instances of VBAI on a single PC (hey, it's multi-core)?  I predict that the current response is to use LabVIEW, but VBAI is especially LabVIEW... right?

  I want to retain only the simple, single camera, inspections on the PC.  Running multiple instances of VBAI would allow me to devote an instance for each camera without worrying about what's happening on TSF the other 4 (or more).

  No, I have not tried to do it again.  Currently, I am out of town and away from my vision laboratory.  I thought that if this is possible, it is worth mentioning to the public and if it is not, then, it is worth noting in R & D.  The system I'm imagining would be a future version of a system, we finished just where we had 4 NI Smart Cameras and a GigE camera.  The question is on what to do if all 5 GigE cameras.  Don't worry, we still love the SmartCams!

  On a sequence of validation.

  Dan press

  PrimeTest Automation

  Hey Dan,

  Good question! VBAI supports the acquisition of several cameras, even if they are triggered at the same time. We have a flag in the acquisition stage that allows to specify if you want to wait as the following picture or purchase immediately. Thus, in the case simple two cameras triggered at the same time, you will have an initial state who tried to acquire the camera 1 and if there was a timeout he loop back and try again using the wait for the flag of the next Image. When an image is acquired, you know that the other camera was triggered, so you transisition to another State who acquires the camera 2 with an immediate flag, since we know that the image is already there. You can use the image select to switch between the two images, so it is possible, but not necessarily the cleanest. Even if you had two VBAIs simultaneously, synchronizing is not trivial to make sure you weren't inspect imageN camera1 and imageN + 1 on camera2, but perhaps this would not be the cause of your system. In any case, we don't currently support multiple inspections VBAI operating simultaneously on a system, but it is certainly a feature that we know.

  Thanks for your series of validation,

  Brad

• Multiple instances, simple applications of level

  Hi all
  
  I'm looking for a little guidance regarding having 2 separate EBS database instances, working from a single mid level Apps 11.5.10.
  I spent a few hours trying to dig up information on this topic (Metalink/internet), but most of the searches return top Appl sharing information of for multi mid level of nodes.
  
  Is it possible to run 2 databases under a middle layer? or should I clone just the whole environment? If possible, a link some with additional reading would be most appreciated.
  
  Thanks for any help.
  
  
  Andy.

  Hello

  You cannot configure the application for access to multiple databases at the same time. However, you can have multiple instances (CAR database) within a single application layer files - see (Note: 403347.1 - MAA road map for E-Business Suite) for more details.

  Kind regards
  Hussein

• CF 11 Enterprise multiple instances are not created correctly with a separate service account.

  The company that multiple instances are not created correctly with a separate service account.

  The questions that I have are very similar to the issues identified in the link below.

  https://forums.Adobe.com/message/6584848#6584848

  My company of 11 CF will not create additional services for my sites of cold fusion beyond the initial service created during the installation process. My problems are compounded because when I try and uninstall the CF11 Uninstalling application crashes and generates the error below. I now have to try to manually uninstall to reinstall CF11. Any help or suggestion to get the problem solved is welcome.

  Description:

  A problem caused this program blocking interact with Windows.

  Signature of the problem:

  Problem event name: AppHangB1

  Application name: javaw.exe

  Application version: 7.0.510.13

  Application timestamp: 52b25e38

  Hang Signature: 0967

  Hanging Type: 6144

  OS version: 6.1.7601.2.1.0.274.10

  Locale ID: 1033

  Signing of additional blocking 1: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 2: 2cff

  Signing of additional blocking 3: 2cff32d5db809ac6ce8170a1d7ac1eb0

  Signature of blocking additional 4:0967

  Signing of additional blocking 5: 09675b5d8f587c9fd57b85cb72e629da

  Signing of additional blocking 6: 2cff

  Signing of additional blocking 7: 2cff32d5db809ac6ce8170a1d7ac1eb0

  I solved the problem with the implementation of Cold Fusion 11. I had to disable Windows server 2008 R2 UAC for all users in order to complete the installation with IIS as a web server. This also solves the problem with the inability to uninstall Cold Fusion.

• How to configure multiple instances in CF9

  I'm having some problems with a couple of our intermediate servers that run multiple instances of CF9, and I do not know if they are properly configured. I have installed CF9 Enterprise multiserver and I created 4 additional instances by using the Instance Manager. I also created a virtual machine for each of them to use specific Java and re-recorded each service in order to use the custom Java virtual machine. In Apache, I added the following for each virtual server (by changing the serverstore and the port):

  < IfModule mod_jrun22.c >

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/muffin/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  < / IfModule >

  However, when the service is stopped for one of the sites, rather than get the JRun error 500 but it will return a CF error or the site will still ride. But if I stop the backend CF service he will kill all the sites.

  It seems therefore that all instances are still tied to the main service. Y at - it something that has not been configured correctly or something I'm missing here?

  I used this guide during the installation in place all the http://help.Adobe.com/en_US/ColdFusion/9.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fc4 .html

  Thanks for any help.

  Most of the time, everything seems as it should work.

  My jrunserver.store files all say the same thing as yours.

  Did you do a restart on Apache and CF just to make sure things are picked up correctly?

  A number of things you can try, but I don't know if it will make a difference or not.

  In each of your virtual servers, remove the

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  And just do:

  JRunConfig Verbose true

  JRunConfig Serverstore "C:/JRun4/lib/wsconfig/2/jrunserver.store".

  JRunConfig Bootstrap 127.0.0.1:51000

  Also add in "JRunConfig Apialloc false" to each of them. This will allow the stub to take memory from the operating system instead of Apache which is supposed to be safer.

  Let me know if any of these help not at all.

• Download iOS 10 update once for installation on multiple devices via iTunes?

  I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.

  Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.

  Almost certainly not.

  Each version of the product Apple has its own download.

• How can I hide/show toolbar again operate independently on multiple instances of firefox?

  I run two instances of firefox.exe. One for the left monitor and one for the right. There is a toolbar that I want to see on the right screen, but I don't want to see it on the left screen. This used never to be a problem, but it is now. It seems as if well now why show/hide toolbars are inextricably linked, and by changing or watching a toolbar on a single instance simultaneously causes the exact change even on the other open instance. I'm hoping that it could be a simple solution to this effect in the subject: config, however, I would rather not tamper with these settings until I'm sure that settings with the fix for this particular problem.

  Thank you for your attention and for taking the time to read this post.

  Sincerely;
  DC

  Toolbar settings are common to all windows open in this instance of Firefox.
  I don't know if there is an extension that allows to fix this dependent window, so you can check the website of modules.
  If you can't find one then you would use a second instance with its own profile.

  You can add - no.-distance to the command line to open another instance of Firefox with its own profile and run multiple instances of Firefox at the same time.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Question about multiple instances of Thunderbird running at the same time

  I read that when you start Thunderbird by clicking on its icon or the shortcut must only load once, even if you click on it several times. It should be just a window of TB. If I click on the shortcut/TB desktop icon, it behaves like that. I can click several times and that a single TB window will open and be active.

  However, if I run the 'quick launch' TB on my windows 8.1 (or no matter what windows) taskbar, I get mulitple TB windows to open, as much as I want. So if I click on TB icon in the quick launch once, I get a single instance of it. Twice, I get two, and etc. In the quick launch any program behaves like that. He starts programs with a single click and launch again and again.

  Only, I click it once and get an instance which is good and how it should be. But this behavior with the quick launch is ok? It must do this not with Thunderbird? Thank you.

  There is usually no advantage by running multiple instances of Thunderbird, unless specifically do you these race with different profiles. In practice, if they are allowed to use the same profile, the first Thunderbird should should acquire the profile and therefore block the others, although this may not become apparent until you try to salvage something, for example, a message, or to change certain settings.

  Your multiple Thunderbird work successfully? They all show the same mixture of accounts, folders and address books? Can all or part of them save and make changes?

  If this is the expected behavior, (i.e. some "typical" windows) I do not like; He does not play well with profile blocking and I think that lead to problems.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• running multiple instances of VBAI does not work

  Hello everyone,

  We are 4 common examples of VBAI at the same time. Recently, he had to copy it (because production is doubly).

  With our first system, we have no problems when you try to run multiple instances of VBAI. This time, however, it does not.

  Our system:

  • 4 cams: Allied Manta 201
  
  
  • camera is triggered (rising edge) separately, but almost simultaneously.
  
  
  • Four port NIC (with the right driver :-))
  
  
  • 4 ports and our on-noard port are bridged.
  
  
  • computer: intel I5 (4 cores)
  
  
  • License to run Vision Builder 2012.
  
  
  • Programmed with Vision Builder HAVE 2012.
  
  
  • Interface programmed in c# (receives images of the relevant info 4 programs and displays on the screen).

  Action taken:

  • Test with our program that opens 4 instances of VBAI. Result: 1 single instance opens.
  
  
  • Removed our bridge a connected our cams on a switch. Result: 1 single instance opens.
  
  
  • Open VBAI 4 VBAI-programs directly (but separately). Result: Each program opens and is fully working.
  
  
  • Open 2 programs at the same time (with VBAI). Result: Fist opens and is equipped with the work. At the opening of the second program, that we get error messages saying that it is not possible to connect with our camera.
  
  
  • The test above was created with:
  
  
  1. The cam connected to our network card 4 ports.
  
  
  2. The cam connected through a switch.
  
  
  • I have also written 4 simple programs (just enter a period followed by image)
  
  
  • With these programs, I tried the above test (VBAI 2 hours and run both programs at the same time). Same problem: 1programs starts, the error messages when opening a second program.

  I have the impression that it's a network problem, but what bothers me is that, when the bridge, I don't see a difference with our another computer that works on our original assemblyline. When you work on a referral that our parameters are the same as on a computer that does not have a network card 4 ports. The computer (and liked)) allows us to run multiple instances.

  Any thoughts?

  Any help would be greatly appreciated. I'm sure I'm missing something obvious here, but I don't really see.

  If you need more information about something, let me know.

  With sincere friendships.
  Tom Declercq

  
  

• Multiple Instances of the Application to access the same DAQ hardware

  I have a relatively simple application that reads from a device of data acquisition (OR-9205 connected to NI WLS-9163) wireless.  I would like to run multiple instances of the executable, but I get the error-201105 (resource reserved) as soon as the DAQmx task starts on the second instance.  Each instance tries to acquire different channels of the same DAQ hardware.  Is this a problem with the data acquisition device, or DAQmx in general?  Thank you.

  -Joe

  Hey Joe,

  Unfortunately, you can only one type of access channel with each program.  For example, you might HAVE a program access and another use AO, but you can't have two programs different AI the same access card.  It is common among all of the DAQ hardware to NEITHER.

• get all the screws in memory on multiple instances of application LabVIEW

  I try to get references to all of the screws in memory on multiple instances of LabVIEW application. Specifically, I'm trying to get the VI Refs screw (and their subVIs in memory) in another Explorer of projects at design time. (The other screws do not work.) For example, if you are only interested in VIs in the current instance of App (read the Project Explorer), you can use the following code:

  

  However, if you have multiple projects open, how can you get the references VI to the screw in the other project? It seems to me that it would be an another App Ref, but I guess I don't know how to get this reference. I'm assuming that if I could get this reference, I could use it in the same way as above for the list of App.AllVIs.

  Any help/clues would be appreciated. Thank you.

  I just tried the code below.  It runs in a single project; I have also open a second project with more than 300 screws and it opens a reference to each one without any error.  Are you the application instance reference wiring open Reference VI?

  

• Update loop under Vi of hand / run multiple Instances

  Hey everybody,

  If I want to keep my code as modular as possible so that I can see any sub or VI.

  One of the SUB vi is permanently offices incase another output is detected. I don't want to make this mark on the main level because I don't want a huge loop in my main.vi and you won't worry about sending shift register valuse to my Subvi for him to function.

  Essentially, I have designed this subroutine Vi and am now trying to constantly be driven from a main.vi

  This hand is simply.

  Cluster of entry--> Sub VI

  Void VI retains a loop waiting for a change request action. Unfortuantely when I change the vale in main.vi the avlues in Subvi don't update. I guess that makes sense, in C, for example when you call Returns you need to wait until the end of the function call to update. Yet, as Labview is so strongly focused on taking SUB vi to do almost everything for you, I can't imagine labview is not able to update these values. I looked around and the answer seems to be global variables. I really don't want to use the because my application will become very big, but I'll use them if I need to.

  Unforunately, when I tried to use my global variable thing, it didn't work.

  1. global Var = Cluster

  2. it's in the Subvi both the main VI.

  3. when I run my code the global variable is not up-to-date on both front sides when I change one of them. I'm doing something wrong?

  A few comments.

  • You have not included the global variable
  • If you want to run multiple instances of the Subvi in parallel, it must be reentrant.
  • As the Subvi is interactive, it must be configured to display the front panel when it is called, otherwise there is no way to stop it ever.
  • All your time loops needed little expects. They have no need to turn as fast as the CPU allows, all other processes of hunger.
  • "Go to under control" is extremely complex and crawling with weird stuff like an ant farm.
  • • The shift register must be initialized to avoid surprises (but you probably don't have it all)
    • Your loop runs one time too many.
    • Avoid the stress points, such as the structure of the case.
    • You can replace this whole thing with for example a table of threshold, no need to loop. (see image below).

  

  Good luck!

• multiple instances of internet explore in my task manager

  Why are there multiple instances of internet explore in my task manager when I open only one page?

  Hello

  IE uses smaller instances of itself to support tabs and correction of errors and it is normal for IE8. In fact
  It uses far fewer resources as well as the opening of 2 or more instances to access several pages. If you
  Open several tabs, and then still more small instances of Internet Explorer will be opened to support these tabs and error correction.

  So basically, everything is normal.

  Multiple Instances of iexplore.exe run when using Internet Explorer 8
  http://www.Winhelponline.com/blog/multiple-instances-of-iexploreexe-run-when-using-Internet-Explorer-8/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">