Error in newspaper

Similar Questions

• Error installing KB3000850 update (Error 80070002)

  Hello!

  I have a laptop Lenovo T431S Ultraportable with 8.1 for Windows 64 - bit installed with the latest patches installed. Windows works perfectly (with no significant error in Event Viewer / other logs). NOW, the arrival of this last patch (KB3000850), Windows is impossible to install this patch resulting in Error 80070002.

  What I tried to fix that:

  (1) run SFC (no errors, everything OK)

  (2) run Dism/online/Cleanup-Image /RestoreHealth - reported correction of errors (CBS-newspaper here; ANY DISM-created log file).

  (3) run this utility from Windows Update 'FixIT' tool (http://support.microsoft.com/kb/910336) that reported error setting (see image)

  (4) delete the downloaded files & C:\Windows\SoftwareDistribution\DataStore & C:\Windows\SoftwareDistribution\Download newspapers

  (5) restarted

  Tried to re - apply patch KB3000850, but still stops with Error 80070002 to approx. 50% progress of the installation.

  Someone else...? Advice / tips?

  PS. I had a similar problem with the 8.1 original update that has been resolved through DISM at the time, but it seems now may not have pass the error...

  Timo

  OK people,

  Establish a remote connection with tech online MSFT and the problem has been resolved in about 20 minutes by following the steps:

  (1) SFC/SCANNOW

  (2) executes a batch file specific reset.bat

  3) updated the KB through Windows Update in Control Panel (not the Metro UI W8)

  After priming and finalize, all & running!

  Great support experience!

  Detective Conan.

  Timo

• Error in the object HsvJournalsACM

  Hi guys,.
  
  I have problems with the magazines... Could you please help me?
  
  Some newspaper looks like it is displayed, even if its value is from 0 to entity Adjs currency in the report. When I tried to access the journal through the hyperlink, it gives this error:
  "The newspaper no longer exists in the system. The newspaper you are trying to load has been removed and cannot be processed. Error in the HsvJournalsACM object.
  But when I see the journal list, it is actually displayed.
  
  This could be a problem with the hyperlink? should I set up a certain way?
  
  Please, advise.
  
  Thank you!
  
  Kind regards
  
  JAI

  Hi Jai,

  Please check in Oracle Support error "error financial management"the magazine no longer exists in the system"what Journal opening details [ID 1087635.1]". It will be necessary to install a patch.

  See you soon,.

  Read

• Is unable to connect/add the host to the CR - error: another error occurred at line number 7, not well-formed (invalid token)

  Hello!

  Having a problem with a server ESX 3.5 and VC2.5. Two days ago it became (not answer) in VC and I could not reconnect. Using VI client I can connect directly to the host. I ping the ESX other EWX hosts and to the client with VC.

  I tried mgmt-vmware restart and restart av vpxa. A restart of the ESX host has not helped.

  I have her disconnect the ESX and when trying to connect, I get the Connection Wizard, but when you add the server name and root I get an error saying:

  General error: another error at line 7 number, not well-formed (invalid token) and cannot continue.

  I saw another discussion in the forum saying ban the CDP but that did not help.

  After removing the server ESX of VC, I'm trying to add hos, but run into the same error. I see no particular error in newspaper except errors in certificates, but I'm not sure that that's about it.

  It's one of the things that I read in the newspaper about the VC client:

  Unexpected error connecting host host3.kun.local: incomplete header received

  GetChanges failed on the host /vpx/host/#7863 /: vim.fault.NoHost

  Set the error code of connection (-2) for the host host3.kun.local

  Anyone with any ideas what to look for?

  I'll try to remove vpxa and vpxauser # rpm - e Vmware-vpxa and # userdel vpxuser and see what happens.

  Carpet

  That's good news, glad to hear that the problem has been resolved.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• Error when running in jdeveloper application

  Dear all,
  
  When I try to run the application in jdeveloper it gives me error follwing newspaper.
  Any body can help me on this...
  
  < 25 January 2011 18:39:52 IST > < error > < JDBC > < BEA-001553 > < could not deploy JDBC data source conMessages. No credential Mapper entry found for messages the indirection user password >
  < 25 January 2011 18:39:52 IST > < error > < hats > < BEA-149205 > < could not initialize the application "fileupload" due to the error weblogic.application.ModuleException:.
  weblogic.application.ModuleException:
  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:507)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
  Truncated. check the log file full stacktrace
  
  Caused by: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: java.security.PrivilegedActionException: weblogic.common.ResourceException: no entry credential Mapper found for user password indirection = messages for data source conMessages
  at weblogic.jdbc.common.internal.DataSourceConnectionPoolConfig.getPoolProperties(DataSourceConnectionPoolConfig.java:85)
  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1109)
  at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:147)
  at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:385)
  at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:326)
  Truncated. check the log file full stacktrace
  
  
  -Thank you

  I think the default location is C:\Users\\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\

  You can try to remove the DefaultDomain directory from there to start (instead of destroying the entire system directory)

• Windows 7 freezes the first time I turn on my pc

  Hello

  Every day I turn on my computer for the first time, my windows 7 freezes and I have to do a hard reboot, so I can use my pc normally.

  I do not get a blue screen... windows only remain with jelly screen (it can still freeze for hours), without error, without newspaper... I don't know what to do to understand what is happening.

  Any ideas?

  Thanks in advance.

  David

  Hi David,

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  When the computer is turned on, it freezes.

  To work with the issue, I suggest you check out the site:

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286?WA=wsignin1.0#method22

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For any question related to Windows, feel free to contact us.

• Jabber for Telepresence blocked on "connect to..." »

  I had my computer company team check, fix my connection settings (I can ping the internal/SIP Server Server/external domain), but my connection always fails when you attempt to connect to the server.  Tried a different user account, but has the same problem and could not connect. I tried to stop my Windows Firewall service (7) and reinstall/repair of the Jabber for telepresence app, but it remains impossible to connect. Is there anything else I can try? The company VPN is not the issue, because other users can connect successfully from their PC. It seems that the problem is local to my PC, but it's just a new, default basic install Windows 7 x 64. Is there a install logs that I can check for more information on the failure of the connection? Any ideas?

  Thank you

  See attached pdf for how to make debugging (it says Win XP, but it is the same procedure for Win 7), it might give you a clue as to what's going on - however, if your connection attempt is actually hitting the server, then your COMPUTER team should be able to see this, and any associated error , the newspaper of the VCS.

  /Jens

  Please note the answers and score (s) questions such as "answered" as appropriate.

• The unit is completely useless?

  I'm at my wit's end, so I'm begging anyone for help here.

  The unit mode used to work, but now it doesn't.  I tried to reinstall the invited drivers, reinstall the video drivers from the host and even upgrade to player 3.0.1 to 3.1.  I did a fresh install of XP as a test and still no-go.  The host is XP Pro x 64.

  Entering the mode of the unit, the start menu comments thing appears, and I can use this menu to select an item, like saying 'my computer '.  The client workstation does not, but if I leave the mode of the unit, it is here, on the desk of the guest.

  Any idea what would cause this?  There is no error, no newspaper, no nothing.  The virtual machine will enter the unit in mode, but simply not display all windows on the desktop of the host.

  Many thanks in advance!

  Some of our users 7.1 beta discovered that some software is blocking communication between the drive and the virtual computer that is necessary for the work unit. That's why no unit windows appear.  Try the suggestions in these two threads and let us know if they solve the problem for you:

  http://communities.VMware.com/thread/267578

  http://communities.VMware.com/thread/265066

• All virtual machines down due to problem of firmware - update firmware HBA

  Hello

  Before the explanations, here's the context:

  At least 4 servers ESX version 3.5 u4. All HP Blade 680c G5 with HBA Emulex LPe 1105 (a Firmware 2.72)

  On 19 August, we experienced a disconnect on 4 servers san blades in the same case. (Our fault, it is an isolated cluster and all the virtual machines are down, bad luck )

  I opened a SR at vmware and they statufie it was a hardware failure.

  Here are the logs, which appeared at the same time on the four ESX servers:

  19 August at 19:30:39 esx3 vmkernel: 29:08:52:41.233 cpu6:1235) StorageMonitor: 196: vmhba3:2:9:0 status = 2/0 0 x 5 0 21 x 0 x 0

  19 August at 19:30:39 esx3 vmkernel: 29:08:52:41.233 cpu6:1235) & lt; 4 & gt; lpfc0:0457: INe hardware error data: adapt: x 40000000 x7ff88 x6000000f

  19 August at 19:30:39 esx3 vmkernel: 29:08:52:41.335 cpu6:1235) StorageMonitor: 196: vmhba3:2:22:0 status = 0/1 0 x 0 0 x 0 0 x 0

  Error code lpfc:0:0457 seems to point to:

  "INe 0457: card hardware error."

  DESCRIPTION: The pilot received a break charge a possible hardware problem.

  Data: (1) status status1 (2) (3) status2

  SEVERITY: error

  NEWSPAPER: always

  ACTION: This error could indicate a hardware or software problem. If the problem persists, report the error to Technical Support. »

  FC http://www-dl.emulex.com/support/solaris/602h/pdf/manual.pdf

  After you open a call to HP, they said that we must upgrade to the latest version of the firmware, 2.80a4, available since 14 AUGUST 09 (!) - and no reported similar problem...

  Now, I'm trying to upgrade my firmware on all ESX servers in all speakers...

  I'm looking for just the best way to do it, because it seems that it is no longer possible to do with lputil.

  HBanyware seems to be the best solution, in fact, I'm working on it with our team of SAN...

  I would be interested in some good links and of course if someone had the same kind of problems?

  Best regards

  Patrick

  Hiya,

  There is a new version of the software downloadable hbanyware from the emulex website that works more precisely with esx3.5 u4.

  (lputil is no longer supported with esx 3.5 u4)

  It's a bit of pain to use compared to lputil, you must specify the name WWN in most the hbanyware orders well.

  I found it easier to allow remote through the ESX hbanyware Firewall (see readme with hbanyware for syntax) then administer them all the hbanyware running my Windows VCB server remotely.

  Jordan

• TNS-12518

  Hello world
  
  Operating system windows 2003 Server
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0
  
  After the start of the database a few days my database work properly after a few days I got following error
  the newspaper of the listener
  
  April 1, 2010 04:32:02 * (CONNECT_DATA = (SID = ORCL) (SERVER = DEDICATED) (CID = (PROGRAM = C:\Program Files\AgeTak\ARCEAC\ARCMultiplexer\ARCMUX.exe)(HOST=BDIPL28)(USER=BDIPL))) * (ADDRESS = (PROTOCOL = tcp (PORT = 4867))(HOST=192.168.1.28)) * establish * ORCL * 12518
  
  TNS-12518: TNS:listener could not hand off client connection
  AMT-12560: TNS:protocol adapter error
  AMT-00530: Protocol adapter error
  32-bit Windows error: 233: unknown error

  Possible solutions:
  * In listener.ora set DIRECT_HANDOFF_TTC_LISTENER = OFF
  * If you are in shared server mode, try to increase the size of the large pool
  * Avoid swapping memory on the server.
  * If the log file for the listener being great, try to delete it.

• Sync has encountered an error during synchronization: unknown error (GET 503 failure in newspaper)

  I get an unknown error while firefox is trying to synchronize. The newspaper is available at http://pastebin.mozilla.org/6474503

  I have disconnected/reconnected, created a new profile, but the error persists.

  Thank you in advance!

  For info, please do not comment in this bug report unless you can add relevant information that could help anyone look into this.
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1067148

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Crash when updates at shutdown lead Error message 'one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. »

  Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.

  Hello

  • Your computer is on the field?
  If it is connected to a domain, then you can post your query in this link:
  http://social.technet.Microsoft.com/forums/en-us/categories
   
  If it is not then what is the error message in the history of the magazine update on the windows update site?

  See also fix it for windows updates.

  http://support.Microsoft.com/mats/windows_update/

   

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Page always showing loading and newspaper showing the error when processing viewId

  Hi all
  
  I use JDev 11.1.1.5.0.
  
  I have 2 projects. One is the main project and the other project is deployed as a 'library of workflow' for the main project. The project included uses the objects in view.
  
  In my main project page, I put the workflow of another project in the region. The problem is when I run my page to the main project, the page is not displayed, and it is always showing loading icon. That's what I found in the newspaper:
  
  * < Treatment UIXRegion > < _warn > error viewId: GraphView/GraphView1 URI: /WEB-INF/com/ui/view/graph/form/GraphView.jsff real-URI: /WEB-INF/com/ui/view/graph/form/GraphView.jsff.*
  java.lang.NullPointerException
  at oracle.adfinternal.view.faces.bi.renderkit.imageView.RichImageViewRenderer.encodeAll(RichImageViewRenderer.java:846)
  at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
  at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:335)
  org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd (UIXComponentBase.java:767)... and a lot of other lines
  
  Could you please help me with this problem of 'viewId error handling? Thank you very much.
  
  Best regards
  
  cmoster

  is this happenning, if you don't have a graphic... If it works fine. then there is something which is problematic in your graphical implementation...