error in node.js

Similar Questions

• error of node (arg 1) .vi property VISA set up a Serial Port (Instr)

  Hi all

  I have a request, he had run on a machine well for months.  I use VISA to make the communication between PC and PIC.

  Suddenly at certain times, it reports error of node (arg 1) VISA property set up a Serial Port (Instr) .vi. Since then, it does not work.

  Œuvres of HyperTerminal.  I check MAX, the COM port it and looks very good.  What is the problem?

  Furthermore, I use VISA 4.2.  Maybe somehow it crashed?

  Many thanks for any help.

  Problem solved.

  The reason is that the hard disk was running out of space and there is error.  Somehow, causing accident DURATION VISA.

  We cleaned drive C: for free space and then repaired DURATION VISA.  Now, he runs with happiness.

  Thank you, everyone, for your help.

  

• ORA-27504: error of IPC create context OSD - error on nodes RAC times

  Hello
  
  I did Rman cloning Linux 3 (32-bit) for Linux 5 (64 - bit) with success. Then settings of cluster enabled in pfile (two-node Rac) and autoconfig enabled for two databases ORACLE_HOME because it's the Oracle Applications database.
  
  VERSION OF DB - 10.2.0.2
  CRS - 11g
  Linux version - Red Hat Enterprise Linux Server version 5.4 (Tikanga)
  Application version - 11.5.10.2
  
  I am new to cars and this database is up and working now, I see that following error messages in the alert log of the two instances at each start
  
  **********
  Thu Jan 20 07:33:35 2011
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  Thu Jan 20 07:33:35 2011
  Errors in the /u01/app/oracle/admin/udev/udump/udev1_ora_28252.trc file:
  ORA-27504: create context of OSD IPC error
  ORA-27300: OS dependent operating system: skgxnqtsz failed with status: 0
  ORA-27301: OS Error Message: error 0
  ORA-27302: an error: SKGXN not av
  clsssinit ret = 21
  interconnection there is no OCR information
  WARNING: No cluster interconnect has been specified. According to the
  the communication configured cluster traffic Oracle driver
  may be addressed to the public interface of this machine.
  Oracle recommends that the RAC grouped be configured databases
  with a simple soldier of interconnection for security improved and
  performance.
  SNA system picked latch-free 3
  With the help of LOG_ARCHIVE_DEST_1 parameter value default as/u01/app/oracle/product / 10 g 2, db, dbs, arch
  Autotune undo retention is enabled.
  LICENSE_MAX_USERS = 0
  ****************
  
  Please let me know if I have to put the DB services to the cluster.
  
  Thank you
  Muhammad Tanveer

  Hello

  11.2 or 11.1 clusterware is?

  If it's 11.2 see Please note:

  Pre 11.2 Database issues in environment Infrastructure grid 11 GR 2 (Doc ID 948456.1)
  https://supporthtml.Oracle.com/EP/faces/secure/km/DocumentDisplay.JSPX?ID=948456.1

  Concerning
  Sebastian

• ISE Admin error replication node

  Hi all

  Sometimes I receive this alarm:

  Alarm

  Has taken place at:	Thu Mar 20 09:20:10 BRT 2013
  Cause:	Replication stopped
  Details:	Order of replication for the host (node Secundary Admin) PANVMGP3301B

  Today, I go to Administration-> system-> deployment and I can see my secondary node of Admin/analysis with status "DISABLED REPLICATION" picture to attach it.

  I can force the synchronization for the primary and secondary Admin nodes? How can I fix?

  TKS!

  Yes, something is preventing your nodes to stay in harmony and accordingly, the nodes stopped trying to syncup. You will need manually synchronize the nodes. Go to Administration > deployment. Select / check all nodes, then click on the button "Syncup" above the personas.

  Thanks for the note!

• MathScript node: an error internal mathscript: 64-bit LabVIEW 2009

  Hi people.

  I have an installation now LabVIEW 2009 9.03f, Vision and Advanced Signal Processing Toolkit, all 64-bit versions on a new computer, so that I can convert a code from 32 to 64-bit.

  I tell myself that I will address the errors one by one and this is the first.  I have a VI with mathscript node and the VI, who instructed and ran very well in the 32-bit environment, is now broken and giving the error "mathscript node: a mathscript internal error."  My main concern - is mathscript unsupported in LabVIEW 64-bit right now?

  I enclose the VI.  Any ideas are appreciated.  I need to get this working.

  In addition, NEITHER is there a special forum of 64-bit we should publish in the future, or create to post on?

  Sincerely,

  Don

  2009 help

  LabVIEW MathScript is a language based on text that you can use to write scripts and functions. You can process the scripts using LabVIEW MathScript in the Window of LabVIEW MathScript or a MathScript node. When you create a LabVIEW MathScript, you use data types supported.

  The MathScript syntax is intuitive and logical syntax essentially based on the standard mathematical and computer programming terms, mandate of widespread and common use truncation or descriptive abbreviations and concatenations of standardized terms. The Window of LabVIEW MathScript and MathScript nodes are able to process files that you create using the MathScript current syntax and, for backward compatibility, files that you created using legacy MathScript syntaxes. The Window of LabVIEW MathScript and nodes MathScript can also process some of your files using other textual syntaxes, such as files that you created by using the MATLAB® software. Because the MathScript RT Module engine is used to treat the scripts in the Window of LabVIEW MathScript and MathScript node, and the MathScript RT Module engine can't stand any of the syntaxes, not all existing text scripts are supported.

  (64-bit LabVIEW) LabVIEW MathScript is not supported in LabVIEW (64-bit).

• Writing DAQmx invoke node leads to a runtime error (R6025 - pure virtual function call)

  I have a request in which a Subvi DAQmx writing calls calling node (shift of writing and reading NumChans).

  When I launch LabVIEW and the main VI a first run, everything works fine. When I run a second time, LabVIEW crashes with a runtime to Scripture DAQmx error call node:
  R6025 - pure virtual function call

  The LabVIEW failure log file contains the following lines:
  c:\builds\penguin\labview\branches\Saturn\dev\source\compiler\allocsup.cpp(662): DWarn: dataspace moved running!
  $Id: //labview/branches/Saturn/dev/source/compiler/allocsup.cpp#18 $

  Anyone has any idea how this accident could be avoided?

  Problem solved: we have just removed the line NumChan (read) from the node to invoke and readded it again. Now, it works fine.

• AAM error on the node [home]

  Hola,

  I have a stupid wires 2 servidores con fisicos ESX y ellos uno, reiniciarlo, no arranca tras. During the fair to dando los errores following is:

  -AAM error on node: [host] Mon Mar 9 12:20:...

  AAM Error MESSAGE: Failure detection 192.168.15.16 invalid IP address, correct

  AHI leave tras unos durante... 10 o 15 minutos, arranca, pero el virtual Center no communication con el...

  Alguna sugerencia?

  Gracias!

  Hola Pablo,

  AAM (Automated Availability Manager) is the officer that VMWare instala in host ESX cuando el habilitas HA.

  Por alguna razon officer ese no esta extracting como debiera don't con lo you sugiero remuevas ese ESX Cluster HA del servidor y lo vuelvas a include.

  También restore el agent via vCenter el HA.

  Saludos,

  Jose Maria Gonzalez,

  The blog of Virtualizacion en Español

  -

• DAC message any plan of running - "Error when loading nodes"

  I just install and configure Informatica 8.6.1, DAC, BI apps 7.9.6 properties for an instance of source Oracle Ebs R12.1.1
  
  In informatica, I've defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names in the DAC's physical data sources
  
  I mentioned the flatfile as 'ORA_R1211_Flatfile' parameter in DAC
  
  After successfully build, when I run the ETL error "Error loading nodes" occurs.
  
  the log file shows the following:
  
  **********
  BEGINNING OF ETL
  
  --------------------------------------------
  20 SEVERUS Sat Apr 23 21:57:58 GST 2011
  FAULT INFO: Error loading of nodes.
  CLASS EXCEPTION: java.lang.NullPointerException
  
  com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
  com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
  com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
  com.siebel.etl.engine.core.ETL.run(ETL.java:658)
  com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.executeEtlProcess(EtlExecutionManager.java:210)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.run(EtlExecutionManager.java:165)
  java.lang.Thread.run(Thread.java:619)
  21 SEVERUS Sat Apr 23 21:57:58 GST 2011
  ************************************************************
  CLOSING THE CONNECTION POOL Data Warehouse
  
  ************************************************************
  
  SEVERUS Sat Apr 23 22 21:57:58 GST 2011
  ************************************************************
  CLOSING OF THE CONNECTION POOL ORA_R1211
  
  ************************************************************
  
  23 SEVERUS Sat Apr 23 21:57:58 GST 2011
  --------------------------------------------
  
  END OF THE ETL
  *****************

  Hello

  Mark the current as EP being completed and re - assemble portion, build parameters, and generate the EP and run charge.

  Thank you
  Navin KumarBolla

• Property node (arg 1) visa set up a Serial Port (Instr) .vi-> Untitled 1. VI

  Hello

  I'm trying to connect an instrument stahl ER-300 with labview. The Stahl is connected to my laptop via a serial port/USB converter.

  When I run the program, I get this error property node (arg 1) visa set up a Serial Port (Instr) .vi-> Untitled 1. VI

  the driver of the converter is set up and my phone is read as a COM4 and I Don t understand why I get this error.

  The program is attached.

  I need your help

  The error indicates that an input parameter is not valid to configure serial port VI... have you checked that you had wired up to this node correctly?

  Down VI serial port configuration and...

  

  It is not wired! Thread resource name VISA through the VI.

• mathscript node Mac could not compile

  I just installed LabView 2009 SP1 on Mac OS X (Snow Leopard), as well as MathScript, who can't do much beyond a simple assignment.

  A simple if-else structure will work if it performs only scalar assignments, drunk, trying to create a simple 1 d of table within a node structure MathScript (x = 1:1:10) causes VI to break with the error ' MathScript node: VI failed to meet. "

  Similarly, try the following commands in a MathScript window all give "error at line 0: an internal error occurred during the processing of this MathScript.» Contact National Instruments with the MathScript you used. »

  t = 1:1:5

  t = linspace (1,5,1)

  help linspace

  It's not yet the command help. The only thing that works is something like x = 5 or x = sin (2.2 * pi).

  I am aware of these two articles, or which is applicable for Mac or for 2009 SP1:

  59AH3P4A Knowledge Base: Causes of failure Compiler Error with MathScript node

  553C13WI knowledge base: Detection screw instantiation corrupt and MathScript node failed to meet Er...

  The second section offers a few folders to delete, which I've tried. The other does not exist on install Mac. Needless to say that the utility to find corrupted instantiations is not useful here.

  Thanks in advance for your suggestions.

  Tom

  Inches,

  Is that you improved in 2009 SP1 MathScript RT? The 2009 version of MathScript won't work with LabVIEW 2009 SP1.

  Thank you

  Scott K

• call library function node - function not found

  When you create a DLL, I get a error Labview "node"LabviewReceiverDLL.dll:readDataJ1939Data "function not found." call library function Everything looks good to me and cela used to work, even if I changed computers since then.

  This is the beginning of my C++ code just to show my name of the function. I've also attached the function of the library calls window to show my setup.

  Thanks in advance for your help.

  #include "StdAfx.h"

  #include

  / * Call library source file * /.

  extern "C" __declspec (dllexport) unsignedint readDataJ1939Data (unsignedint, unsignedint, unsignedchar, unsignedchar * canData, unsignedchar path);

  unsigned int readDataJ1939Data (ulTimeStamp, ulIdentifier, unsignedchar uiDataCount, unsigned char unsignedint unsignedint * canData, constchar path)

  {

  I've recreated the DLL and Labview library node call and now it works.

• Failure of the upgrade of data Global ISE ISE 1.3 upgrade error!

  Hello

  Has anyone encountered this problem? When you upgrade, it seems to start all the wells, but then this happens:

  -Data Update step 40/67, CertMgmtUpgradeService (1.3.0.616)... % error: data ISE overall upgrade failed!

  Restore the configuration database...
  Start the application after cancellation...

  % Error: the node has been restored to its state of pre-upgrade.
  Upgrade or install application % cancelled.

  I also upgraded to the latest patch and tried again, but nothing helped. It is a device (3415) which comes with 1.2. It is not configured other than the wizard of initial cli. I upgraded a devices fair bit, but I have not seen this problem came before. Any thoughts?

  Thanks in advance for any info...

  If it is a test of the configuration you can make cool install.back ISE in existing config and restore it to 1.3. If his production then contact TAC

• [Generator] Error: binary flitetranscoder is missing.

  Hello

  I'm moving my baby steps in generator plugins, and I happen to encounter the following error:

  node of $ app - f... \plugins

  [debug: core 22:54:39.893 generator.js:105:17] Launch with config:

  {}

  [Warning: core 22:54:42.843 generator.js:208:37] binary flitetranscoder is missing. Flite feature will be unavailable. {[Error: ENOENT, stat ' / Photoshop 2015/Adobe Photoshop CC CC 2015.app/Contents/MacOS/flitetranscoder/Applications/Adobe']}

  errno:-2,.

  Code: "ENOENT"

  path: "{/ Applications/Adobe Photoshop CC 2015/Adobe Photoshop CC 2015.app/Contents/MacOS/flitetranscoder'}"

  Then, apparently, everything is happening as planned.

  So, anyone happen to know that flitetranscoder is and why it might be missing?

  The only mention of it I could find is here: support for flite perform encoding of image by chrisbank · Pull Request #317 · Adobe-photoshop/generator-core · GitHub

  As far as I understand, it is an alternative to ImageMagick to perform bitmap stuff (and so is implemented in the generator, but not available in PS?)

  Thank you!

  Davide

  The ability to use the transcoder flite (instead of ImageMagick) is if all goes well to come in the next version.

  However, 'master' in github (attempting to use flite if exists) is backward compatible - if it finds flite, he simply returns to use ImageMagick. So, in other words, the present warning in this issue can be ignored if you use Photoshop 16.0. (The fact that it says "Error" in the warning text is definitely a bit misleading - that the error string is simply the answer we get when looking for flite).

  Of course, if developers want to work against the version provided with the ps 16.0, it is an option also. As has been pointed out by Justin, which is available at the branch of ch - 16.0.0 - version.

• "General system error" when you try to create a host profile

  I have a cluster including 3 ESXi 5.5 knots. I'm trying to implement the compliance of the profile on this cluster, but I am not able to generate the host profile, use one of the nodes in the reference host.

  The error on nodes 1 and 2 is:

  A general error occurred:

  Call "HostProfileManager.CreateProfile" to "HostProfileManager" object on the server vCenter Server '< vcenter server >' failed.

  The error on node 3 is slightly different:

  A general error occurred:

  Call "HostProfileManager.CreateProfile" to "HostProfileManager" object on the server vCenter Server '< vcenter server >' failed.

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 1 to 256

  Specified value is out of range. Range: 0 to 16

  Anyone has an idea why I am unable to generate these profiles? I added the other stand-alone hosts (in other data centers) to test and I am able to generate profiles of those without problem. I tried to take one of the above 3 nodes in the cluster to generate the profile, but I got the same errors as above.

  I was getting exactly the same problem in my environment who you are. Here's a knockout that help me solve the problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2065692

• the nodes are not clusterable

  Hi all
  IAM getting the error specified nodes are not clusterable, when I install clusterware, I followed the document below and also used the same values specified in this document
  
  http://Oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnWindows2003UsingVMware.php
  
  
  I have the following entry in my host file
  
  # Public
  192.168.2.101 rac1.localdomain rac1
  192.168.2.102 rac2.localdomain rac2
  #Private
  192.168.0.101 rac1 - priv.localdomain rac1-priv
  192.168.0.102 priv.localdomain - rac2-rac2-priv
  #Virtual
  172.168.2.111 vip.localdomain - rac1 in rac1-vip
  172.168.2.112 vip.localdomain - rac2-rac2-vip
  
  
  any help will be much appreciated
  Thank you.
  
  Kind regards
  Satish.J

  Hello

  Ensure that your public network interface is listed first order in the adapter and network (right click-> properties-> advanced network Favorites) connections

  See you soon
  FZheng