Error in the register EPM system in the validation report generated

Similar Questions

• Error: Could not find the validation report with ID: 87

  I wrote a validation rule in FDM as below, attached this rule to the place. Once I have import data, validate, export and click Check, the system throws an error message stating "error: found no validation report with ID: 87. Not sure what needs to be done.
  
  The rule I wrote is 520000 ~ ~ > = 0
  This rule says that if the amount 520000 account is greater than zero, then only load it. otherwise, generate a report.
  
  Any suggestions?

  You must ensure that you have imported the Reports.xml file in the application of FDM. In addition, you want to connect to the application using the established customer and click on the reports tab and expand the English > reports check and do a right-click on the control of report and choose "set as Validation report.

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Don't Customize no found error in the data report

  4.2.1

  THM:24

  Hello world

  I have a page with a few traditional reports. When the underlying sql returns no data, it throws the standard message 'No data Found' in this part of the report. Is there a way we can further customize by adding something don't like - no found data because it has selected the range?

  Someone has done this?

  Thank you

  Ryan

  Hi Ryan,

  Under the attributes report, scroll down to the section "Messages". Here, you can change the "when no. found data Message", which is set by default to 'no data available '.

  Kind regards

  Vincent Deelen

• My incoming mail 'outlook' works very well; However, the outgoing never pass. I get an error with the State report. What gives?

  My "Outlook" or "Outlook Express" never seems to complete an outgoing message.  I get very well.  When I try to send, there is an error message.  What gives?

  Hi BrendaJones,

  1. What is the exact error message you get?

  I suggest you try the steps from the following link and see if that helps.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• Error in the validation data source

  I install LivCycle on SUSE 10 with Weblogic 11 g and Oracle 10.

  When you try to post, the following error occurs:

  Validation of datasource...

  DataSource fail

  Name: IDP_DS

  JNDI:IDP_DS

  Invalid data source settings. Impossible to find/search for IDP_DS data source. The data source cannot be configured or may have failed to get in line or is not accessible outside the LiveCycle application.

  ALC-LCM-120-301: invalid data source settings. Impossible to find/search for IDP_DS data source. The data source cannot be configured or may have failed to get in line or is not accessible outside the LiveCycle application.

  DataSource fail

  Name: RM_DS

  JNDI:EDC_DS

  Invalid data source settings. Impossible to find/search EDC_DS data source. The data source cannot be configured or may have failed to get in line or is not accessible outside the LiveCycle application.

  ALC-LCM-120-301: invalid data source settings. Impossible to find/search EDC_DS data source. The data source cannot be configured or may have failed to get in line or is not accessible outside the LiveCycle application.

  Any ideas?

  Thank you!

  Using secure data sources?  More details here:

  http://blogs.Adobe.com/LiveCycle/2010/04/livecycle_on_weblogic_-_securi.html

  http://blogs.Adobe.com/LiveCycle/2010/09/increasing-WebLogic-as-JDBC-connection-pool-size-pour-LiveCycle-Contenu-services-ES2.html

• The importer reported a geniric error

  Hello

  I can't download any file in my first items 10. get the error message "the importer reported a geniric error." He used to work fine before (I downloaded file even earlier). My laptop was crushed. So I restored and reinstalled PE10. I lost my serial number original PE10. Got the new issue of the Tech Support series. Now, I can not download any file. I see a lot of discussion on the same topic. but it seems that nothing is resolved. Please help me.

  Thank you

  The Anji

  We begin with General information.

  What operating system is your first items 10 working on? And, your computer uses an NVIDIA GeForce video/graphics card card.

  If a NVIDIA GeForce card, then stops and let us know. There is a serious problem first Elements 10/NVIDIA GeForce which is corrected by roll back the driver version of the card about may 2013. We need exclude this factor or back before considering other ways of solving problems.

  See the ad at the top of this forum.

  What are the properties of this file which was compatible with first Elements before 10, but is not now?

  Video compression

  Audio compression

  Size of the image

  Frame rate

  Interlaced or progressive

  File extension

  Format of the pixels

  Brand/model/parameters of the camera that records video might give us the information we need. How long ago

  What was all this work?

  What project preset are you affecting match the properties of your source media?

  Then the usual... latest version of QuickTime installed... and you are running a user account with administrative privileges and also have applied run them as administrator?

  Let us start here and then look at the troubleshooting plan.

  Thank you.

  RTA

• Validation report for the calculation of the account

  Hi all
  
  I am using FDM 11.2.1.0 and I came across a little problem.
  
  When I'm loading data through the workflow once I reached the verification of my report of validation step does all the data.
  
  For example my validation rule is
  
  (Total) 1 = (Total counts) 2 + (Total counts) 3
  
  With values of 15 = 7 + 8
  
  But when the validation report it comes out doesn´t have all data concerning accounts, it says 0.0 (I know because I am also show the values of Auditors not only the final operation).
  
  I was reading the manual and saw something on the validation feature, once I added the entity validation, calculation worked.
  
  The thing is if I believe there is no need for features of validation in order to rethink the role of the calculation. Or I understand entirely the manual?
  
  Note: The Force calculations under integration options option is checked for the
  
  Thanks for your help

  A location of FDM is not a related entity of Validation in order to load data to HFM of FDM. However, if no entity is provided in a request for data HFM, HFM how what intersection to come back? An entity is required for any request data HFM. Therefore, in order to extract data for the audit report, the location of the FDM must have a rated entity of Validation. In addition, unless the Validation rules focus on members at the level of the base of all dimensions HFM, box to consolidate the Validation of the entity should be checked to produce data in HFM at intersections that you post. In addition, audit shows only data for Validation entities "on the report" box to checked.

• Create a TXT file with header & trailer from the existing report

  Can someone show me please how to get Application APEX to spit a .txt file which will have a header and information as well as the report. Working on a project where the information is entered on the APEX and the report is unloaded in a specific format in notebook must be downloaded into the SAP.
  
  Looking for a better automated way to do it. See the example below. the first line is at the head of the column, is then the header, then the body (report) and finally the trailer down.
  
  Note: the information header and trailer are pre-formatted text and calculations.
  
  Thank you
  
  
  
  
  Document Date reference invoice number freight
  
  H _NONPOTEST 02092006 NONPOINV
  05012005 E02082006bb.00.00 103200
  05012005 E02082006bb.00.00 103200
  05012005 E02082006bb.00.00 103200
  05012005 E02082006cc.00.00 239801
  NONPOTEST T 6 3000.00

  It will NOT work as a report of the APEX. You are bypassing the bu report generator this. If you want to build this using Report Designer, then you will need to redefine what you're after, given that the report generator is NOT default to the creation of text files... He can build a CSV file based or PDF with the right software installed on your server...

  Thank you

  Tony Miller
  Webster, TX

  Published by: Tony Miller 24 Sep, 2010 14:55

• After the repair system now get Validation error

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: blocked VLK
  Validation code: 3
  Code of Validation caching: n/a
  Windows product key: *-* - 3R89F - D2KXW-VPK3J
  Windows product key hash: Ro / Y7HENE9CfW7lW + QtlNbYQEE8 =
  Windows product ID: 76487-640-8365391-23209
  Windows product ID type: 1
  Windows license type: Volume
  The Windows OS version: 5.1.2600.2.00010100.2.0.pro
  ID: {E1E586D7-D985-40D5-B72B-B417194240BE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching the result: 3
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings:
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E1E586D7-D985-40D5-B72B-B417194240BE}1.9.0027.05.1.2600.2.00010100.2.0.prox 32*-*-*-*-VPK3JS-1-5-21-839522115-299502267-214717958776487-640-8365391-232091MICRO-STAR INTERNATIONAL CO., LTDMS-7313American Megatrends Inc.. V1.0 20080218000000.000000 + 000CC76347F0184E0780c 090409AUS Eastern Standard Time(GMT+10:00)03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13B7D: TRUE C & C INC
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  * original title - had repaired system and get validation error have an oem disk how cai I enter the appropriate key (repairman has closed the store) *.

  Hello

  It seems that the license Volume (VLK) key has been blocked. I suggest you to check the links below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/thread/cbb60c8c-0c83-4601-90b3-19a1c24cd6f6

  http://social.Microsoft.com/forums/en-us/genuineoffice/thread/6d13cbed-0e23-489F-a0f8-e4fef52659a9

  Apart from that, I suggest you to report your query in the TechNet forums to get help. Click on the link below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "unable to register the DLL/OCX: Regsvr32 failed with exit code 0x5" when installing a WinUtilities

  Hello

  After the installation of WinUtilities, I get the error: failed to register the DLL/OCX: Regsvr32 failed with exit code 0 x 5.

  My system is Windows XP.

  Are there any missing service or not started?

  Thank you.

  Access the Run item on the start menu and type:

  regsvr32

• Error message: the 'Microsoft.Jet.OLEDB.4.0' provider is not registered on the local computer.

  Hello

  I've successfully installed the NCLEX - RN 4000 on Microsoft Windows 7 Home Premium edition. However, I get the error message "the"Microsoft.Jet.OLEDB.4.0 provider is not registered on the local computer"whenever I try to open the program.» The package says that the software is compatible with versions of Microsoft Windows Vista and XP. I tried to open the program using program compatibility issues resolution which did not work. I also do a right-click on the icon and choose Properties/compatibility and then selected the most recent Microsoft Windows OS program is compatible with and apply the settings. To my dismay, it was also a no go. I did some research and reading that Microsoft Windows 7 Home Premium 64-bit is not compatible with the programs .msi. So, I checked and found out that the file ends by .msi.

  With all that said, these are the questions that I find myself with:

  What can I do to fix this so that I can use my 4000 NCLEX-RN program?

  Why Microsoft Windows 7 is not backward compatible?

  Any help with this problem would be greatly appreciated!

  Thank you very much!

  UPDATED: Wednesday, April 21, 2010

  If someone else has the same problem when you try to run the NCLEX-RN 4000 program on the Windows 7 operating system, you will need to contact Wolters Kluwer Health (the manufacturer of the NCLEX-RN 4000 Review program). The customer service number is 1-800-638-3030. Once you reach a customer service representative explain why you call and they will send you by e-mail an update that will allow the NCLEX-RN 4000 to run on the Windows 7 operating system. Please do not hesitate to ask if you have any questions! And thanks to all who have responded to this topic! I enjoyed all your comments!

• a610n - fan error of the system after replacing the motherboard

  Hi all

  I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

  As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

  Now, the case's fan then what really is the problem? Any ideas anyone?

  Thank you

  -Panos

  The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

  The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

  As for you, another question, the front USB port attaches to a USB connector on the card.

• Satellite L500 - Create System Image - errors on the media

  The Satellite L500 series, I tried 3 times to create an image of C: System with the help of Windows 7, but each time on checking image files created, I got the message "backup Windows found errors on the media while saving a top backup & can not be used for additional backups.

  I tried in Windows to restore from this DVD, but he acknowledged even the backup DVD Win.

  Discs used: Sony DVD - R 16 x, & twice on DVD + RW (4 x), used straight out of the box (no formatting by me).

  Any ideas what I am doing wrong, or if b some into conflict with programs that I use?

  In my opinion, this question is for Microsoft. As far as I know it is the functionality of Windows and the laptop manufacturer has not much to do with it.
  Can you create upward on the second partition of HARD drive or even on external HARD drive?

• Error 2: The system cannot find the specified file

  Failed to start the Windows Audio service on the local computer. Error 2: The system cannot find the specified file.

  Help, please
  Sam

  What version of Windows, including service pack (right click on my computer > properties)

  What past just before the problem arises?

  Click Start > run > services.msc > OK
  Scroll down to "Windows Audio"

  The Windows Audio service must be started and its "Startup type" should be "automatic".  If it is not started, double-click the entry and click on the Start button.  If it is unable to start the service or instead generates an error message, the file for the Audio Service may have become corrupt or deleted (although this file has to be protected by Windows File Protection).

  Search for your system (probably C :) drive
          
  audiosrv. DL (it's only one L)

  Make sure to look in the "system folders" "hidden files and folders," and "subfolders.

  You should find the audiosrv.dll (with two Ls) in C:\Windows\system32.

  If she is not there, it should be in C:\Windows\ServicePackFiles\i386

  If it's not there either, you have a file named audiosrv.dl_ in C:\i386?