a610n - fan error of the system after replacing the motherboard

Hi all

I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.

As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.

Now, the case's fan then what really is the problem? Any ideas anyone?

Thank you

-Panos

The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.

The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.

As for you, another question, the front USB port attaches to a USB connector on the card.

Tags: HP Desktops

Similar Questions

  • Install the operating system after replacing the corrupted hard drive Asus q500a

    The hard drive on my Asus Q500a is bad (he had checked the repairman). They told me that I could replace it (it will just keep failing until at last it dies just) but I have to re - install the operating system. The laptop comes with Windows 7 and I upgraded to 8 when it came out (I think). I don't have a recovery disk.

    How can I replace the corrupted hard drive and re-install the operating system?

    If I need to buy Windows 8, where can I find?

    Would it not easier that I left the repair shop handle it?

    Thank you in advance.

    Hi Kristi,

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    According to the description, I understand that the problem with you want to reinstall the operating system after replacing the hard drive corrupted on the system.

    Certainly, I understand your concern and will try my best to help you.

    I suggest you check the suggestions contained in the Microsoft link below and check if this is useful.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/replacing-hard-drive-and-re-installing-Windows-8/e8dbfc81-5294-4c94-9276-0f36e0a66e59

    In addition, you can see the suggestions in the link given below.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/reinstall-Windows-8-after-the-operating-sytem-has/30d47e63-296b-4466-ae9d-4628084541dc

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

    Jayant

  • After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

    After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :
    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:
    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

    You can always try phone activation:

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Error loading operating system after shutting down the computer because of the high operating temperature

    I decided to re - install Windows XP Pro x 86 on my wife's computer. So I went into the BIOS to make sure that the CD/DVD drive has been configured to start first, and then I inserted the DVD and then restarted the computer.

    Now, the XP disc started normally. I installed XP to the point where I deleted all previous partitions and then created a new. Windows then displays the warning that the computer would not be able to boot up to what XP finished installing. I guess that's because start-up files have been deleted when I deleted all previous partitions during the installation.

    Right after I clicked on enter the warning message, the computer shuts down. No! So, I try to re-boot, in the hope of all simply continue with installing XP, but instead, the computer will display a message indicating that the computer has been stopped because of the high operating temperature. I then go ahead and get a message saying: "Error loading operating system."

    No matter what I do, I can't go any further. I can't get into BIOS or anything. If I try the F10 key (or whatever the keys are), I get a beep. It does not properly respond to my entries.

    I don't think that the high temperature operation destroyed all components. The computer stopped several times in the past. Furthermore, it would not be part of integrated security if Microsoft enabled the computer reach a destructive temperature before stopping. I think that the problem occurred during installation was interrupted just after that previous partitions have been deleted.

    BT, I don't know what to do now. Loooking for suggestions.

    Hi Diadem1981,

    You can follow this link completely & check if the problem persists.

    Error message "Error loading operating system" when you restart your computer during installation


    Reference:
    How to install or upgrade to Windows XP

    Hope the helps of information.

    Please post back and we do know.

  • notice of fan Error at the beginning

    Hello

    I'm Indonesian, I have hp pavilion notebook pc g4 model g4-2308tx

    I have a problem with the internal fan, and if I turn on the laptop I get the notice on fan error (909)

    so, what can I do to solve the problem on the internal fan? Thanks before and just answer this

    Hello

    Try to update all the windows updates through the control panel & HP updates drivers & BIOS from the link, select your operating system - click Next - scroll down to update BIOS & drivers:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=100&cc=us&DLC=en&docName=bph07165&LC=en&product=5348564&query=G4-2308tx

    Is there a noise? You hear the cooling fan running?

    Keep the laptop cool with cooling pad.

    Test of hardware failure, make a vast & fast test drive & memory. Here is a link to help you: http://support.hp.com/us-en/document/c03467259

    If none of the troubleshooting work & if you get the error message of fan, you will have to go for replacement of it.

    Here's the Manualfor your product.

    The cooling fan HP part number is 680551-001 & while the heat sink assembly (includes the thermal material replacement) please refer to Page 22, 23, 81-83 of the manual after verifying your product specifications.

    Hope this helps,

  • Can I do a system restore after replacing a motherboard on my laptop?

    I just had my motherboard replaced on my Dell laptop. Just before that, I (unconsciously) to delete my user account 'dan' by changing my computer name and the domain, but not a not restart after the replacement of the motherboard. So, after installing the new motherboard, 'poof' no «dan» user profile I logged as administrator. All my User\dan data, including Outlook data is always available, but how do I get my dan user account without having to start over? That is to say. I can do a system restore to before the replacement motherboard without problem?

    Hi DannyRS,

    Because you are replacing hardware on your computer, you will need to reinstall the operating system. Make sure that you all have a complete backup of your important data before you make these changes.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Error loading operating system" after windows update

    I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

    Hi argyle_83,

    Were you able to boot into safe mode?

    This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

    Method 1: Obtain the latest BIOS updates

    WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

    Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

    Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

    Find information of BIOS on your Netbook from this link.
     

    Here are answers to some common questions on the basis of input/output system (BIOS).

    BIOS: Frequently asked questions

    Method 2: Run the Startup Repair

     

    Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

    Refer to this article for more details.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • After replacing my motherboard in my HP system, Windows will not be activated.

    Activating a computer you already enabled...

    I have a hp motherboard went blewy, when I reinstalled another motherboard with all the same stuff he told me that I had to activate windows, wouldn't let me open a session and can not get telephone service to make his case either, it's hp that came with it installed and worked upward until the MB went up in smoke... can you please help?

    Hello

    The system is HP, and very probably the OS is OEM. As the motherboard has been replaced the operating system sees this as a new system. You will need to buy a new copy of Windows or contact HP for the media.

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

    http://WWW8.HP.com/us/en/support-drivers.html

  • Error loading operating system after chkdsk

    Hello

    I'm not too familiar with VMware.  I did a chkdsk on the disks of a virtual computer, and now it says Error loading operating system.

    When I browse the data store, I don't see that 2 of the 35 and 209 GB vmdk files.  Server has 3 disks should have 3 files vmdk?

    Any suggestions on how to get my VM operational return.  I don't have a recent copy of Snap shot.

    Thank you!

    When I browse the data store, I don't see that 2 of the 35 and 209 GB vmdk files.  Server has 3 disks should have 3 files vmdk?

    There should be three files VMDK... somewhere. They are not needed must be in the same place or a data store. Use the vSphere Client to open the properties of the virtual machine, and then select the hard drive, and on the right under 'Disk file' it will show the data store and the path for the VMDK... for example ' \[somedatastore\] some/disk.vmdk.

    Any suggestions on how to get my VM operational return.  I don't have a recent copy of Snap shot.

    For Windows, you can try a repair of the OS installation.

    ---

    Kirk Kosinski

    VCP 4, MCITP: EA/GO/EDA7

  • Error on the motherboard

    I have a laptop HP Pavilion, Windows 7, 64 bit, i.e. 3 years I ran the System Diagnostics test recently - using HP Support Assistant.  I received that I have the following error:
    03/07/2015 Tuneup failed lists a number Code Memory Module.

    After that, I called where I bought the computer & they stated it was a battery on the motherboard.  My question to you have you ever heard of this?  I have a battery of power supply, but I believe that this is not what they tell us?  I would like your comments or suggestions.

    Darlene L. Ells

    @DarLElls,

    Hello and thanks for the display on the HP support forums.  What they are talking about is the CMOS battery.

    Please post back with the complete model and serial number of product and I you the link to the maintenance and care for your laptop computer guide.

    With this, you can get the good battery and see where it goes.  They are usually a standard size but.

    Computers how can laptops HP - I find my model number or product number?

    Please post when you have a chance.  Thanks again for posting and have a great day.

  • How can I fix Windows XP OEM after replacing my motherboard computers?

    Replaced mother on board, how can I do a repair (the Win XP OEM retail box) of Win XP installation?

    original title: how to install Win xp oem retail repair?

    You can try to boot from the installation CD and select the repair option.  License of the OEM version is however considered as not valid once you replace the motherboard, unless it is the same brand and model as the original, then I wish you good luck!

    I hope this helps.  Good luck.

  • HP Pavilion 17-e119wm: reinstall Windows 10 operating system after replacing the hard drive

    Hello, I bought a laptop HP Pavilion year last for work or school. He perfectly managed until yesterday when it was freezing to close unexpectedly. Waited about half an hour to see if it would work himself, I had several programs running at the same time. With no results, I did a hard shut down and left for about two hours. Trying to turn it back on, I was stuck on the HP Home screen for almost an hour. I turned off the and tried again. Sometimes I would be stuck on the startup screen, and sometimes he would show that he was about to auto repair, then the screen turns off. In addition, the recovery menu of the system through the F11 key did not work, so I did a Quick Test of system and received a short Drive DST hard failure.

    I plan to buy a replacement HGST 5 K 1000 1 TB hard Drive from the manufacturer; However, my warranty expired last month, and I'm not sure how to reinstall the OS (installed with Windows 8.1 then upgraded to Windows 10 factory), once the new hard drive in place.

    I've never done a HP system recovery Image, and I'm low on funds, so I'm not able to contact HP directly. Help, please. I am a student and I work from home, so I am at a loss without my system.

    If you want to reinstall Windows 10, then this is the part the more easy and free.  I understand, completed after the upgrade to Windows 10, then you can clean install Windows 10 site M$.

    On a work computer, go to the WINDOWS 10 DOWNLOAD, scroll down to the purple 'Download tool now 64 Bit' click that to let do its thing.  On the next screen, choose 'Create the installation media for another PC', then what kind of media you want to use DVD or USB flash.  Once created, install Windows 10 on the PC in question - when everything that fact it is activated.

  • Error - missing operating system after the upgrade to Windows XP Professional from Windows XP Home Edition.

    Original title: lack of an operating system.

    I have a Dell which had windows xp home installed on it I upgraded a while back to pro, the problem is the operating system that you are completely crushed and all I have is a cd to upgrade so it won't let me install because it said that missing operating systems... so what can I do that won't cost me a thing!

    Hi mistyblu976,

    This problem may occur if one or more of the following conditions are met:

    (a) basic input/output system (BIOS) does not detect the hard drive.

    (b) the hard disk is damaged.

    (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

    You can follow this link & check if it helps.

    "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

    Hope the helps of information. Please post back and we do know.
    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • replace the operating system after replacing death HD

    Pavilion dv7-4285.  I replace a hard disk totally dead! How can I get (free, cheap oe) replacement for operating system. I did not receive the disks of software of the retailer.

    Hello

    There are two options available.

    1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

    Order HP recovery disks.

    2 another option that you might consider is to create your own Windows 7 installation disc.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

    Windows 7 Home Premium 64 bit SP1.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are here.

    Kind regards

    DP - K

  • After replacing my motherboard, I get an error message that my upgrade from Windows is already in use. How can I fix it?

    You will need to upgrade my new hardware after motherboard failure - product message already in use.

    I have upgraded xp to vista home top about two years ago.  My motherboard is dead.  I used my upgrade disk to upgrade my hardware replacement.  He tells me now my upgrade is already used, but that the material is now dead.  How to use my update (XP to Vista home top) without paying again?

    http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media

Maybe you are looking for

  • Toshiba still WT8 - B do not touch entered task

    HY,I'm doing a clean install on my another 2 at the moment, the operating system is installed, but the touchpad do not work and if I go to the file Explorer, I see that only 24 32 GB are free, it's because I installed the system on the extended parti

  • Test equipment 4SNS/1/40000000 error code: TA0P - 38.875

    Someone who knows: Hardware Test 4SNS/1/40000000 error Code: TA0P - 38.875?

  • Cyan fails from one page to another on Officejet Pro K8600

    I have an Officejet Pro K8600, installed on XP. A nearly full cyan stopped working in the middle of printing from one page to the other - tried all the patches.  No msg error - says all cartridges are full. Buy HP new cartridge, always did the same t

  • On laptop, tilde key (~') does not open the game console

    I have this laptop (http://www.cnet.com.au/samsung-series-9-13-inch-2012-339341806.htm) running windows 7 Home premium. Games that does not work in the console include Far Cry and Far Cry 2 (steam), Fallout New Vegas. I tried setting the launch for t

  • configuration of point-to-multipoint 1532

    Hi guys,. you want to know how to set up the 1532e AP of to a point to mulitpoint. We do not have a controller and use them as stand-alone. Should what configurations I do on the AP and contactors interfaces? Can someone take step by step, through GU