Error in the Simulator

Similar Questions

• Error starting the Simulator

  Hello

  When I run the Simulator, on the screen, it is showing the following error

  "[SOUTH error: cannot verify the package id is not valid, Missing].

  Help, please.

  This seems to be the same problem as this thread:

  http://supportforums.BlackBerry.com/T5/native-development/BlackBerry-10-Simulator-not-showing-up-in-...

• Fix API error in the Simulator

  Hello

  I get error Secure API in my Simulator OS 6.0 torch.

  How can I remove it from my Simulator?

  I have my keys secure but who are on another machine and I can't access it from this machine.

  My other app works fine on 9000 OS 5.0 without code signing Simulator.

  Thank you

  Afonso Tyagi

  Check that the safety of the appliance is turned off.

  Configurations of debugging-> General-> peripheral Security Enable in Eclipse.

• How to display the javascript error in the Simulator?

  Hi, I have experience several problem in developing countries using webwork.

  I use Blackberry webwork in plugin eclipse to develop the program, my Simulator is 9800 6.0.0.337.

  I have the problem when I try to load his PIN and file reading / writing.

  var pin = blackberry.identity.PIN;

  The example of read/write file I copied directly from the code sample download in Blackberry.com.

  Two of them does not work. I want to use try {} catch (err) {} to warn of the error, but this return "undefined" for me.

  Is this something that I forget to install?

  Sorry cannot any more help because I think that most of these functions does not work on the playbook Simulator

  (in your case test you on smartphone where I would expect most APIs to work..)

  Last try if...

  Check the following line in your code example:

  var blob = blackberry.utils.stringToBlob(filecache);
  

  who do not:

  var blob = blackberry.utils.stringToBlob(textarea);
  

  ?

  Kind regards

  H.

  PS: regarding the playbook Simulator the following are suspect - i.e., don't think they work:

  blackberry.utils.stringToBlob (somestring)
  blackberry.utils.documentToBlob (somedoc)

  blackberry.identity.getDefaultService)
  blackberry.identity.PIN
  blackberry.identity.IMSI
  blackberry.identity.IMEI

  Among others...

• Error in the simulation: not enough nodes found

  Hello I'm trying to simulate a ckt simple active filter using MAX9618. However, I get the error message as not enough knots in my schema I join the scheme of reference.

  Can someone please help me understand why I get this error?

  If I remove U2B component on the schematic, I observed that I don't get the error mentioned above?

  I'm a complete newbie to multisim.

  Hello

  The way in which you created the op-amp section B is probably the problem. The model has 5 nodes while your symbol of section B has only 3 terminals.  Refer to the following tutorial to learn how to create several section with different symbols:

  http://www.NI.com/Tutorial/14438/en/

• Error to the element of the queue with simulated signal, but not with the DAQ hardware

  Hello.  I get an error code 1 when I run my VI in simulation mode, which is only 3 simulate subvis signal at different frequencies.  The block diagram shows jpg file and the probe is after I stop the VI.  Note that there is an invalid refnum.  I don't know why that is.  I am also including the watch of the probe after a few iterations, there is no error on the probe 64 until I stop the VI, and also noted that there have been no queue items.  This of course means that I don't get to remove the data in loop 2.  An interesting note is that the system works fine when I run the program in data acquisition mode, which is the other case behind the 'simulate signals. "  In this case, the only thing is the DAQ assistant and dynamic data of the tunnel cable.  Everyone can't see what I could do wrong?  Thank you.

  Thanks for looking at my post.  I thought about it about five minutes ago.  I didn't have a timeout on the handeler event, so it was not double check for new items in the queue.  I don't know yet why the probe shows showes that items have not put in the queue because they certainly were.  Maybe "queue items 0" means that there are no items saved in the queue. ?

  Your concern is interesting and deserves a check...  I just ran it without registration, and it seems that the release of the case (the default) record structure is just an empty DDT, a placeholder, I guess.

• Error when, with audio streaming via HTTP to the Simulator

  I use JDE 4.7 and 8900 Simulator.  I'm trying to listen to an MP3 via http to a blackberry app.  When you use the BufferedPlayBack example screen, I get the following error when the data source is trying to open the connection - "net.rim.device.cldc.io.dns.DNSException: error trying to solve.

  When I enter the same URL in the BlackBerry browser on the Simulator, I get the following error: "the selected server returned an error when you try to respond to your request.

  When I enter the same URL in my web browser in my PC, I am able to stream audio and play with QuickTime.

  Why I get this DNSException on the BB and not on my local PC?  The web engine runs also locally.  I know that the BB Simulator does not support rstp.  The Simulator also not does support streaming over http?

  This is the URL I used:

  http://myLocalMachine:8080/myMusic/anAudio.MP3;deviceside=true

  Thanks in advance!

  T

  I found a solution to the question in the thread below.  I increased the connection. MaxNumberOfKBytesToSend = 10240 in the... File MDS\config\rimpublic. Property and so was able to sucessfully stream mp3 to my request.

  http://supportforums.BlackBerry.com/T5/Java-development/increase-MDS-CS-limit-on-http-download-size/...

• App works perfectly well on the Simulator (using all modes) and peripheral when z10 in the communiqué of the execution and debug mode. But creates a 'SIGSEGV = 1 fltno = 11 ip = 781722ec error code' when the term is used.

  My application switches between two documents qml is a home page, and the other is actually a video player. Whenever I press the button to go to the video page, it crashes on my z10 and generates the error «terminated code SIGSEGV = 1 fltno = 11 781722ec = ip...» ". But on the Simulator, it works (without of course plays video). When I use the race version and the debug mode, it works perfectly on my z10.

  This problem occurs frequently when I add a new code element. First of all, it happened when I added a scrollview and container, and it's happening now again when a defined a struct in the header file.  It would be nice to ignore this problem? or y at - it some deeper underlying problem which is the cause

  Just tried, I received the SIGSEGV error too, it looks like parent to AbstractPane fixed it.

  void ApplicationUI::changeScene(const QString& newQmlFileName) {
      // Create root object for the UI
      QmlDocument *qml = QmlDocument::create("asset:///" + newQmlFileName).parent(this);
      qml->setContextProperty("_app", this);
      AbstractPane *root = qml->createRootObject();
      root->setParent(this);
  
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  My test project is also attached to this message.

• Discover the error of work when you try to run on the Simulator

  I get an error when I try to run my application of Flash Builder for the Simulator:

  An internal error occurred during: "Discover job."

  1

  I ping the Simulator without problem.
  I was at this for hours. Here is my configuration:

  -Flash Builder 4.5.1

  -Flex SDK 4.6.0
  -BlackBerryTabletSDK Air 2.0

  -BlackBerryPlayBookSimulator 2.0

  -VMWare Player 4.0.2

  -on Win 7 Pro 64-bit

  Any ideas?

  I have:

  -Upgrade Flash Builder to 4.6 (which took forever)
  -Re-installed Air BlackBerryTabletSDK 2.0 and integrated with FB 4.6

  Seems to work now.

• Temporary server on BBM on the Simulator error

  Hi, I want to test some features BBM on Simulator as "Invited PIN" and "invited to download", my problem is when I open the app the sumulator BBM I get "Unable to complete installation", "temporary server error" and only the button exit

  Notes:

  1. I did all the steps in the README.txt that is on BBM dirctory, but the problem persists

  2. when I open the Simulator BBM I get these BBM Server console output

  <2013-03-19 14:14:37.194 GMT+02:00>:[97]:::
  <2013-03-19 14:14:37.194 GMT+02:00>:[96]:::
  <2013-03-19 14:14:37.194 GMT+02:00>:[98]:::
  <2013-03-19 14:14:37.204 GMT+02:00>:[99]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[101]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[100]:::
  <2013-03-19 14:14:37.392 GMT+02:00>:[102]:::
  <2013-03-19 14:14:37.405 GMT+02:00>:[103]:::
  <2013-03-19 14:14:37.425 GMT+02:00>:[104]:::
  <2013-03-19 14:14:37.425 GMT+02:00>:[105]:::
  <2013-03-19 14:14:37.427 GMT+02:00>:[106]:::
  <2013-03-19 14:14:37.429 GMT+02:00>:[107]:::
  <2013-03-19 14:14:37.430 GMT+02:00>:[108]:::
  <2013-03-19 14:14:37.433 GMT+02:00>:[109]:::
  <2013-03-19 14:14:37.435 GMT+02:00>:[110]:::
  <2013-03-19 14:14:37.546 GMT+02:00>:[111]:::
  

  Please help me

  Thank you very much

  It seems that you have the Java Cryptography Extension incorrect files.  Note that the PVE files are different for Java 6 and 7.  Make sure that you have copied the correct files for your current location of Java.

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• Cannot install the conflict file travel.dll error in Flight Simulator

  I installed FS 2004 on my laptop (8.1 64-bit Windows). When I try to run it that a message appears saying it cannot load to a conflict with the travel.dll file. I found the file, but I have been unable to remove it. I tried to change ownership, but I wasn't able to recover the privileges of deletion. Is there a way to get around this conflict of file during the game, loading process?

  Hello

  What is the accurate and complete error you get when you try to delete the file travel.dll?

  If you get access denied when you try to delete the file.

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670/en-us

  Alternatively, you can try to install the Flight Simulator in clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Post us the results after trying the steps above.

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Error 1335 the Cabinet file

  Hello

  When I install Microsoft Flight Simulator X, I get the error message 1603. But before I got this messase that I get an Error 1335 the Cabinet File "D1 ~ 10.CAB '.

  I copied all files from drive 1 and 2 on my hard drive and I still get the same message.

  Help, please

  Hello

  Cabinet (or CAB) is a file format to archive for Microsoft Windows that supports compression without loss of data and embedded digital certificates used to maintain the integrity of the archive. CAB files have .cab file name extensions.

  Install the game in the clean boot and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.

• Cannot install the Simulator in Windows 10

  Try to install the Simulator on 10 (64-bit) Windows, get the error:

  "Windows error 2 occurred during the loading of the Java virtual machine"

  I installed the latest Java from java.com (1.8.0_73)

  Any ideas?

  Found a solution on stackoverflow

  You need to run the installer through the command line with the following options:

  blackberry10simulator - install .exe LAX_VM -i GUI

  that is, to define the full path to the runtime java.exe
  The '-j' have GUI "parameter was also necessary

  BlackBerry ceased to test such things?