error "inconsistent data" on the DVD CS5 Installer

Similar Questions

• Error at startup, "an error has occurred in the program during installation... ox80070002.

  Original title: Constanr Error Message at startup.

  When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?

  Open log on to Windows as administrator or an account with administrator rights.
  Click Start | All programs | Accessories | System Tools, and then click System Restore.

  Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)

  may already be selected), then click Next.
  In her select a Restore Point window, use the calendar to select a date before the day of the change or problem o

  Next.
  Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
  In the page confirm the Restore Point selection, click Next.
  System Restore will now restore Windows XP configuration, and then restart the computer.

  Finally log on to the computer (using the same Admin account).
  The system restore restoration complete 'window' is displayed.
  Click OK.

  Your fact restore the PC to the point in time, you have selected.

  J W Stuart: http://www.pagestart.com

• I can I burn a slideshow of my office on a RW dvd that already has data on it?  I want to erase the old data in the dvd

  I can I burn a slideshow of my office on a dvd + RW that already has data on it?  I want to erase the old data on the dvd and replace it with new content.

  Try to read the manual of your DVD - has nothing to do with iPHoto for Mac.

  LN

• I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

  I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

  * original title - I need fast help please *.

  How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

  "Windows 7 backup XP restore"

  If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

  HTH,
  JW

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

• Error: "Setup cannot copy the NTLDR file" installation of SP3

  original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.

  Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
  Everything is going very well until a "Copy error" window saying:
  "Setup cannot copy the file ntldr.
  It gives 3 options
  1: "Retry" (does not work)
  2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
  3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
  Any suggestions?
  Thank you

  PS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
  No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".

  Information on the machine:

  Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
  Language: English

  System manufacturer: Dell Computer Corporation
  System model: OptiPlex gx270s
  BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
  Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
  Memory: 1022MB RAM
  FG 0, 015 M/b: Dell Computer Corp.
  Chipset: Intel i865PE
  NorthBridge: Intel i865PE
  SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
  HARD drive: Maxtor 6E040L0
  AGP: ATI Radeon HD 2400 Series

  You can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.

  Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• Satellite L750-11W - cannot write data to the DVD-ROM drive

  I have the laptop for about 2 years
  I have never used dvd - ram to write only for playback
  Early on, I noticed there was some lag before you begin to hear the sound of the DVD-ram, but it don't think it was a question

  Today, I tried to write files to a dvd. I inserted the blank dvd and waited and waited nothing happened.
  I tried to access the dvd - ram but nothing. I checked the game automatic and chosen options always ask. Re-inserted the blank dvd and waited a few minutes, then the Autoplay menu appears. I selected the option to burn with windows software, selected files, pressed burn, whereas it was over. Reinsert the dvd and guess what... it was empty. None of the files have been written on the DVD.

  I watched the dvd (in the back) clearly nothing has been written.
  I installed nero, and first of all, I checked the write speed.
  Well in the specifications, he says that this dvd - ram must write with 8 x.
  Nero told me that she could write with only 4 x. Then I tried to write the files with Nero.

  Waited for 10 minutes (time estimated by nero) and the dvd was ejected and nero says writing has failed at 4 x.
  I looked on the dvd. There were some marks, but the dvd should have been full.

  In any case the dvd was wrecked... visited the site Web of Toshiba and creator of disc uploaded... Installed... reboot the laptop... start disk creator of... Well what a shock I kept getting the same error:

  An unexpected error has occurred.
  Error code: 320097-49-00000001
  Press ok

  100 times the error persists until the program starts and he tells me that there are no recordable disks attached. Now, I'm really disappointed.
  What can I do?

  OS: Win 7 ultimate x 64
  the dvd - ram works correctly (via Device Manager)

  Why you n t try an other DVD like DVD R discs
  I had the same experience as you. Some discs are good, some are not so good.
  There are different manufacturers providing different types of discs with different quality standards.

  I tested a lot of drive but from the best experience with DVD R TDK or Verbatim

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Forbidden/403 error when you access the OIF after installation

  Hello
  
  I just installed OID + OVD + OIF on a Windows 2003 server. The Oracle database is on a separate machine.
  
  For the installation of the OID + OVD + OIF, I installed WebLogic 10.3.3, then ran the installer OID + OVD + OIF and was able to do successfully.
  
  I then rebooted (seems to be necessary), then ran startNodemanager.cmd and can access the Console of WL and seen the servers 'wls_ods1' and 'wls_oif1 '.
  
  I have two of these servers has started successfully.
  
  When I go to http:// < host >: 7005/dohad, I have the console of the ODS.
  
  But, when I go to http:// < host >: 7499/fed, I get an error 403/forbidden.
  
  I checked the Adminserver log file and the wls_oif1 log file, and there are no errors. In addition, the log file of access for the wls_oif1 server shows no access.
  
  Is there an extra step that I have to do to enable the server of the OIF?
  
  Thank you
  Jim

  You are using an incorrect URL. Please use this:

  http://: 7499/fed/PDI/initiatesso

  and / or

  http://: 7499/fed/sp/initiatesso

  If you want to administer the OIF, you can use the MS enterprise manager. Using the em, you can start the OIF and use the url above.

  http://: 7001/em
  http://: 7001/em

  Port 7001 is the default value; If you thing hv selected during installation, then use this port. The login is (by default) weblogic and password, this is what you gave when installing.

  I hope this helps. Let us know.

  Published by: AmbarishMitra on April 11, 2011 10:33

• How to find the Date and the time of Installation of Oracle on Windows?

  Hello
  
  Is it possible to find the installation Date and time of Oracle on Windows?
  
  
  Concerning
  Rajesh

  If you have never recreated/restored/reincarnated the database, then COLUMN of v database $ should tell you when you created the database.

  If you are looking for the time of installing Oracle home, check the logs under OraInventory.

  Reply by Satish sir at the following link:
  installation of a database date/time!

  HTH
  Girish Sharma

• How do you get the data of the DVD running on other computers?

  Hello world! This is my first time and I really hope that someone can help out me.

  I want to make a DVD with JPEG files and WMA using my Toshiba Qosmio G20. However, whenever I try to do the DVD I end up with does not work on my desktop!

  I think it may have something to do with formatting (the laptop gives the DLA DVD).

  Does anyone have advice? I have already destroyed some DVD - RW.

  Any help will be really appreciated. Thank you!

  Hello

  What burning software did you use?
  I use a burning software Nero and it works perfectly. I m very satisfied.
  But have you tested the DVD burned on your Toshiba laptop?
  It work correctly?

  Good bye

• Error inserting data into the database of JSF

  Hi all
  
  I have a form and a button of validation. I created the form using the editable view object created on an entity object. When the student has table (base table of data in which I have to enter data) was empty, I managed to insert the data into the table.when I run the same second time application it shows data that I entered previously. But iam able to modify this data and insert the new record again. What should I do so that it does not show the data I already inserted previously when I run again. I think that iam missing something. Please suggest.
  
  Thank you.

  Here are two ways to achieve the same thing:

  -If you use taskflows, you can add createInsert action as activity by default and then have a navigation from this at the registration page so that the creation form will be shown on the loading of the page. As a result, you can directly enter and validate.
  -If not, have binding action createInsert in your pagedef and add an executable invokeAction for the same thing with prepareModel so that the registration form empty appears when loading the page

  Jean Lou

• Menu error when turn off the DVD (CS4)

  Hello Adobe community

  I recently created a DVD in Adobe Encore CS4. It has two menus. The menu title has two buttons: Play driver (which connects to a minute 25 TV pilot) and Extras (which connects to a root menu). The menu root contains three music videos (which all the link to the main menu) and a main menu button (which has links from the menu title). I burned the Encore DVD and it played on my DVD player at home. Everything on the DVD works great (menus and videos). However, when I am on the title menu, and I turned off the DVD drive and turn it back on (with the disk still inside) something strange is happening. The menu suddenly compressed horizontally, and the buttons no longer work. Play, up, down, enter, none of the remote controls work more. The only way I can get the DVD works again is to insert a DVD completely different summer and then insert again my DVD. Then he is back to normal.

  I included two photos to illustrate what is happening.

  The DVD is in 16:9 mode, however the TV I watch on 4:3.

  IT IS WHAT THE MENU TITLE LOOKS LIKE WHEN I INSERT FIRST THE DVD: ALL THE WORK OF BUTTONS/LINKS/NAVIGATION... EVERYTHING IS GOOD.

  

  WHEN YOU TURN ON THE DVD MARKET AGAIN (AT THIS POINT), THE MENU BECOMES SQUASHED HORIZONTALLY. DISAPPEARS FROM THE BOXING OF THE LETTER UP AND DOWN, AND NOW NONE OF THE BUTTONS.

  

  Interestingly, when I go to the menu root (by clicking the Options button) and turn on the DVD player and turn on, the main menu is not affected, and all the buttons still work. The menu root is almost identical in design in the menu title, because it has exactly the same video in the background and audio playback on top. However, this problem occurs only in the menu title. Also, if I turn the DVD player working again while in the middle of watching one of the videos on the DVD, it still works very well. This problem occurs only in the menu title.

  The video in the menu title (and the menu root) is linked dynamically to Premiere CS4.

  Here is a picture of the organizational structure of the dvd:

  

  Parameters:

  PROJECT SETTINGS:

  Design mode: DVD

  TV standard: PAL

  Dimensions: 720 x 576

  Fields: Bottom field first

  Codec: MPEG-2

  Frame rate: 25

  Automatic transcoding: MAximum Audio/Video bitrate: 7,0 MB/s

  Audio transcoding scheme: Dolby Digital

  MENU SETTINGS:

  Base:

  End action: the title menu

  Replacement: Undefined

  Default button: 1

  Offset: 0

  Color scheme: automatic

  Automatically route buttons (checked)

  Operations: All authorized

  Aspect Ratio: 16:9

  Motion:

  Video: background (linked dynamically to Premiere CS4) video

  Audio: mp3 file

  Duration: 21:17 (seconds)

  Animated buttons (checked)

  Point of loop: 00:00:00:00

  # Loop: forever

  The DVD player is a Tevion AC-DVD51 (Jpeg/Mpeg4 Player)

  I have not included specifications on individual video files on the DVD, because they all work perfectly. It's just the menu title that plays up.

  If you want to get the list of additional parameters. Let me know.

  I really want to solve this problem, because I will be the sale of the DVD and I don't want this glitch happening on something, people have paid for.

  Thanks a lot for your time!

  -Robert

  Try your dvd on another dvd player.

• Error "insufficient data for the image.

  Can someone tell me which version of Adobe Reader, I need prevent this error and how to download it. I work for a charity that sends electronic receipts in pdf format and some of our voters can not open them. I heard that there is a bug that has been fixed and downloaded the latest version but still get this message.

  Hello Tara Morley

  Please visit the below links

  TER-updating-to-10-1-4-or-9-5-2/ http://blogs.adobe.com/dmcmahon/2012/08/21/Acrobat-insufficient-Data-for-an-image-error-AF

  http://helpx.Adobe.com/Acrobat/KB/insufficient-data-image.html

  ~ Deepak