Error: Invalid Configuration for the JMS adapter

Similar Questions

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• Invalid configuration for the device '0'

  Since the upgrade to view 5.3 I get these errors and it's starting to drive me batty.  I have a fairly simple environment (1 security server, 1 connection to the server, standalone composer, standard vSwitches).

  Error messages:

  

  Here is what I did to solve problems:

  • I had a problem with having two composers in the environment at the same time (mainly because my coinstalled uninstalling did not actually uninstall as it was supposed to), but that seems now fixed.
  • Initially, I thought it was a problem with my model/snapshot, so I created a clone of my shot and used to create a new pool, still errors.
  • I created a new virtual machine Windows 8.1 and allows to create a new pool, yet of errors.
  • I deleted all pools and created new ones with my current Windows 7 and new VM Windows 8.1, still errors.
  • I tried a number of patches that I found via Google, but they do not seem to match exactly if the only one that I really was remove and add a new vNIC, yet of errors

  Which is really weird, is that desktop computers everything works as expected, I have just these annoying messages fills my vCenter logs so I would get cleaned up.  Has anyone seen cela or have any suggestions on what I can try?

  Mike Pagan

  What is the size of the VRAM on the pool?  I saw this when it is set to a size larger than 128 MB.

  Tony

• Error loading configuration in the repository data

  Hi all.
  I installed Oracle 11 g R2 on Windows 2008 Server.
  After that, I can't download the agent for a database.
  Any comments please.
  Thank you for your comments advense.
  Here is the Log file:
  
  .......
  ......
  ....
  .....
  March 9, 2011 14:19:46 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Discover sql user: declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  March 9, 2011 14:19:46 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:46 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Begin execution: CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Output value 0
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Running CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD completed successfully
  March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
  CONFIG: Arguments passed D:\app\DBAdministrator\product\11.2.0\dbhome_1 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
  
  Connect to the database using string (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) D:\app\DBAdministrator\product\11.2.0\dbhome_1 House with the role of 'SYS' user 'SYSDBA '.
  connected to the database.
  To run SQL declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
  noOfParams to bind: 1.
  run SQL.
  
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
  CONFIG: Account unlocked mgmt_view
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig invoke
  CONFIG: Managed to unlock mgmt_view account
  March 9, 2011 14:19:49 oracle.sysman.emcp.ParamsManager getParam
  CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
  March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  INFO: Download of the configuration in the repository of EM data (this may take a while)...
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
  CONFIG: Error loading configuration in the repository data
  oracle.sysman.emdrep.config.ConfigurationException: FATAL Exceptions of Configuration
  
  at oracle.sysman.emdrep.config.EMSchemaConfiguration.perform(EMSchemaConfiguration.java:232)
  at oracle.sysman.emcp.EMReposConfig.uploadConfigDataToRepository(EMReposConfig.java:699)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:385)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  NEWS: Check the log to D:\app\DBAdministrator\cfgtoollogs\emca\finaoradb\emca_repos_config_ file < date > .log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
  SEVERE: Error download configuration in the repository data
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  SEVERE: Error download configuration in the repository data
  See the log file at D:\app\DBAdministrator\cfgtoollogs\dbca\finaoradb\emConfig.log for more details.
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
  CONFIG: Stack Trace:
  oracle.sysman.emcp.exception.EMConfigException: error loading configuration in the repository data
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:397)
  at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
  at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
  at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
  at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
  at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
  at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
  at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
  to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
  at java.lang.Thread.run(Thread.java:595)
  March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig restoreOuiLoc
  CONFIG: Restoration of oracle.installer.oui_loc to D:\app\DBAdministrator\product\11.2.0\dbhome_1\oui

  PL see MOS Doc 1233913.1 ("error downloading Configuration for the data repository" when you configure dbconsole) for the solution

  HTH
  Srini

• Adding new SCSI controller: "error string: invalid operation for the '0' device.»

  Hello

  I have a problem when I try to add a SCSI controller to a virtual machine.

  I have this error:

  Error string: invalid operation for the device '0'.

  Lack of details: InvalidDeviceOperation

  Here is my code:

  my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

  my $controller = VirtualLsiLogicController-> new)

  deviceInfo = > $info,

  scsiCtlrUnitNumber = > '7'.

  sharedBus = > VirtualSCSISharing-> new ('noSharing'),

  busNumber = >-1,

  key = >-1,

  backup = > $backing_info,

  controllerKey = > 100,

  );

  My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

  device = > $controller,

  fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

  );

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

  {eval

  $vm_view-> ReconfigVM (spec = > $vmspec);

  Util::trace (0, "Controller has been created. \n") ;

  };

  I don't know how to handle, or even how to solve problems.

  Any ideas would be greatly appreciated.

  Kind regards

  Jeremy

  I finally found a solution.

  It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

  Here's the code used:

  My = $controller_spec

  VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

  device-online [0],

  busNumber => $scsi_controller.

  sharedBus => VirtualSCSISharing-> new ('noSharing')),

  operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

  {eval

  $vm_view-> ReconfigVM (spec-online $vmspec);

  };

• ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  I cloned database of MRC. (test for role transitions) and set up DR.

  I tried to set up with no default port.

  When I'm bouncing of the db, (stop and start), cannot connect to the db.

  SQL > startup nomount;

  ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_STBYCRMS."

  > > tnsnames.ora

  LISTENER_STBYCRMS

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  STBY_CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = stbycrms)

  (UR = A)

  )

  )

  LISTENER_CRMS =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  CRMSDB =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1698))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = GCD)

  (UR = A)

  )

  )

  ~

  > > listener.ora

  LISTENER11G =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT = 1898))

  )

  SID_LIST_LISTENER11G =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = stbycrms)

  )

  )

  ADR_BASE_LISTENER11G = / u01/app/oracle

  * I have an entry to the file for local_listener pfile.

  * .db_name = "CRM".

  db_unique_name = stbycrms

  LOCAL_LISTENER = "LISTENER_STBYCRMS."

  Thank you

  Hello

  LISTENER_STBYCRMS (ADDRESS = (PROTOCOL = TCP) (HOST = XXXX)(PORT= 1898))

  Is the above entry is correct according to the syntax?

  where give you "="?

  LISTENER_STBYCRMS = (Description = (Address = (Protocol = TCP (port = 1898))(Host=Neptune)))

  or

  LISTENER_STBYCRMS =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = XXXx)(PORT = 1898))

  )

  )

  -Pavan Kumar N

• I'm trying to timestamp (RFC 3161) a pdf file using my own timestamp server equipment but still get an error: 'invalid certificate for use.

  I'm trying to timestamp (RFC 3161) a pdf file using my own timestamp server equipment but still get an error: 'Invalid certificate for use' (text Original - certificado valido para uso e nao pt_BR:O). How can I get more information on what I'm missing or whats wrong with the certificate?

  I found the answer to my problem: it was linked to the plug of the TSA and its attribute 'Extended Key use '.

  In any case, thanks for your help. Just to answer the questions:

  Version: Adobe Reader XI

  Tried both:

  (A) the time stamp for the signature: signature put under without timestamp and an alert

  (B) the document timestamp: no changes and an alert

• ORA-19030: invalid method for the schema not based XML Documents

  Hi everyone can u help me please when I am trying to execute query below his throw errror

  DECLARE

  doc xmltype.

  BEGIN

  SELECT

  XMLAGG (XMLElement ("employee",

  XMLAttributes)

                    ' http://www.Oracle.com/emp_simple.xsd ' AS 'xmlns',

                    ' http://www.w3.org/2001/XMLSchema-instance ' AS ' xmlns: xsi ",

                    ' http://www.Oracle.com/emp_simple.xsd

  http://www.oracle.com/emp_simple.xsd'

  AS "xsi: schemaLocation").

  XMLForest (e.employee_id LIKE "EmployeeId",

  Select AS "name."

  e.job_id AS "Job."

  e.manager_id "MANAGER."

  e.hire_date AS "Hire Date"

  e.Salary AS "wages."

  e.commission_pct AS 'The Commission',

  XMLForest)

  d.department_id AS "DeptNo."

  d.department_name AS "DeptName",.

  d.location_id AS 'Place') AS 'Dept')))

  in the doc

  E employees, departments d

  WHERE e.department_id = d.department_id;

  doc.schemaValidate ();

  END;

  /

  The error I get is following

  ORA-19030: invalid method for the schema not based XML Documents

  Yes, Odie meant something like that.

  See how the employee node can now occur more than once in the employees node.

• DEU-00014: invalid value for the setting, "include".

  Hi, I need to do an export of paintings from a schema and a particular query executed will apply to all the specified tables in "INCLUDE = TABLE: '('TBL1', 'TBL2') IN' in the command expdp.»
  
  Now, I get the question in this setting INCLUDE. I have about 200 paintings to be included and I add this parameter INCLUDE in a separate parameter with all table names 200 file in Informatics and with the help of this parameter file in the expdp command.
  
  Error message I get:
  DEU-00014: invalid value for the setting, "include".
  
  When I use the same process for 2 tables, this works very well. I think that there is a limit to the number of characters that can be used in the INCLUDE parameter. If so, then how do I use expdp to select only those 200 tables of 500 paintings in my diagram. I'd appreciate any help on this. Thank you.

  Hello

  I'm sure that the limit is 4000 characters, but there are fairly simple workaround.

  Create the table my_tabs (a varchar2 (30));
  insert into my_tabs values ('your_table_name');
  Repeat this step for each of your 200 tables

  include = TABLE: "in ((SELECT from MY_TABS)) '"

  You may need to mess you with the quote, but the value you were using is just an expression. It is only by using a different expression.

  Dean

• UDI-00014: invalid value for the parameter, "remap_tablespace".

  Hi all
  
  Windows 2003 Server
  Oracle 10g
  
  I'm doing a reorg, so I droped and recreated the schema. No w I want to import my datapump schema export, but it gives me an error:
  UDI-00014: invalid value for the parameter, "remap_tablespace".
  
  Here is my script:
  Impdp patterns of name of user and password = siebel directory = dpdir dumpfile = logfile schema_exp.dmp = schema_imp.log remap_tablespace = SBL_DATA:SBL_DATA, SBL_INDEX:SBL_INDEX State 60
  
  What I'm doing wrong, it makes me crazy, please help
  
  Published by: user11211037 on December 6, 2009 00:54

  Syntax and Description

  SCHEMAS = schema_name [,...]

  If you have the IMP_FULL_DATABASE role, you can use this parameter to perform a schema mode import by specifying one single schema other than your own or a list of schemas to import. First, schemas were created (if they do not already exist), including the system and the role of subsidies, the history of password and so on. Then all the objects contained in the imported patterns. Unprivileged users can only specify their own schemas. In this case, no information about the schema definition is imported, only the objects it contains.

  Hope you are clear.

  Concerning
  Asif Kabir

  -Mark your answer as correct/useful.

• ORA-01839: invalid date for the specified month

  Hello
  
  I don't know if this is the right place for posting this... but I got the following errors in my alert log file (10.2.0.1)
  
  Errors in the fichier.../bdump/xxx_j000_23928.trc
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  in the trace file:
  NAME OF THE ACTION: (AUTO_SPACE_ADVISORY_JOB) 2009-03-30 22:00:02.313
  NAME OF THE MODULE: (DBMS_SCHEDULER) 2009-03-30 22:00:02.313
  SERVICE NAME: (SYS$ USERS) 2009-03-30 22:00:02.313
  ID OF THE SESSION: (194,87) 2009-03-30 22:00:02.313
  2009-03-30 22:00:02.313
  ORA-12012: error on auto work 8888
  ORA-01839: invalid date for the specified month
  
  The problem is the date is not valid for the specified month, my question is how do I solve this problem. This is a newly created database.
  
  I have only 2 jobs (some from dba_jobs) and there is no 8888.
  
  2 jobs I have are:
  
  THE WORK INTERVAL WHICH
  1 + 1/240 sysdate unlock;
  trunc (sysdate) 2 + 7 + 3/24 dbms_stats.gather_schema_stats ('db_name');
  
  
  Please help. Thank you.
  
  Published by: user10427867 on March 31, 2009 12:00

  The work is probably assigned a group of windows, probably MAINTENANCE_WINDOW_GROUP. The task will run in this window. Try these queries.

  select schedule_name
  from dba_scheduler_jobs
  where job_name = 'AUTO_SPACE_ADVISOR_JOB';
  
  select next_start_date
  from dba_scheduler_window_groups
  where window_group_name = 'MAINTENANCE_WINDOW_GROUP';  -- or the value returned by the first query if different
  

  Since it is a work of Oracle supplied, I recommend you contact Oracle support. The trace file contains other useful information?

• Thunderbird 38.3.0: No writable calendars are configured for the invitations with the provider for Google Calendar 1.0.4

  Hello

  I searched many hours today in the internet and your forums, but it seems that this problem is not solved yet:

  No writable calendars are configured for the invitations with the provider for Google Calendar.

  My Thunderbird is 38.3.0 and the provider for Google Calendar 1.0.4.

  I put calendar.google.enableEmailInvitations; true but it did not help. I also tried [email protected]... @googlemail.com. Calendar works fine, it syncs, I see all the entries etc. But I can't accept invitations even IF she must have write access.

  What can I do? Is there a solution for this?

  Thank you!
  Daniel

  Use CalDAV here to access Google Calendar via lightning. I have no experience with the add-on of the provider.
  In any case, it is my understanding that you must assign an e-mail address to a calendar in order to be able to accept the invitations for this calendar. I see that in your screenshot.
  You can try to remove the Google calendar in lightning and re-create it. Given that all the data is on the server nothing will get lost.
  Or you may want to try CalDAV.
  https://blog.Mozilla.org/calendar/2013/09/Google-is-changing-the-location-URL-of-their-CalDAV-calendars/

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Windows XP keep getting an error code 0xD59 for the Service Pack to update KB2463332 & will not update?

  I get an error code 0xD59 for the update of Service Pack KB2463332?  Then he wants to resart my computer for an update failed?  Why?

  Hello

  
  Click on the below mentioned link to manually install the update on your computer.
  
  Microsoft SQL Server 2005 Express Edition Service Pack 4 for Windows XP.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=184
  After you install the update, restart your computer and check if the problem is resolved.

• How can I remove guest account configured for the administrator?

  I tried to add a second user account on my computer and I blew it. My main user account is now defined as a standard account and no matter how many times I click the button to set it as an administrator account that he will not save these settings. The guest account (which I want to delete) is defined as an administrator account and it wont let me save it as a standard account, because there is no other administrator accounts. Even when I try to create a new account just to see what he would do he tells me that he cannot accept some of the characters that I use for the name of the account, even if it's just 5 letters, so I can't even create the new account.

  I have no idea what's going on with my user settings, but I want to just that everything back to how it was before... with a single main account configured for the administrator.

  Can someone help me?

  I bet that your administrator account is an admin account and your guest account is a regular account. Buttons that you look at don't tell you the State of the special consideration, but the change that you can apply. In other words, looking at the administrator account, the 'Administrator' button is highlighted not because it's already an admin account!

  Now you should do this, in the following order:
  1. Create a CD to repair Windows via Control Panel / backup and restore. People like you who make their own PC maintenance need.
  2. Test the CD.
  3. Create, test, and document an admin account to spare, even you have a spare House key.
  4. Disable the guest account.