error message; Complete training of k.

Similar Questions

• Unable to connect to the error message "inaccessible internet Web page.

  Original title: trying to connect, we get a window "inaccessible Web page.  Network does not appear in the list, and we also get an error message.

  Tried tech support.  The problem is too advanced.

  Hello

  
  1. What is the exact error message / complete?
  2. using a wired or wireless network connection?
  3. don't you make changes to the computer before the show?
  4. what web browser do you use?
   
  See the article mentioned below and check if it helps.
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196

   

  Disclaimer reset Internet explorer:

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  When you disable Antivirus:

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  It will be useful.

• Train Simulator of original disc installation - file already in use error messages.

  I try to install Train Simulator (Vista), I get an error message: files already in use, cannot be installed. I had it installed on my computer before, but I had to wipe my HD and do a complete restore on my computer.

  Hi Dave35,

  What is the full error message that you receive?

  Method 1:

  (a) copy the contents of the disc to install the game and save it to the desktop

  (b) try to install the game as an administrator do a right click on the installation program files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then try to install the game

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Change the error message by default printer 'Operation could be completed (error x 00000709).

  Original title: arthcua

  I'm changing my printer canon pixma canon pixma mp287 2700 tp fr..  I have already install the power driver of the company.  test print, scan succesfull.

  I'm now chanding pixma mp287 but unluckly that he will not change the default printer. When I right click on the printer pixma mp287 icon to install.  A State of error message "the operation could be completed (error 0 x 00000709).» Double check the name of the printer and make sure that the printer is connected to the network.  The name of the printer is correct and that the printer is connected to the printer.
  What is the solution.
  Thank you.
  ArthCua

  Hi ArthCua,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what version of Windows operating system is installed on the computer?

  2. is the computer connected to a network domain?

  You must enable WIA - Windows Image Acquisition. Now to do these following steps.

  a. click Start and type services.msc in the search box

  b. Locate the service:

  Remote procedure call (RPC)

  DCOM Server process Launcher

  RPC end point mapper

  Detection material core

   

  Make sure that the Startup type is Automatic.  Steps to set the auto services

  c. search for the service

  d. right-click on the service

  e. If the service is stopped and then Start the service

  f. Select Properties

  g and in the Startup type , select Automatic

  Enable these services. To click directly on it, click Properties, and make it automatic. Once you turn on all the start them. After all the services are started, scroll to 'Windows Image Acquisition' this automatic too and start it. Just restart your PC and you should be good to ride.

  Hope that this information will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?

  I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation.  What should I do?

  Hi BartlettNYC,

  Please see the links below, to solve the problems with Window XP SP3.

  Steps to take before you install Windows XP SP3.

  http://support.Microsoft.com/kb/950717

  How to troubleshoot a windows XP SP3 Installation failure.

  http://support.Microsoft.com/kb/950718

  Good luck.

• trying to install ati drivers for gfx card, get an error message, the installation cannot complete installation, install a vga controller

  Packard Bell, machine oem

  Model name: mc Maylee 1538.

  Model: utow-Sun

  Intel 3.06 GHz Prescott CPU

  BIOS Award of the medallion, v6. 00PG

  Motherboard: GiGabyte GA-8195PMD

  Intel 915P Bios for 81915PMD 10F NF

  hard drive was wiped out no. OS even if the PC is licensed, installed new operating system Windows XP Professional SP3, SP2 Office 2700

  BIOS is damaged impossible to read the menu, have fleeting glimpses of it being corrected but returns to the encryption.

  There was no noise, but this has been fixed with research assistant new material.

  looking for drivers for the card Gfx came with ATI Radeon Rage 128/128 pro, settle, but error message reads,.

  implementation was able to complete a standard vga controller/adapter

  the card is a gigabyte GV-NX62TC256DS, this number was under a gigabyte sticker which had the number GV-NX62LT256T

  get driver from gigabyte, but same problem nvidia

  some sites have returned the suggestion that it is a Nvidia Geforce 6200 THE but the nvidia for that driver will not be installed at all.

  message reads not nvidia GPU on this PC,

  I believe that the ATI driver will work, but the question that I can't solve is the VGA or Bios problem, I couldn't find any reference to VGA in the Bios when I ha d he briefly operation, it also does not detect the Gfx card as in the summary, it states that the size of screen resolution

  some of the numbers part of gigabyte I can not find and had to look for similar products there is a conflict with it being a PC OEM
  and windows both in Device Manager, the other devices with a yellow? and video controller (vga compatible) with a yellow? and yellow! on top

  Try this link: http://support.microsoft.com/kb/268852

• I tried to run Check Disk and get an error message on the completion of the phase 2

  I tried to run Check Disk and get an error message on the completion of the phase 2. If I try to run a defrag without having completed verification of the disc it comes up with error message Disk Defragmenter has detected Chkdsk is scheduled to run on the Volume: c. Please run f / dskchk. I tried to run it and nothing seems to happen. I checked that I have no other programs running and she thinks that this is the case.

  * original title - I check disk / defrag problems *.

  Kevin.

  How old is the hard drive? It is still under warranty? The easiest way forward is to replace the drive.

• Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

  When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

  I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

• Error message: "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

  Original title: problem with the Windows Installer Package

  I am trying to install an update for my video FlipShare program and I get the following error message "there is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package. Anyone has any ideas to fix this?

  Would be - what your anti-virus program blocks scripts? See:

  Error a Script required for this install to Complete could not be run when you run a Microsoft Fix it Solution! -Microsoft Fix it BLOG - Site Home - TechNet Blogs:
  http://blogs.technet.com/b/fixit4me/archive/2009/03/31/error-a-script-required-for-this-install-to-complete-could-not-be-run-when-running-a-Microsoft-fix-it-solution.aspx

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Control Panel / devices and printers, click the printer, get an error message "impossible operation completed (error 0 x 00000005).» Access is denied?

  does anyone know why when I go into Control Panel / devices and printers, I click on the printer I want and you get an error message "impossible operation completed (error 0 x 00000005).» Access is denied? I can't change the owner, or delete or something. Help, please!

  So far, I found all these shapes to be completely useless and a waste of time. I found out how to fix this and it looks like that many people would have put me the answer out there because nobody else will or knows it.

  -Start

  -Explorer window

  -C:\windows\system32\spool\PRINTERS

  And

  -C:\windows\system32\spool\DRIVERS

  -Right click on a folder at a time and select Properties, then on the Security tab and add the user you want to grant access to print and check that the 'Total control' box is checked. If the user name is already there, check the box "total control".

  -Note: Never simply put the group "Everyone" it as it will cause problems if you use a vulnerability scanner.

  It was on a Windows 7 operating system.

  Who should do this; Well it worked for me at least.

  Thanks for nothing, Microsoft and all the people here! ***

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• Error message: could not generate the complete form

  I can see my filled, but I get the error message "cannot generate filled" when I try to print or share.  I can only view my completed form.  I use the app on my iPad.  Adobe Fill & sign DC

  Hi carole67073503 ,

  Please visit this link that addresses the same issue: fill & sign - was not able to generate a complete form

  Let us know if you face any problem.

  Thank you!

  Shivam

• I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  Hi debg25514049,

  You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

  You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

  Kind regards
  Nicos

• Error message: "could not complete your request because of a program error."

  Whenever I try to select a color in photoshop, this error message appears:

  "Could not complete your request because of a program error"
  What should I do?

  

  (Ignore the ugly doodle)

  Hello

  Open PS

  Click on edit-> purge-> / Video all hides - do both

  Close and reopen PS and then do

  Let us know if it works.

  ~ Jitendra