Unable to connect to the error message "inaccessible internet Web page.

Similar Questions

• I'm not reliable connection of the error messages for LinkedIn, Yahoo, Mozilla and some other sites

  I just refreshed firefox and now make me the error message "this is an untrusted connection" for sites like Yahoo, LinkedIn, Mozilla and some other Bank websites. I've read all the articles and can't seem to understand what is wrong. Any help is greatly appreciated.

  Found the problem. It has to do with the Avast web shield.

  Thanks for your help

• Unable to connect to the error of MKS

  When I am plugged into the network, I can open the consoles of virtual machines without any problem. However, when I am out of the office and connect to the network via the VPN, it leaves me in vSphere, but when I try to log on to a computer virtual console, I get the error "unable to connect to the MKS. Unable to connect to the server {server name}: 902. Why I open a console when it is connected to the network, but not when I am connected via VPN? Thank you.

  See this KB Article

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=749640

• problems installing vRO 6.0.1 mac osx client.  Unable to connect to the welcome message after installation.

  I can't get the client to install on my mac and I'm running out of ideas as to what is happening.  The 5.5.2 client seems to work very well and if I broadcast the 6.0.1 client that also seems to work.  I can not get the local installation to run.  I always get the message "Unable to connect to host" when I try to run it.  If I go back to the 5.5.2 client it works fine and I can connect to my 5.5.2 instances.

  OSX version 10.10.2

  Version of Java 7 news 75 (at least that's the installer last ran, jdk installed 1.6.0 shows in /System/Library/Java/JavaVirtualMachines)

  I also see this error in the Setup log:

  Install uninstall: vRealize Orchestrator (install all components uninstall)

  Status: ERROR

  Additional notes: ERROR - uninstaller installation Error: java.util.zip.ZipException: error in opening zip file

  Because if this seems not uninstall it app works and I had to manually cancel the installation (which I might be leaving residues).  I manually remove the file .vmware to my directory and also remove ~/Library/Preferences/.com.zerog.registry.xml then by removing the orchestrator in the front applications folder directory to re-launch the client install.

  Paul

  Paul, please file an SR on your side. Feel free to reference the bug I introduced (1409281) when I had the same problem. Customer filed SRs help push resolutions

  -Burke Azbill

• Need help with the error message to a web gallery from Lightroom download

  Halfway through the process, I get an error message that says: "an error occurred sending the file: a response had not reached in time."

  I checked my settings, everything is correct and nothing has changed.  What is the problem and how to fix this?

  Hi PGMike,

  This problem occurs especially when there is something wrong with the FTP settings or the server is defined.

  Could you please make sure that there is no prefix "\" or post set in the path of the server.

  Also what version of Lightroom are you using?

  Kind regards

  Assani

• Backup of images in the error message: "Windows Internet Explorer: an attempt was made to load a program with an incorrect format.

  When you try to record images to the picture library, I get the message: "" Windows Internet Explorer: an attempt was made to load a program with an incorrect format. ""  I was able to record images before now without any problem.  Thank you!

  I tried your suggestions, but none seemed to fix my problems.  I was advised to remove the picture library, and then restore that brought me success.  Thanks for having me on the right path.

• What is this error message on a web page: "No. is pudo insertar IP 2605:e000:3 fc 0: 37:6563:1afb:8 d 61:9783 en datos base."

  When you click on a link to a web site in Spanish, I get an error message: "No. is pudo insertar IP 2605:e000:3 fc 0: 37:6563:1afb:8 d 61:9783 en datos base.»

  Is this a problem with the web site or on my computer?

  Thank you
  Lymsi

  The message says that it is impossible to insert your IP address in the database. It's probably a problem with your network. While I do not know what causes this, here's something to try:

  1. connect your PC directly to your modem via an ethernet cable. (yellow cable goes to the router) If you don't use Wi - Fi, skip this step.

  2. If you cannot access the website via the modem, call your ISP.

  3. If you can access the site via the modem, reset your router by pressing the reset for a few seconds button. (ATTENTION! This will reset your wifi name and password!)

  4. If you can not access the site, try to buy a new router. The NETGEAR N150 router is easy to set up and very affordable.

  Hey, I know it sounds crazy, but trust me; This solves a problem with my wifi does not not a specific Web site.

• Unable to connect to the printer, message error "module 126 is missing."

  Original title: 126 module is missing, how can I correct this

  I Reload windows XP and when I reinstalled my printer, my computer is unable to communicate with him and a message that the 126 module is missing.  When I try to open the printer (Lexmark x 5495) put in place & diagnose I get a message that a program has been moved or deleted.
  be grateful for any help

  Hello Campbell,

  This issue can occur due to corrupted drivers, drivers incompatible, if the print spooler service is not started, because of problems with the printer and the printer, missing updates settings.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab3

  Method 2:
  If the problem persists, I suggest you install the latest printer driver on the manufacturer's Web site.

  http://support.Lexmark.com/index?page=product&segment=support&ProductCode=LEXMARK_X5495&locale=en&UserLocale=en#2

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Unable to connect to the local network and internet

  VMware PlAYER 3.1.2

  The host is Windows 7 Ultimate x 64

  I created a few virtual machines, but none of them can connent to the LAN or internet.

  What Miss me?

  Thank you!

  Joeq wrote:

  I'm not sure about the difference between bridged and NAT.

  Network Address Translation (NAT) sharing the IP address of the host and is the default type of the network card.  Bridged connects directly to the physical network.

  Changed the default value under settings of Virtual Machines?

• Unable to connect to the servers of SnapChat. IOS 4.2.1. iPhone 3G. Error message: unable to connect to the server. Please try again later.

  Hello

  I can not connect to servers SnapChat

  IOS 4.2.1

  iPhone 3G

  Error message:

  Unable to connect to the server. Please try again later

  Thank you for your time and understanding.

  Hello!

  It seems that you can not use your SnapChat the way app which you should be. I would use the troubleshooting steps in the following article for third-party applications. You may well reach out to the developer if the problem is not solved by the article though:

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips

• Error message "unable to connect to the proxy server.

  I use Google ChRome as my browser. Unable to connect to the Internet. Error message "unable to connect to the proxy server. I went to the settings and tried to change the proxy settings. When I uncheck the box "use a proxy server" it does not apply only change.when I click OK, it always comes back to the box is checked.

  Chrome uses the Windows / IE settings proxy as do most of the browsers.

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• I can't import my script (film) into Adobe Story. The error message says that I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  I can't import my script (film) into Adobe Story. The error message says: I am unable to connect to the Adobe servers. Is this a problem with the Adobe?

  Yes and no it seems that if the file is a .doc or .pdf, that it does not load properly. But if I bring him in a Final Draft format, it works perfectly.

  Adam

  Sent from my iPhone