Error message: could not open the illustration. The illustration...

Similar Questions

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• What is the remedy for the error message "could not open the file mapping.

  When I start it, I get the message "filed to open map files. What is "mapping files" and how do I correct that?

  Hello

  If I understand correctly when you connect to your Windows XP computer the message
  "Cannot open the file mapping" on the screen, is that correct?

  Please provide some additional links for a better understanding of the issue.

  1. don't get this error when you start a program? Or is it random?

  2. What were the recent changes of hardware or software that are performed on the computer before the question?

  See also this Article on TechNet on the mapping of XP files among users. (Settings / / install to disable the mapping file)

• Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. 0x800420C8 error number.

  Cannot send e-mail in Outlook Express. Message "could not open the message from the Outbox folder. Account email Sympatico Server SMTPHM.sympatico.ca Protocol SMTP Port 25 secure (SSL) Yes, error number0x800420C8

  original title: 0x800420C8 error NUMBER

  Never seen a port 25, who wanted to use SSL, but by checking, Sympatico's apparently.

  1. This account has already worked? Is it simply to start?
  2. What is the exact verbatim error message? Otherwise, copy & paste it into a response.
  3. Have you tried to send a message and the message stuck in the Outbox?

• Error message - "Could not create the security default policy"

  I just reinstalled Acrobat X on a new computer (upgrade to Acrobat 8).  Now, when I open a file in Acrobat X, I get a message error that says "could not create the default security policy."   How can I fix? Pourrait

  Hi dawlaw,

  There is a bug in Adobe software. Acrobat X pro and standard both install properly if any other Adobe product was already installed, but both disrupts the installation (do not create the AppData\Security subdirectories) if another product from Adobe that has not created AppData\Security directories has been installed first. Adobe has only been tested installation on machines that never had other Adobe products installed. They do not consider that other Adobe products can already installed.

  (Alternative 1 (safer) - (a) uninstall all Adobe control panel products, b) then delete (or rename) the directories \AppData\Local\Adobe and \AppData\LocalLow\Adobe \AppData\Roaming\Adobe - Adobe never cleans these directories after uninstall. (c) make an own Acrobat x pro or standard installation before you reinstall any other Adobe product.

  Solution 2 - copy \AppData\Local\Adobe\Acrobat\10.0\Security and \AppData\LocalLow\Adobe\Acrobat\10.0\Security from another machine that works.

  Kind regards

  Nicos

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• Lightroom error message could not prepare the selected file to/volumes/etc...

  IMac OS X using Lightroom 6 10.9.5,, try to edit the photo in another application (photoshop elements / Nik silver efex pro 2 etc.) via Photo > edit in >... Error message "Lightroom could not prepare the selected rule to / volumes/etc.". (the folder where the file is located) ». Have followed all instructions / suggestions so far. Nothing has worked. Having installed and uninstalled and installed all the app:s for several times now.

  What to do next? It seems fitting that Lightroon does not allow me to use a surface-mounted.

  Hi juhamar,

  It seems that you don't have permissions on this site for Lightroom create any file.

  Please provide permissions for reading and writing at this location.

  Let me know if it helps.

  ~ UL

• When I try to change the PS CS6 workspace, I get the following error message: "Could not apply the workspace because of a program error." Does anyone have a solution to this problem

  When I try to change the PS CS6 workspace, I get the error message of passage: "Could not apply the workspace because of a program error." This happens when I try to change the default setting (Essentials) to any other predefined workspace.  Does anyone have a solution for this problem?

  If this fails, Menu Finder > go > go to folder

  ~/Library/preferences/Adobe Photoshop CS6Settings/workspaces (modified)

  Move the change case of workspaces on the desktop, and then restart the Psalm

• Cannot log on to Windows 7, the error message: could not update the BITMAP ' 6801´:24

  Original title: logon W7 error
   
  When I connect to my home edition W7 (genuine windows) and type my password it happens an error reading box:
  "Could not update the BITMAP"6801´:24"and when I click on enter 6801, 6802 changes all the way to 6812 once everything is back to normal.
  Ive made a clean boot it and I have no restore point system were everythings were very good...
  This somewhat bothers me so promptly!
  Have a nice weekend
  Jonas

  Hello

  Thanks for the update.

  We are pleased to hear that you solved the problem.

  If you have questions about Windows operating systems, help us on this forum. We are pleased to be of assistance.

• PS elements 11 cannot use the text function. Error message could not initialize the text.

  When I try to use the text function the letters do not appear. Text feature appears frozen. Get the error message - unable to initialize the text.

  Recently PSE11 uninstalled and reinstalled. Downloaded 2 Google font. Was able to use the text function with Google fonts with no problems. Two days later, attempted to work with the text function and the typed letters appear on the screen/layer. Tried to add the text with fonts pre-installed PS - still once, no text appeared. Impossible to set up a text box. How can I fix it? Thank you

  Suggest that you reset the text tool, that only he can fix.

  I believe in PSEv.11, there is a small arrow, top of the page to the left on the tool options bar. Click on this.

  If the arrow is not there, look in the options bar to the text tool, on the right, for a box with lines inside. Adobe changed the location and icon in later versions of the program.

• Problem installing iTunes - error message "could not open key".

  Suddenly, I was unable to open ITunes error indicating that another file is in use, even if no other program has been opened.  I installed RegServ to clean the registry and uninstalled ITunes.  When I try to reinstall ITunes, I get the following error message when it has almost completely installed: "could not open key: unknown\components\E1A4AEDEF4268F41BB4CFA5435985AC\4078CB48084001E41BD5E187685D1508.» Check that you have significantly access to that key or contact your support team. "I tried to boot, turn off the firewall - any solution that I could find on the web, but it still does not work.  I do not understand this message - can anyone help?  I have Windows Vista.  Thank you!

  Hello
   
  1. are you able to download other programs?
   
  Use Internet Explorer to download the Windows install cleanup. Alternatively, you can uninstall a program in the list of the programs and features.
  
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows-vista/Uninstall-or-change-a-program
   
  For more information on "troubleshooting installation or uninstalling programs" visit this link: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs
   
  If the problem persists, please contact Apple support team: http://www.apple.com/support
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to return to the line. Try using Firefox this AM. All I get is an error message "could not load the XPCOM.

  PC is several years old running Windows XP, but was working OK yesterday. This morning could not get Firefox at startup, only the error message "cannot load the XPCOM.

  Do a clean reinstall, delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  https://www.Mozilla.org/en-us/Firefox/new/

  Uninstall your current version of Firefox, for cleaning of the Windows registry and the settings in the security software.

     DO NOT  remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
  

     It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
     http://kb.mozillazine.org/Uninstalling_Firefox
  

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

• Error message could not initialize the canvas shared in Live mail

  When you use direct mail, error message.

  Failed to initialize the shared canvas: System. IO. FileNotFoundException

  Following a long text with strange error messages.

  It is having the effect that I am not able to create a live message.

  What should I do?

  IM using Windows Vista

  This was due to an update live essentials - if you have to live the next time that you update back to square 1 fundamental. I tried the system restore just prior to update and it was fixed up to reinstalled Windows update KB 2520039 - thank you

• The Windows Security Center error message: could not start the Security Center service

  I did disk cleaning, defraged, ran Malawarebytes and defender of the window, unexpected uninstalled programs, all my updates are current, delete all but the most recent restore points and ran the System File Checker tool Vista who finds some errors file that it could not fix.

  When I try to turn on the windows Security Center by clicking on turin on, I get "the Security Center cannot be started."

  Suggestions?

  Frosts of North

  Hello

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products do you have on machine now? And
  who have you ever on it, even if you have uninstalled them? (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error message "could not start the system event notification service.

  Original title: windows s event notification service does not start whwn that my PC is started

  Hello

  I'm running on the windows operating system 7, suddenly today I see when my computer starts, he says:

  1. windows event notification service does not start

  2. start menu back to Classic view, all of the aero themes has turned.

  3. right click on desktop seems to not work

  I have not had any installed software recently, don't know why it happened you can help me with this? I've restored a few days again the same question

  can someone help me?

  Sujith Hello,

  Thanks for posting your question on the Forums of community of Microsoft.

  According to the description, you got the error message "windows event notification service cannot start.

  I suggest to follow the suggestions of Bikesh T replied on 1 June 2011 from the link below and check.

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/failed-to-start-system-event-notification-service/eec9b5cd-fda9-43eb-B6D0-d2ba92e79413

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.