Error message D: / / is not accessible on the Satellite L series

Similar Questions

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I turned on my computer and found this error message, windows does not start because the following file is missing or corrupt, config sys files

  I turned on the computer and this error message was the first thing I saw, and I had to spend the next half-hour reinstall windows xp. I want to know why I had to do and what can I do if this does not happen?

  Hi Lady of shadows,

  ·         What is Windows now reinstalled and perfect work?

  If so, you can see the following article for future reference.

  How do I recover from a corrupted registry that prevents Windows XP startup

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Pad touch and function Fn + F5 does not work on the Satellite a series

  Hello

  I just install a windows Vista & I have install the driver after download it from the net, but I found this;

  1 - switch between the screen & s-video (fn + f5) does not work but the other work of function (fn)

  2 when I put my finger in the right of the mouse pad you have to scroll the screen & at the bottom of the touchpad, it should scroll left & right on-screen, but it did not work

  So please tell me the solution if it is a problem of driver or program.
  Please give me the direct link

  thinku

  Hello

  What cell phone do you have?

  I imagine that your laptop comes with XP and now want to use it with Vista OS.
  Please note that you should install the Package Toshiba Vista value added to use all the features of the laptop.
  Very important is the pilot of common components and the TOSHIBA Flash Cards.
  The Flashcards provides the Hotkey function and function of pitcher who starts the Hotkey function.
  Please reinstall!

  The additional touchpad functionality must be configured first.
  This can be done in the control panel-> mouse

  Here, you should look for the touchpad settings and able to configure touchpad again scroll areas.

  Good bye

• DVD/CD drive does not work on the Satellite L series

  My dvd player was working fine now, it is not on my computer.
  I can not restore from the product disc, such that he won read any type of dvd or cd disc.
  Can you help me?

  Hello

  At first try this please: http://support.microsoft.com/kb/270008

  If this does not please write again.

  By the way: put a recovery media in the DVD drive and try to start the recovery procedure. You will see that it will work. I guess described issue is only a problem of BONE and drive should work if you want to install the new OS.

• Re: CD device does not open on the Satellite a series

  Hay @ all.
  I posted a question about a week ago. I have change my Vista to XP.
  Now, I have another problem. I don't know but I had to install all the drivers graphic, sound ect. After installing XP.

  Then after that my bios updated my CD device no longer opens. My bios and my laptop detects it, but if I press the button nothing happens. I would like to add that the CD device has been opened during the update of the bios. I couldn't do anything. During the update the program warns me backup but backup my system has been disabled.

  Could you help find my old bios. I could not find anywhere...

  Hello Ahmet

  The question is strange to me. I updated the BIOS on several computers laptop A200 and P200, but there has never been any negative influence on the functionality of optical disc drive. Maybe I see it wrong, but I do not understand what the BIOS has updated with the functionality of opening/closing odd (optical disc drive).

  Usually, if you press the weird open button you should hear a sound it and the drive should open. Press the button several times. It should open properly. If this is not you must contact the service and clarify this point. You have the new notebook and it should work. The guarantee is valid and if the STRANGE must be replaced, it will be free of charge.

  In any case try to press the Open button. Is now a few CD/DVD inside?

• Error message "failed to load Tosrfcom" on the Satellite Pro U200

  Hello

  I have laptop Toshiba Satellite PRO U200 with pre-installed VISTA professional
  After restarting, even for the first time, having the following error in the event log:

  Log name: System
  Source: Service Control Manager
  Date: 07.07.2007 01:29:15
  Event ID: 7026
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  The next (s) starting or starting system could not load:
  Tosrfcom

  by:

  http://www.EventID.NET/

  Can't find a solution!

  someone knows how to fix this?

  Hey Buddy,

  did you have already recovered the system (installed completely new from scratch)? If it is already done, then do it and see if the same error again.
  Maybe it s just a software problem and can be solved by reinstalling the operating system.

  Welcome them

• Touchpad does not work on the Satellite a series

  Greetings!

  I have Toshiba Satellite and I have a touchpad issue.
  My touchpad does not work. I downloaded the drivers for it, and it still does not.

  Is someone can you please help me solve this problem?

  Thank you.

  What do you exactly mean with it s not working do not?

  What cell phone do you have? Have what the touchpad driver you installed?

  Have you checked if the touchpad was not disabled?
  Using the FN + F9 key combination, you can disable and enable the touchpad feature!

• Display adapter is not responding on the Satellite a series

  I make regular failure of the 7000igp radeon display driver. The display changes abruptly to a version low definition (4-bit color) to the title of the dialog says "display adapter unresponsive" also talks about ati2mtag.sys file enter an infinite loop and recommend the latest video driver from loading file.

  First I tried the drivers from the ATI Web site... .they wouldn't install at all... "" can not find the video driver ini file "and abandoned. Then I tried low load support of Toshiba, which seemed to install ok, but could not solve the problem. Also, I can sometimes get a blue screen that flashes up and then before I can read the laptop begins to restart.

  Please suggest a solution... Thank you

  Hello

  I have don t wonder that you are not able to install the original graphics drivers on the graphics card manufacturing site.
  These graphic discs are designed for use on desktop PCs only.

  Anyway, there is a little trick to install these drivers on the desktop.
  You must install the driver from the Device Manager. I mean that you must attribute the source driver manually.
  Notes; the source of the diver is the folder where the driver has been downloaded.

  You know the site omegadrivers.net?
  These drivers are very useful and could be installed easily without any tricks.
  Please check this box. Perhaps the installation of the new driver will solve your graphic problems.

  PS; Please come back and report your results!