Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

Similar Questions

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• When you try to format CD - RW, receive error message 'windows could not complete the format' Vista SP2

  Impossible to format CD

  Windows Vista Ultimate SP2 installed

  When you try to format CD - RW, error message "windows could not finish this format.

  Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.

  Help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use?

  See if help above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Otherwise:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message D: / / is not accessible on the Satellite L series

  Problems loading dvd write error message D: / / is not accessible. Cannot find help in the user manual.

  Is there something I am doing wrong? Do I need to load different drivers?
  I have tried DVD-R & DVD + R discs.

  Hello guys

  For me, it's stupid enough to write about the problem and not write what model of laptop you have. You have new models of laptops or some oldies? Do you use CD/DVD burning applications and which?

  Please try to start the recovery procedure to see if the drive can read the recovery media. Please post the results.

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• "Lightroom_5_LS11_mac_5_7.dmg" for Mac update my Lightroom 5.6 (build 974614) but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running OS 10 of Yosemite

  I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).

  Vk2mh looks that the download was not complete or corrupt.  When you download the update from?  Have you tried to download it again?

• Error 0 x 80070571: the disk structure is corrupted and unreadable

  I recently had an error message saying "error 0 x 80070571: the disk structure is corrupted and unreadable," in reference to C:. I tried chkdsk oh so many times. No change.

  Recently, I was able to access the C: files sporadically. Occasionally, sometimes not. However, I can access my files in safe mode.

  When I start in normal mode, the system is acting funny. I will try to describe. It starts very well, go anyway for the office and everything. Sometimes, I am able to use the laptop for a few minutes until everything freezes but the cursor; nothing else responds, even not ctrl + alt + delete. Other times, I'm still not that chance. You know how pointing the cursor on an icon temporarily highlights the icon? Highlight the thing is sometimes just to block the system. Once locked, all I can do is hold down the power button.

  I tried the system restore, but it never once helped me with the cause of the system error.

  I also deleted some programs out of the startup list. Not sure if this would have an effect.
  I am running Vista Home on a HP Pavilion dv5.

  Thanks for the reply.

  I tried all three methods.

  Methods 1 and 2 have helped for a while, but not long. Method 3 found nothing.

  The only solution I can think of is to backup my personal files, then do a system format. Before you do a format, is there anything else that you could recommend?

• After downloading CS5 and clicking on install, I get the message that the disk image is damaged and I should egect the Image

  I downloaded CS5 on the site was given to me by Adobe. When I click the button install, a message pops up "The Disk Image is damaged and cannot be installed, eject the disc" what should I do?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• The file system on the disk structure is corrupted and unusable. ...

  Dell Optiplex 3010
  WD5000AAKX

  Windows 7 Pro SP1 64 bit

  This is the drive that contains the operating system and was just replaced on 23 July. I restored the disk backups using Acronis True Image 2014.

  From July 25, I started to see

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume of OS utility.

  in the system (Source Ntfs, event ID 55) event log.

  I ran a CHKDSK /R on the disk and it reported no problem with the drive.

  Except for the scary messages in the system event log, I see no problem, but I also don't see these errors on the other disk in the machine.

  [I forgot to mention that the drive passes diagnostics pre-boot]

  What happens here?

  I see nothing in the article in PC Magazine directly addressed the problem. You were talking about the complexity and the possibilities of seriously screw things with True global Image?

  In addition, the link to the Microsoft solution irritates me to 'we're sorry, the requested page is not found.

  However, I think I found the solution, and it is quite related software.

  After scouring the logs of system events and application, I realized that the error I've been see is still bracketed by the subsystem VSS starts and stops and was almost always related to a backup operation or a virus scan.

  Some research (Google search, in fact) have allowed me to suspect that successful shadows of the disc were somewhat corrupt, so I simply deleted them (vssadmin delete shadows / for = c: / all). Since then, there has been no error reported, new instant shade have been created, and everything else works OK.

• Receive error message "you are not allowed to this directory or this page" using the identification information you have provided to the struggle. when upgrading to SP3.

  403-Forbidden: access denied

  While trying to upgrade to XP SP2, SP3, a server error message appeared as the title with the text "you not may to this directory or page using the credentials you provided for the fight."

  ????

  Hi ZRay,

  1. You use Windows update or manual download to install service pack 3 on the computer?
  2. During the process of upgrading to how you receive the error message?
  3. You have security software installed on the computer?

  I suggest you check out the article below and try the steps mentioned, check if it helps.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"

  http://support.Microsoft.com/kb/949377

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Fallout 3 PROBLEM! Error message. Could not initialize the rendering engine.

  I recently bought Fallout 3 for my vista system, I haven't installed very well no problem, when I click on play in the menu, it comes up with this error message:

  "Failed to initialize the rendering engine.
  Hardware T & L required but not taken in charge by adapter"

  Does that mean I need a new graphics card or I can download an update of Dell? My office is a Dell Inspiron 350. Please help ASAP!

  Lordy22

  Hello Lordy22,
  The fix for this problem is to install a new video card with T & L capacity.

  If please reply and let us know if your problem is resolved or if you need more help.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• While the research on how to correct an error in the observer of events, W32 tried merging a .reg file and got an error message saying could not access the registry, why?

  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  Hello, I'm under win xp pro svc pk 3, ie 8, x32bit.

  I received an error in the Event Viewer system for time synchronization W32. Help box said not to worry if it's a computer for the home user, but I'm tired of doing all the time, every day, so I tried to find a way to get rid of it. On bing, I found the above Web site and tried to merge the nist servers in my registry but I kept getting msg. :

  Impossible to import c:\doc and set\adm\dsktop\timeservers.reg: the specified file is not a registry script. You can only import binary registry files in the registry editor.

  the first msg not acceding, and I guess it was because I had the registry open at the same time. Anyway after that I couldn't import, just add the items in the registry manually.

  My question is, really, was performed correctly by the copy of the list of servers of time in the text, paste it into a file and you try to merge?

  Appreciate any assistance with this issue.

  Just for info:

  If you see a message similar to the following:

  Impossible to import c:\Documents and Settings\Jose\Desktop\enableit.reg: the specified file is not a registry script.
  You can only import binary registry files in the registry editor.

  That means either that your registry import file is missing the top line (or it's the wrong syntax):

  Windows Registry Editor Version 5.00

  or the file you are trying to import is not a valid registry import file.

• Receiver error message: "You can not have administrative permissions", downloaded Adobe Flash Player.

  Original title: what it means when you download a file, but an error pops up saying you do not have administrative permissions, but actually you download from an administrative account?

  I am trying to download the latest version of adobe flash player from their site. When I try to download it, it will tell me I have not sufficient permissions to do so and I am downloading to an administrative account, and it still does not work.

  Hi Antonlew,

  1. are you able to install/download other programs without any problem?

  2. did you of recent changes on the system?

  3. you receive the error message when download or install Flash player?

  If you run the installation files, you can try using administrator privileges and check if that helps:

  Right click on the program installation files and then click run as administrator.

  See the article:

  How to apply once with a full administrator access token?

  You can also check out the link to Adobe support and check if it helps:

  Installation problems | Flash Player | Windows

  Important: The above link contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, you can view the article:

  Back up the registry