AP thunking spooler does not work

Similar Questions

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• Printer Hp5510 crashed. Software removal - tried reinstalling. Cannot install printer Message "print spooler does not work - what's up."

  Hi all

  Need help

  Hp5510 locked

  I works fine when connected to my laptop - but-not when it is connected to Compaq Presario desktop mu

  Software removal - tried reinstalling. Failed to install.  printer Message "print spooler does not work - what's up."

  ↑ hanks

  Scott

  Consult HP printer experts found in the HP printer Forum.

• I can't print. It says local print spooler does not work, restart the printer or machine.

  I use windows7, I can't print. It says local print spooler does not work, restart the printer or machine. I can not install, or add the printer currently installed in my computer. Help, please.

  Original title: printer

  Hello

  The print spooler is the mechanism that will interface between your application and the printer and coils (sends) the print job to the printer. It should start automatically when you start your machine. So, restart your computer and try again. I suspect that the real problem is to find why the print spooler has stopped in the first place.

  After trying again, see what happens and if your print spooler stops again, the real work will begin.

  Kind regards

  BearPup

• Printer spooler does not work. Printer registry file corrupted

  My printer HP Deskjet F2430 does not work. The print spooler is not running. I can't stop and restart services. The registry file is damaged. No printer is displayed in the printers and faxes Control Panel site. How can I clean up the corrupt registry files? Thank you very much.

  Hi MIchelle,

  What exactly is the problem? You are not able to start the service of coil?
  Try to click on Start-> Run Type & -> services.msc-> spooler printer-> Double click on-> start and select automatic for startup type.

  If give you the error, try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  I hope this helps.

• Print spooler does not work

  Cannot print and all of my printer disappeared from my print list. Print spooler not working do not mistake

  Cannot print and all of my printer disappeared from my print list. Print spooler not working do not mistake

  You can start the print spooler by clicking Start > run and type the following command in the box run and then click OK:

  net start spooler

  The real question, however, is why the print spooler service is stopped and you should do to prevent it to stop again.

  You have a recent antivirus application with an active subscription? Which one?

  Have you scanned your system for malware using MalwareBytes Anti-Malware AND SUPERAntiSpyware ?  If this isn't the case, get these free scanners and do.  Do not forget to update before you scan them.

  If you have never installed a Lexmark printer, follow the instructions in a single Article to remove and reinstall the drivers for your printer.

  If you have or had a Lexmark printer, follow these directions as well (from http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm )

  If you have a Lexmark printer , these additional steps may be necessary (thanks to Robert Orleth [MSFT] to provide this information).  Sometimes, the Lexmarkprinter installation process installs a service that makes dependentPrint Spooler service itself.  If there is a problem withservice Lexmark or a Lexmark printer driver (or you have removed using the procedure above),Print Spooler service does not start (see also http://support.microsoft.com/default.aspx?scid=kb;en-us;324757 ).  The steps below makePrint Spooler service only on service (RPCSS) remote procedure (RPC) call, which is normal.  Print Spooler service dependencies are stored in the registry at

  HKEY_LOCAL_MACINE\SYSTEM\CurrentControlSet\Services\Spooler\DependOnService

  ... The sc config command resets the value for this entry.

  1. Open a command prompt window

  2. the control key
            sc config spooler depend = RPCSS
        (Note the space after the = not before)

  3. Restart print spooler (see steps 8 and 9 above)

• I get a message that the print spooler does not work

  printer was arrested, computer, shut down, turn on the computer, open a word file, checked the spooler.exe and it sees immediately 99% CPU usage.  Then I get a message that says that the spooler is not enabled.  What should I do?

  Are you trying to print before you get the error message or just come to the top as soon as you open a microsoft word file? are you sure this is spooler.exe which is taking up all the CPU not all processes combined?

• My printer is installed and then quit all of a sudden - when I go to the printers and faxes, he won't let me not reinstall my printer - the prompt says print spooler does not work. What I can do. "

  My printer has been installed then suddenly stop working.  When I go to printers and faxes, he won't let me not reinstall my printer - I get a prompt that displays the print spooler isn't available...  What is it and how can I solve this problem

  Printer in Windows problems
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;324757

  J W Stuart: http://www.pagestart.com

• "print service spooler does not work" with newly installed printer

  Just installed new hp deskjet 3054. has been running for a short period. now the error message reads "not running print spooler service" never had this message before

  Frank,
  Please visit this link & run microsoft fix it tool to solve:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Chebli.

• the print spooler does not work

  removed and reinstalled the Lexmark 2600 software, but without success.

  Click on the Start Menu, click Run, type "services.msc".

  In the Services pane, click on "Alert" and scroll down until you see "print spooler".

  Click on "Start service" or "Restart Service", as the case may be.

  The print spooler should work now.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Message error "the print spooler does not work.

  SONY VAIO laptop

  The print spooler service is not running

  How to fix this?

  my computer - click right-manage-click on services and applications-services-look for printer spooler click on TI-restart then set to auto.

• print spooler does not work cant use printer

  I have already commented on a previous post, but have not been answered so wrong to send the link to this post with what I posted and steps iuve taken complete with pictures and descriptions perhaps comment you on this post or this one ill control the two ty

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-wont-run-cant-find-printer/fb28decd-8488-4AD5-995a-ddbf90fbab66?tab=question&status=AllReplies#tabs

  Your question is very difficult to understand.  It is not at all clear who, if any, you have followed the procedures proposed by KB810894.

  Assuming you have Windows 7, download and run this Microsoft Fix It program--> http://go.microsoft.com/?linkid=9829711

• Help with the Printer Spooler service does not work error

  How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.

  Thank you.

  Hi elvenlord21,

  See the article below which has some useful suggestions to fix the print spooler error.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  See also:

  Error message when you use the Add Printer Wizard: "Operation could not be completed.
  http://support.Microsoft.com/kb/314876

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MPrint spooler does not not on my Windows XP

  My print spooler does not work on my windows xp. I tried to restart on the way to the print spooler service and click Start, I get an error 1068, when I try to run the software for my Office jet 5780, which he continues to stop the print spooler does not and when I click fix, that nothing is happening, anyone have any ideas. Thank you

  Hello kiltoony,

  The first thing that we should use in the resolution of printing problems are scanning HP Print doctor.

  Doctor Scan HP printing can be found by going to http://www.hp.com/go/tools that the doctor is used to solve the various problems that can occur that cause the printer to not print, scan or have problems of global connectivity. It is the first tool when you troubleshoot any problem that belongs to these three compartments, it is help to solve the problem or point us in the right direction with regard to the origin of the problem.

  After running the Print Scan Doctor let me know the results and if he sees any problems.

• Print spooler does not. Unable to use printer

  Cannot print.  Cannot add a printer.  Can't download new drivers.  C:\WINDOWS\SYSTEM32\SPOOLSV. EXE is a program that does not work.

  Quote from: http://snipurl.com/1mdayq [www_eventid_net]

  From a newsgroup post: "it seems that the print spooler does not and that it was impossible (or not configured to) restart itself.» When the print spooler does not work, printers will be not visible in the Printers folder, and you will not be able to add a new printer. A number of things could cause the print spooler to fail. It's corrupt print jobs, incompatible or problematic printer drivers or port monitors, corrupted file or disc and even other applications or processes interfering with the spooler in memory. If you try to manually restart the print spooler and it fails immediately, he may be trying to process a print job corrupted after the start. It is a common cause for the print spooler failures that occur immediately. If the print spooler starts and printing features returns for a while before a failure once again, then a monitor driver or the port is probably the cause of the problem.

  To remove print spooling jobs that could cause this problem, simply remove (or remove) the files with the extension ".spl" or ".shd' of the location of the coil when the print spooler is stopped. This place is typically "c:\\system32\spool\printers" (it might have been edited manually). Once the existing spool files have been deleted, try to restart the print spooler again to see if it works normally. If there is no (.shd or .spl files) spooling print jobs, or remove the old spooling print jobs does not change the behavior, a port monitor or driver may be to blame. " M260142 provides information more detailed which will be useful in troubleshooting.

  Hope this helps, Gerry Cornell