Error message from device IO on the DVD ram drive

Similar Questions

• P20: cannot use the DVD - RAM drive after installing a trial software

  Hi members,

  I am using Toshiba satellite P20 - 604 model - load with windows xp prof - SP2. I wasn't able to use the software from burning DVDs successfully, so I tried to install cyberlink Power2Go software (trial ver) in there and ended up with "No. DVD RAM DRIVE APPEAR" in my computer. I could see the device dvd - ram with a yellow exclamation point in Device Manager. (the drive model is MAST * A DVD-RAM UJ-811). I tried to update the driver for it, no use. No idea how to recover the original driver and make it available for use dvd - ram drive? waiting for your valuable solution.

  Thank you & best regards

  M.Kanagaraj

  Hello

  The easiest way is to use the system restore option if you have created a restore point before you have had an experience with the trial version of Power2Go. If this is not the case, check if there is a system restore point has done in recent days.

  Good bye

• Error message: a device attached to the system is not functioning

  I have dell laptop studio 1535 with windows vista
  now when I click on manage network connections it give me a massage which is error "a device attached to the system does not" what do I do?
  Thank you

  Hello

  ·         What type of connection you are average (wired or wireless)?

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system until the problem occurred?

  Method 1:

  I suggest to refer to the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/933664

• Cannot read Photostory. Error message: "a device inthi system does not work.

  After building a slideshow Photo Story 3, I'm trying to play and get the error message: "a device attached to the system is not functioning:.»

  Unable to identify this device.

  Any ideas out there?

  Hi ld1925,

  • Did you the latest changes on the computer?

  Method 1

  I suggest that you install the updated drivers for the graphics card on the computer by visiting the manufacturer of the card or the computer manufacturer's website and check if it helps.

  If the update of drivers help not then uninstalled computer display card drivers, then reinstall the latest driver update.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Use Add/Remove remove programs and Device Manager to uninstall the drivers for the computer.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, see if the problem continues in a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• Viva Piñata was unable to locate the DVD - ROM drive

  Hello!

  I installed the game Viva Pinata on Windows XP Pro in English when I try turn on the game there is a message like: unable to locate the DVD - ROM drive.

  On the other computer (Windows 7) it works very well!

  What does not help?

  -Instalation of safedisc.exe.

  Help me please!

  Hi MarcinKowal,

  ·         Did you do changes on the computer before the show?

  ·         The installation of the game Viva Piñata was successful?

  You can read the following article and check if the problem still persists.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Let us know if that helps.

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• DVD - RAM Driver Software Uninstall Fails__

  Upgrade Windows 7 Home Premium install because I can't uninstall the DVD-RAM driver a software

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview

• How to display the error messages from sql/pls call

  Hello

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Hi AZZ.

  AZZ says:

  How can I display error messages from pl/sql calls on application pages?

  Current situation:

  If I specify "Error message" in the process - well, that's what I'm going to get on the page.

  What I want:

  I would like to have the specified aka "user friendly" message with the actual pl/sql routine. so it helps me to understand where the error occurred.

  Yes, agree with orpheus4192. Use the APEX_ERROR. ADD_ERROR API.

  Reference:

  • Re: Re: error in the processing of the page management
  • https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/apex_error.htm#AEAPI2217 (APEX 5.0)
  • http://docs.Oracle.com/CD/E37097_01/doc.42/e35127/apex_error.htm#AEAPI2217 (APEX 4.2)

  Kind regards

  Kiran

• HP Pavilion P6 - 2100 on the error message from Windows 7

  I tried all the things recommended on Microsoft and on the internet. Nothing works to get rid of this error message. Others have had the same problem and finally, I think we all give up trying to find a real answer.  Please help us fix.

  The error message is:

  error unknown message turn off '-auto'

  Hello again ucimdboss2,

  Thank you for your quick response. Nice that you said that I recommend that you perform a factory restore. The HP Support document: backup of files (Windows 7) should be your first step. This document will provide you with instructions, you should back up your user files so that you don't lose it when you make the resumption of the plant. Then, you want to follow the HP Support document: performing a recovery of HP (Windows 7) system, which will guide you through the process of restoring factory HP. Once complete, you can restore your backup of the files and be back on without software errors.

  These steps will be clear all errors in your operating system and return your system to operate as it did when you bought everything first.

  I think that this will solve your error. Thank you for bringing This problem on the HP Forums. Have a great day!

• error message this device driver has stopped responding, but recovered. What can I do to fix this?

  HP G72-b60US notebook

  Windows 7 Edition 64-bit family

  Intel graphics card

  I play a game and it's going very well for 10 minutes, then screen wil go black and trying to "fight" to override the game to bring up the office. then an error message is displayed to tell the device driver is not responding but recovered. I'm trying to get back into the game, but it doesn't allow me not-screen remains black when I try to turn on or off. so I have to ctrl-alt-del to bring up the Task Manager to stop the game. Then, the computer and the graphics card works fine. I tried to see if the driver for the graphics card needs update but the CV Wizard and windows update tells me that everything is fine. Help?

  Thank you.

  Angie

  Hello

  A.

  Check that your laptop is overheating or not.

  To do this use HWMonitor (free and recommended).

  If it detects overheating, consult this guide.

  B.

  Update the Bios.

  The update of the Bios?

  
  

  Download the last update of the Bios here.

  Connect the power adapter to the netbook.

  Disconnect from the Internet. Close all running programs. Disable anti-virus and firewall.

  Double-click the Bios update exe file. It may take some time, so it is important to remain patient, not to interrupt the process. Allow the laptop to restart after applying the BIOS update.

  Although this update is running are not:

  • Turn off your laptop,
  • Disconnect the power adapter,
  • try to run any software or do anything thereon.

  Note:

  The Bios update process is always risky. You do this at your own risk.

  C.

  Update the graphics driver.

  Uninstall the Intel graphics driver.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

• T440s error message from two fingers Scroll - does not work - Synaptics

  Hello! T440s, Windows 7 Professional. Never had a problem, then suddenly two-fingers Betacam touchpad scroll no longer works. When you go to control panel, mouse, I get (when you click on the mouse) the error message "unable to connect to the Synaptics Pointing device driver. If I then click OK in the error message windows menu mouse opens but not sure what to do.

  Thank you for your help "!"

  OK found myself: Reinstall "Synaptics ThinkPad UltraNav Driver for Windows 8.1 (32 - bit, 64-bit), 8 (32 bit, 64 bit), 7 (32-bit, 64-bit) - ThinkPad" from http://support.lenovo.com/ch/en/downloads/ds034647

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• Error message when I run delete the query in SQL Server 2008.

  Error message when I run delete the query in SQL Server 2008 SP3.

  Error message:

  MSG 0, level 11, State 0, line 0
  A serious error occurred on the current command.  The results, if any, should be discarded.

  I never got any problem since 5 years.

  Please let me know what is the cause of the problem.

  You can get a response better/faster if repost you your question in the instances of SQL Server dedicated from Microsoft here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  Thank you.   :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)