Error message states that Windows cannot read the Service Notification of system events. Unable to start the computer.
Original title: System Event Notification Service does not connect.
Computer will not start. Error message states that Windows cannot read the Service Notification of system events.
Hi DACL.
· What is the full error you receive when you try to start the machine?
· You did it all change hardware or software on your machine before this problem?
You can restore the system to the Windows recovery environment and check if you are able to boot to the desktop. Follow the steps in this link to boot into the Windows recovery environment and select the system restore option.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
Repairs to the system of Windows recovery environment
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I get an error message when I try to open internet explore and I get in safe mode as well... He said windowns cannot find "C:\program files (x 86) \internet explorer\iexplore.exe someone help me please!"
Hello
x 86 is 32-bit operating system
and the 64-bit vista 32-bit and 64-bit browsers explore included
The Internet Explorer shortcut in the Quick Launch toolbar, and in the x 64 Vista Start menu will run the 32-bit version of Internet Explorer by default. Why run the 32-bit version if IE on the 64-bit version of Vista?
There are actually two shortcuts for Internet Explorer in the "Programs" menu Why two and what is the difference?
This is the title of each and they run exe:
Internet Explorer
"C:\Program Files (x 86) \Internet.Internet Explorer (64-bit)
"C:\Program may Explorer\iexplore.exe.Run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?
Thank you
Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver. It may have been a conflict of name or something.
Concerning
Adrian
-
Is watching the guys, I think not that this is a 7 days without some kind of sleep problem, but I can't work out why Windows Media Player 12 will not rip a CD I put it in, I get an error message saying that Windows Media Player cannot find the file I'm tearing and maybe it is moved renamed or deleated in the meantime that my CD is in the CD/DVD drive waiting to be fooled on my laptop Windows 7 64-bit. I ripped the CD loads before but I had to reinstall a complete a month ago, and this is the first time I tried to extract anything on my laptop. If anybodys got any ideas on how to solve this problem, my inner peace would be much more peaceful MCE! Cheers and Happy New Year to the United Kingdom, I wish you a good and peaceful 2014. Rich.T
Hi Rich!
This might help: http://www.fixkb.com/2010/07/when-ripping-musing-with-media-player.html
See you soon
Julia -
I tried to open a quick book of my automatic backup hard disk folder and it gives me the same message.
Hello
1. What is the exact error message you received?
2 have. what program you tried to create a backup?
3. what version of QuickBooks is installed on the computer?
I suggest you follow the link and
Error: Restore failed, when you restore a backup file
http://support.QuickBooks.Intuit.com/support/articles/SLN41507
-
How can I fix a windows cannot find cmeauvist.exe problem?
I found the problem. I tried to install it from the zip file, I need to decompress the file and then install it.thanks
-
Original title - Windows cannot read blank disc
When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you have a problem with the disc.
As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.
I suggest you run the Fix-it tool and check if it helps.
This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.
See the link below.
https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.
Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.
-
Unable to connect because of firewall or something, not true of course
When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.Hello
I suggest you to follow the steps in troubleshooting this article and check if it helps:
Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
http://support.Microsoft.com/kb/871122
Also read these articles and check:
In Windows network connection issues
http://support.Microsoft.com/kb/313242
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Windows cannot read the disk in drive c.
I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?
Not all DVDs are the same, there are many different types and some DVD players may require a particular type
If the DVD is blank has nothing to read, that it is not formatted/prepared
With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works
-
Windows Media Center - I get an error message indicating that Windows Media Center will not open
Hello
Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance
Robert,Thanks for reporting the good news. Enjoy!Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:>>> Hi Barb,>> Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.>> Cordially.>> Robert.Barb Bowman
-
When I place a disc in my CD - DVD player, it says that it cannot read the media.
I use a Windows 7 computer and everytime I put a DVD in the drive, it says that it cannot read the disk media. I tried to uninstall and reinstall it, I also tried the Player update. The computer realizes that the drive is in the computer, but it will not play any DVD or CD. Anyone know how I can get running without having to disassemble the computer?
Clean the disc with a DVD cleaning disc, available in most stores and retail businesses. If this fails so that the reader has probably not and must be replaced.
-
I tried to uninstall a program under Vista 32 SP2 and received an error message indicating that WIndows Installer is not accessible, as it is not in service. What happened, I used to have because I was install/UN-installing for quite a while. Help, please?
Thank you
Please stand out my answers as answers.
Sorry, I could not solve your problems.
Someone else will have different ideas to set your.
See you soon.
-
Windows could not connect to the Service Notification of system events
Yesterday, everything was normal before turning off my computer. However, I saw a message "that Windows could not connect to the Service Notification of system events" after I turn it on now.
My operating system is "Win7 Ultimate". What should I do to fix this?
Hi Aporch,
You can check if System Event Notification Service is enabled and set to automatic.
Here's how you do it;
1. Select start > run > and type services.msc.
2. scroll down until you find System Event Notification Service and make sure that it is running and set to automatic.
Also make sure Remote Procedure Call following the same steps above.
3. restart your computer.
If this does not help, try this:
1. click on the Start button.
2. type Cmd in the search text box.
3. press on Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
4 type netsh winsock reset at the shell command prompt, and then press the Enter key.
5 restart the computer
If please reply and let us know if your problem is resolved or if you need further assistance
Aziz Nadeem - Microsoft Support
-
HELLO, I HAVE A CD/DVD EXTERNAL BURNER, IT READS THE CD AND IT RECOGNIZES THE VIRGIN CD, BUT WHEN I PRESS ON THE "START BURN" BUTTON, I GET A MESSAGE SAYING THAT WINDOWS MEDIA PLAYER SHOULD BE CLOSED, HE DOES IT ALL THE TIME
Hello
Welcome to the community Microsoft and thanks for posting the question.
According to the description, it looks like you are facing some problem with Windows media player.
He would be grateful if you can answer this question in order to help you further.
1. which version of the Windows operating system is installed on your computer?
2 have you made changes on the computer before this problem?
3 is the issue limited only when burning to disc?
I suggest you to consult the following Microsoft article if you are using the Windows XP operating system.
Windows Media Player has encountered a problem and needs to close: http://support.microsoft.com/kb/555494
If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
OP: Action Center... PC problem: 1 important message
After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?
Hello Irfan,
Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!
wandrinstar
Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.
Keep up the good work,
wandrinstar
Maybe you are looking for
-
Equium A200-1V0 - cannot create the hibernation file
Equium A200-1V0, Vista Home Premium (SP2) Hibernation has disappeared recently. I just did a cleaning disc. I have tried to go to the command prompt and enter powercfg / hibernate on, but I get a message saying that the system could not create the fi
-
Pavilion 13-a110dx: password administrator or power on password
Hello I have a HP Pavilion 13-a110dx that won't start. We have configured our system OS and other software, but at a certain point in the BIOS (or EFI, don't know who) reset default and now he asks a password I never set. When you try to enter a pass
-
Load a file in tiara with a use using LabVIEW
Is it possible to load a file into tiara with a use that is customized by using LabVIEW. I looked through the palette and see nothing.
-
Windows 7 SP 1 & fix security for Windows Aero
Anyone know if Microsoft will come out the security fix for the issue of the Aero de Windows theme that was released earlier? Microsoft has already released an update for this; can we expect to find in Windows 7 SP 1? Which will include the SP1?
-
the cursor moves around, cannot easily place
original title: after I spend my lap - top, the slider skates autour, & I have a hard time putting it where I want. Why is this happen, and can it be corrected? What can be done to correct this problem & what are the causes? Thank you