Error message: SYSTEM_THREAD_EXCEPTION_NOT_HANDELD while upgradeing to 10 Windows

Similar Questions

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54

  My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.

  Hello

  The exact error message would have been very useful because it may be Malware.

  It may be a legitimate program.

  http://support.Microsoft.com/kb/174381

  http://www.fileinspect.com/FileInfo/MSDTC-exe/

  Would that be it: "MSDTC Console?

  And can be malicious:

  http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html

  It can be a boot entry remains of this Malware.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after the scan post back or if it was malware take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Error message "unable to connect to a Windows service.

  Whenever I boot my Toshiba ultrabook and go to Internet Explorer (not the tile splash screen), I get an error message: "unable to connect to a Windows service. Windows could not connect to the Service Agent all Windows users. This problem prevents standard users connect. As an administrator, you can view the system event log to see why the system has failed. "One of the consequences, it seems that when I go to my Windows Live email account via the Mail tile, it is no longer updates the Inbox (to any new email here for the last week or two). Another application (XE) is now longer provides updated information on its tile.

  What should I do?

  Hi Chris,

  Thank you for the update.

  I suggest you follow these steps to start the Windows user all install service agent and check.

  a. press the Windows key + R and type services.msc.

  b. search for Windows user all install agent service and right-click on it.

  c. Select Properties and dependencies tab.

  d. check the competent services for the process and close the window.

  e. now search DCOM Server process Launcher and set the type to be automatic and start the service to start.

  f. now seek the End Point Mapper RPC and set the type to be automatic and start the service to start.

  g. now go again to Windows user all install agent service and set the type to automatic and start the service to start.

  h. now, reboot the computer and check the status of the service. If it is not started, start it and look for the question.

  Let us know the status of the issue.

• error message C00D1199 while using Windows Media Player

  I'm having a problem getting a video playback with video, that I took with my camera. I never used to have a problem and everything would be reading. Suddenly, no video would not play back and I only got an error message saying that the codec used to compress the file is not supported by Windows. I converted all the files and thought of AVI format that would help, but no luck. I tried to run the Microsoft Fix It and only made his return to some but not all the files. Others still play the error. Any help or advice would be greatly appreciated.

  Hi Marz_Y,

  (1) who fixit are you referring?

  (2) you are able to play recorded videos sample without any problem?

  You can follow the steps mentioned in the link below

  Windows Media Player C00D1199

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  (Procedure described in the above link applies to Windows Vista)

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message trying to upgrade from Vista to Windows 7

  original title: upgrading Vista to Windows 7
  My laptop is running Vista, and whenever I try to upgrade to Windows 7 it gets 95% done then he tells me impossible to install until I have uninstall the ATI Catalyst Install Manager is - anyone know why. Rick in Chicago

  A lot of software ATI is based on .NET technology and is deeply hooked into the system - personally, I would uninstall all ATI applications before the upgrade and then if necessary updated thereafter, with costs compatible Win7 downloads for ATI Control Center.

• Error message when you try to install Windows on OSX 10.10.5 10

  I have a Mid-2014 retina Macbook Pro and I am trying to use the Bootcamp Assistant to install Windows 10 on OS X 10.10.5 and Bootcamp version is 5.1.4. I can't upgrade to El Capitan from now due to work related software, long story!

  I took the steps so far:

  (1) reset the PRAM.

  (2) reset SMC.

  (3) ensure that only a single partition is present using disk utility.

  (4) check the permissions of the drive and repair at least twice.

  (5) check the disc.

  (6) use Bootcamp assistant create the Windows Installer by using 64-bit Windows 10 iso file downloaded from Ms. All boxes have been checked.

  (7) in a suitable place when Windows Setup asks me what partition choose, I select created Bootcamp partition and click on Format. Product key has been entered each time.

  (8) installation continues until the point where it says "Ending up", then a pop-up window comes up saying "Windows cannot update the configuration to start the computer, Setup cannot continue."

  (9) I click OK and the window behind what is said "installation has been cancelled, any changes made to your computer will not be saved."

  (10) the computer is stuck on this screen for awhile. When, finally, he tries to restart, I just get a white screen. and eventually everything goes off.

  (11) when I turn on again, if I hold down the Option, I can see the OS X partition, partition Windows, recovery disc, then Windows on my USB (in yellow) and the "EFI Boot' in yellow.

  (12) I tried to click on Boot EFI, and goes through the same installation process and gives me the same error.

  (13) I tried to click on the Windows USB button, it starts to install (with the normal resolution unlike every other time) and this time gives me the error message "Windows cannot be installed on partition disk 0" (View details) "when I click it, it says"Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  I'm pulling my hair out on this one (and I don't have much to lose) Please HELP!

  Your Mac of 2014 is able to support two different types of Windows, most modern BIOS or EFI old installation.

  The Windows icon on USB is the method inherited from the BIOS while the start EFI icon is the most recent and modern method. Each has its own requirements for partitioning.

  2014 BC on 5.1.4 Assistant should have three check boxes. The first two should be checked only once to build the installer, while the last one can be used as needed.

  1. use the last checkbox to delete the current partition of BC.

  2. use only a USB flash drive (USB2 is preferable), other USB devices or SD cards cause problems.

  3. run SMC/NVRAM reset external storage after everything is disconnected.

  4. the USB should be directly connected on the Mac. Do not use a USB hub.

  5. your ISO source must be an ISO only 64-bit and about 4 + GB. ISOs larger and mixed-mode are not valid for MCR, although they can run on an ordinary PC.

  6 re - run BCA and check the last box - only install or delete... and try again.

• I receive the following stop error message when you try to install Windows XP: Stop: 0x0000007B

  I need help with this error code: Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000)

  I'm a noob Microsoft Answers. I have an old computer, I'm trying to reinstall Windows XP.  It's a Dell XPS Dimension 3 (3.40 gigahertz Intel Pentium 4, 1 G of RAM).  It does start normally or in Safe Mode.  I tried to use Fixmbr, Fixboot, Bootcfg/Rebuild, chkdsk/r, Memtest86, Killdisk.  I tried to install using another hard drive (which leads me to believe that it is perhaps a hardware problem).  He gave the same error code, I think, even if I didn't write it.  The only thing I found that I have not tried is "How do I recover from a corrupted registry that prevents Windows XP startup" because it is said that it will not work on OEM devices.  The error code is Stop: 0x0000007B (0xF7C85524, 0xC0000034, 0x00000000, 0 x 000000000).  I tried to install Ubuntu on two disks and they have installed and worked properly.  I don't know what else to try except hardware troubleshooting, although I'm not too good with hardware problems.  If you have any recommendations that could put closer me to a resolution I would be very happy!

  PS Windows XP actually ran on the second hard drive, I have tried (which is currently the drive in the machine at this time).  I installed it and it starts directly in Windows.  Yay!  I have restarted this configuration several times without any problems.  But I had a problem with the Microsoft Security Essentials update so I thought that a clean install would be better.  In hindsight, I wish I had tried harder to solve this problem, but I did not.  The first hard drive suffered a crash of Windows led me to be upgraded to a Windows 7 computer.  It was more than 1.5 years ago.  I just thought that the full back story might help.

  Hello

  I'm close to some (but my experience tells me very little is certain at 100%), which has a generic windows installation CD install without the need for the Setup F6 disk, as long as the BIOS is set to RAID Autodetect / ATA (or possibly 'mix'). AHCI is a more efficient disk access method but requires F6 floppy or "slipstreaming". If the CD is already slipstreamed for your PC, AHCI should work without F6. As you say your default BIOS to auto detect RAID/AHCI, I expect a CD specifically for your system to support it, while a generic CD would not.

  I doubt that they will provide F6 floppy but you never know. If you do not ask that you probably won't get.

  You can mark the answers on this topic as "answers"...

  

  .. But if I remember correctly, you can only score a maximum of 2 'responses. I offer my final diagnosis (and maybe my first answer) as candidates, but it is completely at your discretion. You can even hold off on tagging the "answers" until you get another CD from Dell and try. It also helps other people viewing this thread hoping to find a solution to 7B stops.

  You can designate the other answers as useful if you think that it is appropriate.

  Tricky

• Firefox 11.0/12.0 does not start and gives no error message, how do I fix? Windows 7/8

  Running Windows 7 on one partition and Windows 8 Preview of consumption on the other, Firefox does not open for either.
  Firefox crashes when opening without error message. I reinstalled and deleted manually the profile information. If I create a new profile, it works up until I got close and try to restart I have to make a new profile.
  I tried removing/reinstalling java as well (in case), which I had been to some of the java edition of my Windows 7 partition installation.

  As I run Firefox, if I look at the Task Manager, Firefox.exe appears for a moment, but disappears almost immediately.
  No files appear in the directory "C:\Users\[Username]\AppData\Roaming\Mozilla\Firefox\Crash reports" with the exception of the file "InstallTime."

  • The information posted in the "Troubleshooting information" section below comes from the partition of Windows 8 Preview of consumer. There are errors with my display not updated correctly, driver - Firefox was working on Windows 8 Preview of consumption until recently, so I guess that it is not part of the question.

  Why not instead to downgrade a Firefox exist for earlier versions, consider trying several installs.

  Portable Firefox is designed as an easy to install using Firefox as a browser extra process.

  • He's probably still available in versions http://portableapps.com/news/2012-02-01_-_firefox_portable_3.6.26_released

  Familiar with your facility manually several versions of Firefox will be easier, simply use separate unique profiles for each version. Use the built in the Profile Manager or the standalone version to help you. These tests do not require all other partitions and must do not include changes to the firefox installs and existing profiles.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox#Using_new_profiles_in_secondary_Firefox_installations
  • http://KB.mozillazine.org/Profile_Manager
  • https://developer.Mozilla.org/en/Profile_Manager (standalone app)

• Error code 2 while installing KB2160841 latest Windows Update

  Repeatedly get an error Code 2 (Windows Update encountered an unknown error) when trying to install a part of this massive update week game - problem is specifically with KB2160841. Have tried several times over and over again after a reboot. Have also downloaded the specific update (NDP40-KB2160841 - x 64 .exe) - and when trying to install this error message "KB2160841 does not apply, or is blocked by another condition on your computer.".

  Any ideas how to solve this problem and get KB2160841 successfully installed?

  Thank you

  See: http://social.answers.microsoft.com/Forums/en/vistawu/thread/ee945c20-a8c1-4b82-9b4c-d6dfae4c5337

  Error code unusual for this particular update.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• error message on the "WindowsUpdate_800706BF" "WindowsUpdate_dt000" use Windows Vista 32-bit home computer

  does not load update message appears when you attempt to update

  Hi Roxannedan,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  (3) is limited to any Windows specific update?

  I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Step 3: Clean boot the computer and then try to install the updates

  Follow in the link below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista Stop error message: 0XC012001D after the installation of Windows updates.

  Original title: vista stop working

  Hello

  I need help on vista, because I update and restart and stop working and appear this error code:

  !! 0xc012001d! Registry\Machine\Components\DriverData...

  Hello

   

  
  1. remember the number of the update you have installed?
  2. could you give us the exact error message?
  3. Once you get this error message? Are you able to boot to the desktop?

   

  Method 1.
  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
   
  Step A.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  Step B.
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   

   

  Method 2.
  Best thing you can do is to perform a system restore just before where the problem occurred.
  I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Thus, the article above is applicable to Windows Vista.

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.