BlackBerry smartphones, I need some advice from support

Similar Questions

• BlackBerry smartphone how to remove it from my Torch 9800 policy

  I have a Torch 9800 formerly - used for emails from the company. According to our company policy, there was a COMPUTER policy that is installed on the device where would force the user to set password protecting the unit.

  Now, this device has been removed and I like using it only for regular phone calls like so no password protection. My question is:

  How to remove the it strategy of the device?

  I tried to slide the unit several times, but the policy still exists. Need help...

  Hi dontsou

  Welcome to the Forums of the BlackBerry Support

  Now, if you have this device, first make a backup of your contacts using Desktop software then first try this Knowledge Base:

  KB31291  :   How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

   

  After a reset, please note not all restore from your backup, restore only you contacts, entered in calendars, Memo, etc. Otherwise these strategies COMPUTER can be restored on that device and you must repeat these steps...

• BlackBerry smartphones, I need my blackberry 9630 to read web video and download video

  I need my blackberry 9630 to read web video and download video. Right now I can't do it right. Can anyone suggest some plug-ins etc. ?

  Hi and welcome to the forums!

  Video game web depends on the type of video file. See the link attached for supported file types.

  Can you post an example of the video link, you can not play, I'll help you test.

  Thank you

  Bifocals

  Reference guide for Media Types supported on BlackBerry Smartphones.

• Need some advice on a motion graphics/editing PC build.

  Here's the deal. I was builing custom PC of for more than 20 years, but not a system anything close to that I intend to build then and need expert advice and information about a person to her. I'm looking to build a system designed for video editing, creating motion graphics and 3D modeling, and some argue more questions about which components would be best for my needs (mainly on the graphics card and hard drives).

  
  

  The first is the card video (s). And I say 'maps' because I don't know if I need more a card for what I am trying to accomplish. I have create many long 3D animations and complex using Blender and After Effects, in addition to changing a variety of projects in creation and you want the best bang for my money. My budget for this system is quite high ($5 k and 10 k $) and I know I can get amazing at this price performance if I get the right equipment. Thus, on the cards. From what I have gathered, briefly, Google search, is that I want a card with CUDA Nvidia for video editing. My main question in this area is, would be to dual graphic cards or using SLI quad be good in what I'm doing or is SLI mainly intended for improved game performance? From what I understand, I think that (at least the video, not sure about 3D animation) is done mainly using the CPU and GPU not; Although the help of CUDA. Basically, I need to know how useful it is. If I bought two or four GTX 980 see a significant improvement in After Effects, Blender or creation? I plan to get one of the top (if not the top) i7 CPU I can find, so it won't be a bottleneck of my CPU performance, so please does anyone suggest to put the money into the CPU rather than the GPU because I already put the maximum amount here.

  
  

  My other main question is regarding hard disks (or solid state). I'm doing a bit of editing and modeling 3D on a laptop and it's getting really well for projects bit, that I have worked so far, but as I started to work on projects that have strict deadlines, I'll need a system that can make it basically as fast as possible. My main question in this area is, should I use any sort of RAID array. I looked at several forums, but none of them specifically answered the question for my unique situation. Most other forums says ' well, if you will only use it for editing and not animation "etc but I'm going to do a 3D animation as well, so I need to know what the answer is in this case instead... I also know that the other messages regarding the change of systems, to recommend the use as three discs for things like "scratch disks". I have a feeling that I'll get a few recommendations here saying I need like seven discs for what I'm trying to make, which are the answers that I really can't wait to hear about. I mainly looked at RAID 5, 6, & 10 but do not fully understand them, and have in fact never implemented in any system I've built so far. From what little I understand, I think that RAID 10 would work better for my needs, which offers a great read & write speeds which is important and also provides redundancy, which IMO is even more important. I can't have the system down for an hour, or worse a week because one of my drives breaks down. My other question in this area is a table of the SSD would greatly improve performance in a RAID 10 array? Would it be profitable? I read in a post recently that drives hard actually handle more large files better than SSDs and worried to SSD in the test bench because they would not be able to handle larger video files and I'll use it frequently as well as hard drives would be. I guess I'll be shooting and editing many 4K projects soon and need a system that will handle this resolution well. If I have to use 4 hard drives in an array of RAID 10 for my OS (the RAID for speed and redundancy), drive a small SSD for a scratch disk and a large SSD or HARD drive for a player video output, please list the exact readers/configuration that you would suggest that I use and why. I am very interested in a bit of a discussion here to get the best possible configuration for the money and will respond to all sincere responses as quickly as possible.
  

  I know I already asked several complicated issues here but am hoping someone with a little more experience that I have in building editing systems can provide some advanced tips and help me and someone else who can try to build a similar system in the future. I know also that this issue is not specifically intended for the AE, but it has to do with this and because EI is editor and motion graphic, I'm find the best advice for a system that will edit video and create animations. Thank you 1 million (in advance) to anyone who provides a contribution instructed in answer to the questions that I have!
  

  simply 2xssd raid 1 (mirror) for the OS/applications.

  1 ssd for zero/previews

  second raid 6 or 10 with the hdd or ssd for the media.   (if you don't get a lot of drives to get the speed, you will want to use ssd.)

  No raid for backups. can use several disks hard, but in combination with off-site, such as cloud backup.

  Optional could be another ssd for cache/export. If the ssd scratch fails, it would be able to support.

  can take a look at the guides of storage here for more information.  Tweakers Page

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• ID error blackBerry Smartphones: 40730 need help urgent to reset the password *.

  Hi team,

  I need help to reset the password for the BB APP world, I logged this site:- https://blackberryid.blackberry.com/bbid/main/login.seam?callbackuri=&i=4218081 this link is send me by email a password reset agin to the BB user ID which is (info personal removed) @blackberry.com is my user name. How can I get the password from there when I ask to reset the password.

  Donmenezes wrote:
  Hi guru,.
  Thank you for the answer. I followed the entire process, but none the case on all the links there is an option to send the password to reset BlackBerry ID to an external address is e-mail that is for example:-gmail account. I really need some request you please explain myself better.

  I think that you read correctly... re-read the Workaround"" section. He said nothing to do anything to your GMail account instead, you must follow the instructions, log into your BIS account (from a PC or your BB... it will be much easier to use a PC well) and activate the automatic redirection of your @bb to your Gmail account. Then return the password reset email, access your GMail account, and you should receive the email to reset it in order to finally use it to solve your problems.

  Please follow exactly the instructions and if you don't follow some sections, he cites exactly with what exactly you did and what exactly doesn't work correctly (point by point, please, with all the details). I can't explain that any better unless you are specific about exactly where/how you're stuck.

  Good luck!

• Need some advice FC...

  .. .wondering if someone can give me some advice on fiber channel.

  We are running two without: a former EMC NS20 and a new HDS. Both have CF, but only to systems meeting some, Lun most are iSCSI. We have two switches Cisco MDS 9148 for HA. We currently have a c7000 using iSCSI to one of our SAN systems, all the blades in this system are running ESX 4. I would add this c7000 CF, but I am interested in refurbed 4 Gb CF because we are more expansion of this system (we have an another c7000 using FlexFabric for newer blades).

  I've been searching online trying to figure out what that HBA and interconnection modules would be appropriate. I ran in the QLogic QMH2462 HBAs, Emulex LPe 1105 and I wonder who works more own with ESX 4 and would play well with our switches. I also met a few IC modules options: the "HP 4 GB Virtual Connect Fibre Channel Module" and the "Blade switch Cisco MDS 9124e.

  So I wonder if anyone has any advice what may work better in my configuration. And what experiences anyone could have a similar setup.

  Thank you

  -Mike

  ... QLogic QMH2462 and Emulex LPe 1105 HBA...

  IMO, you can use one of the HBA without problems. I've never had problems with QLogic or Emulex no matter if used in servers in rack or blades.

  ... the "HP 4 GB Virtual Connect Module Fibre Channel" and the "Blade switch Cisco MDS 9124e '...

  The Virtual Connect module is only an option for a C7000 with Virtual connect Ethernet IC modules. I did not work with Virtual Connect from this so far (with the exception of the HP ASE training). I mainly use the Brocade or Cisco IC. In your case, I'd probably go with the Cicso (from the perspective of management), since you already have the switches DMS 9148 in place. However, as you may know, HP and Cisco are not best friends more

  André

• Could use some advice from site made with CS5

  Dear people,

  me and my brother made this site for my business, but we could use some advice on style, to make

  much better, the concept has good potential, but to make it great, we could use some advice.

  You can consult the site: [url removed by host]

  I hope some of you can help out me

  Thanks to the front,

  Willem Molkenboer

  Web design forum might be more appropriate for you needs. It's at http://forums.adobe.com/community/design_development/webdesign.

• Need some advice on the new computer from HP.

  I bought a new HP computer and it shipped just yesterday and delivery date is Thursday (12th).  I am new to HP computers, my other 2 desktops are Dell and Toshiba laptop of my wife. Laptop is Win 7 and desktop computers are Win XP. The most recent Win XP is:

  Windows XP Professional SP3 32-bit
  Intel Core 2 CPU 6300 @ 1.86GHz
  4 GB of Ram.

  Don't laugh, my other Dell XP desktop computer is simple core!  Laughing out loud

  These 2 computers will retire after I receive and configure the HP computer:

  HP Pavilion HPE h8 desktop PC - 1360t
  Windows 7 Home Premium 64
  3rd generation Intel Core i7-3770 to processor quad-core [3.4 GHz, 8 MB of shared cache]
  10GB DDR3 1333 MHz SDRAM [3 DIMMS]
  SATA 1 TB hard drive 7200 RPM.

  Do you think I'll note and difference? (I'm kidding) Laughing out loud

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  3. the computer come with Service Pack 1 installed?

  HP Pavilion HPE h8 desktop PC - 1360t
  Win 7 x 64 ~ ~ SP1, IE11 ~ ~ FF i7 3770 3.40 GHz ~ 10 GB Ram ~ NIS 2014

  Congratulations for the excellent choice.

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  With your experience, you probably won't have a problem. I strongly support you haven't set a password on it.

  You can always add a password later.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  Configuration of the computer and do what is required to complete the user account. It is advisable to only use DVD + R media. You will probably need 3-4 DVD + R and the usual CD - R disc repair system.

  3. the computer come with Service Pack 1 installed? This date should be. There will be updates.

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• BlackBerry Smartphones trying to transfer photos from mem device bb to the pc using the bb as a storage device but impossible... Help, please

  I read the threads on this and the link that suggested a programme of assistance of the forum. I don't have a media card yet, so the pictures are just in the device memory. I plugged my pc with the USB the bb and he returns as removable disk I have in my computer and reload so I know that it is no doubt being located by my pc. However, when I click on disc of deletion I have, it says "Please insert a disc in the drive I '.»

  I then tried to follow what another user did, using the Desktop Manager and Media Manager for my photos.

  When Roxio opens and I click on 'images', I get a split screen up and down not a left to right as some users have described.

  The upper pane, called 'my media' has nothing and the message says: "this view no results."

  The lower pane, called "my devices" shows all my pictures.

  How can I get these off my bb and on my pc? Media options card I media support, encryption, no mass storage on... all as needed, even if I do not have a Cardinal media.. just in case where it did something to help, which was not.

  I need advice please. I'll be able to get a media card in the next few weeks and then I hope that things will work better.

  Thank you
  CHYN

  Take a look at this tutorial using the Media Manager: http://demos.blackberry.com/mediamanager/na/us/gen/

  At the top left, there is a menu whereby you can select 'connection and file transfer. It should be useful in showing you how to do this.

• BlackBerry Smartphones to install the Firmware from another provider?

  My operator: Rogers

  Device: 8900

  Environment: BES Express 5.0.1

  I need to install Device Software 5.0 to synchronize my public folders wireless.

  Rogers only has not the 5.0 firmware updated. However, I found it for the 8900 on Vodafone UK downloads.

  No damage in this load?

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  Some users might worry that they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Read more information on it here:
  http://www.port3101.org/power-users/296-BlackBerry-OS-upgrade-including-betas-myths-dispelled.html

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Satellite A200-1AH - need some advice for hard drive replacement

  Nice day

  I've been using a + A200-1AH + for three years. Unfortunately, I suffer from problem of free disk space. So, I decided to replace my drive with a new one.

  How can I know the HDD I buy will be suitable for my laptop?

  Can you please tell me what era the + key-points + I need to know when buying a new hard drive for my laptop?

  Post edited by: alicozgo

  I changed the subject, because it was so dumb. Why would I ask 'what hard drive buy' in a Toshiba forum :) what a forum administration...

  Hello

  Satellite A200 is a more recent series of laptops. This series of laptop use and support the SATA HDD controller and this means that you need a SATA HDD!

  The laptop runs the 2.5 hard drives. The speed of the HARD drive is not very important for compatibility so that you can choose 4200 RPM or other

  In addition the SATA controller has no limitation in size so THEORETICALLY, you should be able to use hard drives with 320 GB or more
  But in some cases rare BIOS would not be able to manage some HARD drive sizes, but this generally isn't the case

• Send with blackBerry Smartphones, how to retrieve data from blackberry?

  Hi, I need to send an email to blackberry and on the user's response, I need to store this data in the database. Can u please help me in this regard. How to send email from web browser, and then retrieve the data in a database.

  khushi289 wrote:
  OK ya... We use Tomact 6. How do you after that

  It is a forum oriented BlackBerry technology, you have questions about web development. I think it's best for you is to find some tutorials on the internet on "how to create a web application on tomcat with a database" or try a forum oriented Tomcat directly.

• BlackBerry Smartphones you need to transfer all my contacts in my address book Outlook 2007 on my BB?

  I'm sure that this information is displayed no doubt somewhere in these forums, but Ive tried different 5-6 research and can't find what I need to know, so thought I would try a post.

  I want only to transfer some of the contacts in my address book Outlook 2007 on my BB and keep these contacts through each synchronization (don't want to sync and have all appear).  Can someone tell me how to proceed?

  Assistance or management, you can give me is appreciated! Thank you!

  In Outlook, create a new folder in your contacts, name it anything you want and MOVE in this folder of contacts from Outlook, you do not want to synchronize to the BlackBerry.