Error network adapter

Similar Questions

• 10 windows and error network adapter need to install my network card

  A week or two after the installation of Windows 10, my PC started to operate erratically while giving me several different error messages. Finally, I realized there was a problem with the network card. After I re-installed each time my frustration forced me to go back to Windows 7, which has worked very well since. But I still have a message on my machine that I need to install my network card. (When I try, I always get the message that "the solution can be downloaded at this time.") I would go to Windows 10 but do not want to encounter the same problem. Someone has an answer to what is the problem?

  Hello

  Thanks for posting your query on the Microsoft Community.

  We regret the inconvenience caused to you. We will be happy to help you with your problem.

  This problem may be due to outdated or corrupt drivers.

  I suggest to install the latest drivers from the manufacturer's Web site network and install it on your system. Then, go to the following link and follow all the steps before you upgrade to Windows 10 once again:

  How to: 10 tips before installing the latest version 10 of Windows 

  Let us know the status of the issue. We will be happy to help you further.

  Thank you.

• State errors network adapter interface increasing (ifconfig) on Linux/CentOS 5 OS guest

  We found that the RX errors continue to increase so that check the status of the NIC via ifconfig, located on Linux guest on ESXi3.5/4, no matter whether he uses it or not link:

  bond0 Link encap HWaddr 00: 0C: 29:B0:B6:11

  INET addr:10.1.50.11 Bcast:10.1.50.255 mask: 255.255.255.0

  ADR inet6: fe80::20c:29ff:feb0:b611 / 64 Scope: link

  BROADCAST currently RUNNING MASTER MULTICAST MTU:1500 metric: 1

  Packages: 1075980 RX errors: 308 dropped: 597 overruns: 0 frame: 0

  Dropped packets: 491505 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 1078732023 (1,0 GiB) TX bytes: 486309796 (463,7 MiB)

  It doesn't occur on the same OS vmwared on another Linux through vmware server 2.0. The ESXi3.5 is installed on the IBM 3550 with two network adapters.

  Anyone filled a similar question before? all advice is appreciated.

  You can use the configure script to configure if you load a new kernel.  Other that that, you shouldn't change it again.  The tools will install the network improved module, and from there, no other management staff is really necessary, until you upgrade your kernel.  When you do this, you will need to restart the installation script to load the modules in the new kernel.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• HP 802. 11b / g wireless network adapter driver is not compatible windows 8

  I have a HP Pavilion P7-1054 and my RealtecNetwork adapter does not work after installation of window 8, 64-bit.  Have an error "network adapter is not available.

  Well, I think I got the LAN adaptors to work.  That I did use the HP System Recovery and load Windows 8, to my surprise, as I thought it was Windows 7 system in the computer.  Because it just to load the system and not the Applications when I checked this morning I had Internet and Email.  So I think that what has happened is the Internet of ESet security has done will not stop and this has prevented the loading of drivers.  So I thank you for your help, all right.  Now to learn a new operating system.

• I had a the network adapter could not establish the connection...

  Hi guys,.
  I just downloaded and installed oracle 10g express in my installation of win 7.
  
  I have already created 2 tables and a single user and everything seems to be ok.
  
  but... There is a but! I tried to connect (using the ojdbc14 driver) NetBeans and I got an error "network adapter could not establish the connection.
  
  the connection string is:
  
  JDBC:Oracle:thin:@PCs:1251:XE
  
  (pcs is the name of my pc).
  
  This problem can be?
  
  Thanks much ;)

  Yep, that's what I told you, I tried with "xe" instead of "XE", but I still get the same error...

  What is the second mistake is the line you posted?

  Carefully COMPARE your line to mine

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up.

  cable not connected network adapter

  I have norton antivirus online via my ISP and I had to disable, because it comes with an error that says "cable not connected or missing network adapter" I use dial-up and do not use any type of router and I'm not on a network. I also tried to disable my network card & it still says the same error. I have an internal network card that came w / the computer (NOT a PCI one) and I wonder if there is a cord or a plug inside my computer that must be plugged. I made some changes on the internal hardware and might have missed an and I didn't have to open my Tower if it wasn't. It's a big hassle! Help, please!

  Hello

  1. Once you get the error message?

  2. do you get the error when you try to disable Norton anti-virus?

  3. are you able to access the Internet explore?

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• No network adapter found error message.

  After installing the latest updates, I have to restore to an earlier date due to the error 'no found network card '.  After doing this several days, I found that the recommended update KB2913431 is the problem.  I tried all the other tips given to others.  I don't work on IE but use Google chrome.  I am using Window 7 Professional.

  Hello

  Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-CA/Windows/fix-network-adapter-problems#1TC=Windows-7

  Answer please if you have any questions.

• Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

  Hello

  Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

  And if I "try access the Cloud Console ASM instances will fail with this error:"

  IO error: the network adapter could not establish the connection

  The connection descriptor has been

  (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

  (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

  My env is:

  Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

  Someone knows how to solve this problem?

  Thank you very much!

  Arturo

  (1) what is the user id you are using OEM fior?

  The user id should have Sysdba and should not be in the role SYSASM.

  (2) in order to check your port

  In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

  Summary of endpoints listening...

  (Check that the PORT and IP information is correct)

  Instance '+ ASM1' READY State, has 1 operation for this service...

  (3) in addition, connect to asm and check the connection

  Show u local_listener and entered into OEM parameter details are correct.

  (4) OEM, I think you add Cluster_ASM.

  Oracle_home_path--> you're grid House

  username--> with sysdbarole

  --> Sysdba role

  Cluster_name--> $GRID_HOME/bin/cemutlo - n

  Service name--> + ASM

  ADD

  NAME: INSTANCENAME

  -Home: HOST1

  listener_HOST-->< show="" parameter="" local_listener=""> exit

  PORT-->

  SID- + ASM1

  Concerning

  Krishnan

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Wireless network adapter give messege error HELP ASAP!

  When I try to connect to the network wirelessly around me, it gives me the following message: "the ability of your network adapter does not match the requirments of this network". What should I do I have Windows 7 Enterprise and my network adapter's: D-Link DWL-G510 high speed 2.4 GHz 802.11 g PCI Wireless Network Adapter.What should I do how can I solve the problem please HELP ASAP! Thanks PSI HAD NO PROBLEMS USING the ADAPTER IN WINDOWS XP IT WOULD CONNECT to all THE NETWORKS BUT IN WINDOWS 7 IS THE PROBLEM!

  Have you checked under the adapters advanced properties wireless?

  The network and sharing Center, click on change settings card, right click on wireless network connection and then go to properties. In the Properties window, click on the button set up and pull the top of the Advanced tab.

  You should get options here to set the mode (a, b, g) among others.

  You know the settings of the wireless network you want to join?

• My wireless on my laptop network card has stopped working. Error: problem with access point or network adapter.

  The message bed "problem with the network adapter or access point.  Is there anyway to solve this because convenience store could not.

  Hello

  1 did you change on your computer before this problem?

  2. What is the brand and model of your computer?

  Follow the suggestions and see if it helps.

  Method 1

  You can follow the procedure in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2

  Check to see if the problem exists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  See also:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir