10 windows and error network adapter need to install my network card

Similar Questions

• C460 - Windows 10 - no network card

  I have upgraded to Windows 10 and my network card was not recognized. It is there, but in mode 'deep sleep', power state = D3.

  I tried everything to get out of this State... new drivers, reset the motherboard, etc... I went out and bought a USB wireless adapter, and it went in the same State.

  I downgraded to 8.1, and network card started working again.

  I thought it's maybe a BIOS problem, but it was turned on it, and I see no updates available for the C460 BIOS.

  What I'll do next, is uncheck the option to enter the State of low power on the wireless card, then repeat the update of Windows 10...

  Anyone see this before?

  Thanks, I tried all of this. What worked was to go down to 8.1, uncheck the capacity of the card go to low power... then re-upgrade to win 10.

• Exit code 7 and error 1603 when trying to install acrobat pro DC.

  Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

  Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

• Is it legal to download windows and use my product key to install it?

  Is it legal to download windows and use my product key to install it. I found a Windows Vista Home Premium SP1 and downloaded so I can install it. on my computer, I have the key, but no CD.

  Vista is now at the SP2 level.

  No public download free "legal" of any MS OS does exist, with the exception of trial versions.

  Anything you download from a public site carries the risk of associated malware that can be hidden in the facility and is to be avoided like the plague, it may turn out be a carrier.

• I have a compaq presario cq57 notebook pc and my wireless is not solving the problems of work said that the access point and wireless network card works I need help to fix this please

  the internet works only with the ethernet cable and not wireless. I have service with comcast.

  Hi, Antonia.
  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. do you get an error message?
  2. don't you make changes to the computer before the show?
   
  Here are some ways you can follow to resolve the problem:
   
  Method 1:
  Check out the link and follow the steps in the article:
  Troubleshooting your wireless network and Internet access (Windows 7)
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02543015#n55

   

  Method 2:

  Reference:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Hope this solves the problem

• Update_dt000 Windows and error code oX80072efe

  Seven days ago (15/11/2010), I am unable to check the updates of Windows. I get the following message: Windows Update_dt000 and error code 80072efe. I can't update the my virus definitions, malware and software Microsoft Essentials spies either. I scanned my computer with Microsoft Security Essentials and McAfee, and no viruses or malware were detected. * I downloaded manually the latest definitions to Microsoft Security on 11/22/2010. Even after the last definitions of installation, I was unable to automatically check for updates. Help, please!

  Hello

  A rootkit has been known to cause this problem.

  TDsskiller (Rootkit removal tool)
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Then, restart and check the updates.

  To search for other malware use this scanner:

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ==================================================================

  If necessary:

  Run 1 SFC

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  ------------------------------------------------------

  Try this: (it is Advanced B method in the Article below)

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  At the prompt, type or copy and paste:

  netsh winhttp reset proxy

  (Press enter)

  See if the update works now.

  --------------

  Then check out this article:

  You may experience some temporary connection errors when you use Windows Update or Microsoft
  Update to install updates<-- check this="">
  http://support.Microsoft.com/kb/836941

  Do these two and try updates

  Description of the update tool of the system for Windows Vista, Windows Server 2008, for Windows
  Server 2008 R2 Release Candidate for Windows 7 Release Candidate
  http://support.Microsoft.com/kb/947821/

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  =============================================

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows update error 8000b 0100 need help serious

  I have a x83vb from asus with WinVista SP1 64-bit and every time I have try to launch an update that it gives me Windows update error 8000b 0100 and ive tried system, Ive update readiness tool used the fixit now normal and aggressive, ive run manual updates, ive used CMD promt to register the .dll files unsigned , ive tride performs updates without the firewall, and ive tride reinstallation of windows and make back to updates previous it is gettig really boring especialy because I can't even upgrade to vista Sp2 can someone help me please

  Hi Markuskain,

  Without the logs that TaurArian asked at the base only troubleshooting steps that we might suggest would be these two:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  http://support.Microsoft.com/kb/971058 (make sure of course when running this tool, you run it in aggressive mode)

• Fax for Windows and error analysis

  I have a document ready to be sent by fax.  I have my fax through Fax Server Setup.  This is an error indicating that no account no has been implemented in Windows Fax and Scan accounts, even if there is.  I go ahead and close the error window and it allows me to continue to do the outgoing faxes.  I have check the fax was sent and it was very good.  How can I make the application aware there is a configuration of accounts with the fax server, and not the error have developed each time?  I tried to delete this account and re - enter, which did not work.  I am running Windows Vista 32-bit.

  Salvation FOR you,

  ·         Have you made changes on the laptop before this problem?

  ·         What is the exact error message?

  Follow the steps in the article and see if it helps to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems

  Reference: http://windows.microsoft.com/en-US/windows-vista/Faxing-frequently-asked-questions

• Computer saying non-genuine windows, and validation of the needs

  I bought my computer from PC World in 2008 with Windows Vista Home Premium installed. After four years, it is not authentic saying of Windows and requires validation. Unfortunately, the label on the bottom of my computer is unreadable and I don't have the box in which I bought it so did not not the Validation Code of the product. I recently had the computer repaired in a store of the local computer. This could be the reason for the message?

  Thanks for any help you can give me.

  Your problem is that, for some reason, the system is unable to properly read the table SLIC in BIOS, what is required in order to triggered the key OEM_SLP with which the computer came installed.

  The normal solution is to change the key for that on your COA sticker - but you say that you are unable to read the key here.

  In such circumstances, are the only things you can do

  (1) Re-create the license store - in which case it's a minor software problem causing the is

  2) try to update BIOS to the latest available Vista compatible one, since the manufacturer's website

  (3) contact the manufacturer and see if they can provide assistance to correct the SLIC table

  (4) a reformat and reinstall using the manufacturer's recovery media

  (5) purchase of a new license for Windows (or a new computer)

  Since it is a 'new' installation, the problem is obviously not #1

  #2 is a possibility--but a rare

  #3 is a possibility and worth a try (but can cost $$)

  #4 you seem to have already tried.

  #5 is the option of last resort. (it costs money!)

  It * may * be an alternative solution, if you are patient and persistent.

  Attempt to activate by phone and speak to an operator - they will tell you that your current key is locked (they then seek confirmation of your product key). Explain your problem, you must change the key of your sticker, but the thumbnail is unreadable (they could please provide a replacement key?). If all goes well, they will request documentary proof of the sticker, in the form of an e-mail with a picture of the affected tile - and you can proceed from there.

  It sometimes takes two or three calls before you get an operator who knows and uses this procedure, but I know that it is possible and happens.

• Windows Installer error when you try to install iTunes

  I am trying to install iTunes 9.1 and get a windows installer error.

  Hello joannem1,

  What is the exact error you get when you try to install iTunes on your Windows Vista computer?
  Is your computer 32-bit or 64-bit?

  Read the next article Apple support for the installation of iTunes:
  http://support.Apple.com/kb/HT1926

  The solution includes:
  -delete temporary files
  -remove the old installation of iTunes and Quicktime
  -clean the old installation by using the Windows Installer Cleanup Utility files
  -Download and install the latest version of iTunes

  Please respond and let us know if this resolution contributes to your question or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows cannot find network card until I reboot

  Hello

  I noticed a few threads that are similar to my problem, but I have a recurring problem that is boring and not too disruptive. Everytime I turn on my computer Dell Inspiron desktop for the first time, every day, windows is unable to locate a network card is installed correctly.  When I check in the network device manager, there is nothing available. I then restart my machine, and then windows (64-bit 7) finds the suitable network and connect to my router etc, and all is well. When I check the Device Manager after the reboot, I see under network: Broadcom Netlink (TM) Gigabit Internet.  When I click on this and try to update the driver, reports of windows that it is up-to-date!
  So, my problem happens whenever I start my computer, but never when I restart!
  Any suggestions? As I don't want to start and restart my machine every day of her life!
  Thank you very much
  Mick

  I suspect a hardware problem with the adapter.

  You can try to uninstall the card in the Device Manager and then reboot and let Windows reinstall.

• Windows 7 - Error Codes: 643 & dt000 (cannot install the Office updates)

  security updates for Windows 7 and MS Office 2003 fail to install

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Fix with difficulty WU Utility http://bit.ly/a49XCo Windows updates

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Update of Windows Vista, but Windows Live Platform says I need to install the platform update. How can I reinstall this update of the platform?

  Windows Live Mail installation

  I have vista service pack 2 installed and windows vista update also installed platform but windows live is to say that I need to install the platform update. How can I reinstall this update of the platform.

  Windows Live Mail questions belong here: http://windowslivehelp.com/product.aspx?productid=15

• Windows 8 wireless network card problem

  Hello

  I have problems with my wireless adapter (Atheros AR5b93-already updated to the latest version of the driver). Often some time after I watch videos (offline). There will be delays in the video, and then all of a sudden the wireless network disconnects and shuts off even when my Acer wireless button is showing its active (orange led is lit). Usually I click on troubleshoot and it gives the network card and all goes well for a while then it happens again unless I close the video. Sometimes the adapter will be hidden and it will say my hardware is not found (CODE 12). What is going on?

  I have made yet. I made a few adjustments. I went to the network & sharing Center > change adapter settings > change the wifi settings and I have checked this box (LLDP Microsoft protocol pilot) and disabled my ethernet (I used never she and doubt if I ever will be) well. Hope this solves. Blue microwave THX! Will follow your advice if it does not work

• 10G and switch network cards virtual configs

  It will move in a new data center that has a capacity of 10G up to the switches in the baskets.  In our current environment of 1 G, we have seven network cables (6 for ESX) and 1 for the remote management of the server.  If we move to 10G we could cut the cables up to two for ESX and remote management.

  Our current Setup uses a vSwitch for the console, another vSwitch VMotion and private traffic and a third for public traffic.  Each of the three vSwitches has two network adapters physical, assigned to the redundancy.

  If we go with NIC 10 G in the new data center then of course we have only a single virtual switch with two network cards in 10G for redundancy.  I wouldn't have the isolation we have currently with three virtual switches, but given that we're going to use VLAN exclusively in the new data center I don't see a problem.

  Any thoughts on the advantages or disadvantages?  Of course, we will follow the HCL to select a network adapter. 10G compatible

  I think that the reason why many customers today use more than 2 x Gigabit connections is mainly for reasons of security rather than the problems of bandwidth (FT could introduce a little challenge and you could use the same pair or a dedicated third party adapter if you are really concerned for VMotion).

  I wrote about this concept a little back: http://it20.info/blogs/main/archive/2007/10/30/75.aspx

  This hour IB seemed to be the best placed to do this today I think there is a consensus that it's the way things are going to be built... but using 10 Gbit (harmonised rules ethernet - which also includes storage traffic).

  Back to your point I don't think that, in General, a simple increase in bandwidth will solve magically all the segmentation/security concernd that led us to dispose of separate network cards of 6-8-10-22. VLAN / exchanges have been around for a long time and their implementation (or lack of theorof) on the host ESX has been achieved through physical segmentation rather than raw bandwidth concerns. This may be different for you (good for you).

  This will change with Enhanced segmentation/QoS features added to Ethernet protocol to join this converged network that talks about Cisco.

  My 0.0002 cents.

  Massimo.