ERROR: no boot disk was detected or the disc has failrd

Similar Questions

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.

• Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

  Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

  Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

  Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

• Error No. Boot Disk was detected or the drive failed - h8-1020 Desktop

  1 hp pavilion HPE h8-1020

  2. windows 7 64 bit

  3. Realtek PCIe GBE Family Controller series v2.38 24/12/10

  Error: No boot disk was detected or the drive failed.

  4. no changes to the system.

  After I restarted my computer about 7 times it finally started, so for me to be able to write this message.  However, this problem occurred several times over the last week or two. I get a blue screen, then the computer goes into a splash screen and I get the above error.  Of course, I'm 2 months past my warranty period, so I'm here, GROUND.

  Is my hard drive on its way? Is there a possible difficulty for this seizure completely breaks down?  Information to help save my machine would be great and much appreciated.  Thank you!

  P.S. I ran a diagnostic and all past test except the bootable disc.  But for some reason when I restart a little more time it get passed my system and begins running.

  Note: I created recovery discs and I backed up all my files.

  Hello:

  In my view, there is nothing you can do to repair the drive except to replace it.

  You can run the checkdisk utility and check both boxes.

  Please see the link below for more information.

  http://www.w7forums.com/use-chkdsk-check-disk-t448.html

  Please understand that this will only delay the inevitable at best.

  Paul

• Error: no boot disk was detected or the drive failed.

  I turned off my computer last night and when I turned it back today I got an error "not detected no floppy or defective disc.  The computer is a desktop computer of Pavilion P7-1011 that running Windows 7 Home Premium 64-bit.

  Is there a way to fix this, or that I lost everything on my computer?  I had the computer since March 30, 2012

  I recommend that you start your PC and go into BIOS then select Diagnostics F2 and run the hard drive diagnostics test.

  

• ENVY h8 - 1520t: error: no boot disk was detected or drive failed.

  Yesterday, when I turned on my computer, it was really slow and I could not open any programs. Then it went all blue and white. When I rebooted, I see "control the presence of .media, media, start the PC via ipv6, then error: no boot disk was detected or the disc has failed." I tried to hit f11, but it fills the entire screen with the error message. He died or hope?

  Looks like your hard drive has failed.

  You need to maybe replace the disk and reinstall Windows.

  Please use these instructions to test your hard drive.

  * Works even if your PC will not boot to Windows.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb. If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• 23 - k027c: ERROR: no boot disk was detected or drive failed

  Hello!

  My computer

  HP Envy tilt 23-k027c TouchSmart all-in-One desktop PC (energy star)

  These latest OS Windows 10 (update of Windows 8, which was preinstalled on the computer at the time of the purchase in December 2013)

  Intel (r) Core (TM) 15-457OT CPU @ 2.90 GHz

  Processor speed 2900 MHz

  A few days ago it started showing blue screens of death with a PAGE_FAULT_in_NONPAGED_AREA note all other hours, or sometimes 3 times per hour.

  I went through all the troubleshooting process, finished with a bluescreen debugging possible analysis demonstrating that the ntoscrnl.exe driver might cause the blue screen issue.  And on the morning of the next day my computer greated me with a black screen with an ERROR: no boot disk was detected or drive failed.

  I can still get into the BIOS by pressing ESC at the present time of HP sign appear early attempts to restart.

  BIOS indicates that the hard disk is detected (yay!), so it is not the source of the problem.

  Memory and disk test went well passed, PASSED tests successfully.

  Pushing ' restore the original and exit "in the bios does not help.

  Nothing else works. Only these two ESC and F10 keys.

  How can I fix the system?

  I don't have a HP with PC Restore disc when I bought it. Site Web of HP didn't kits of restoration for the moment.

  What to do?

  SOS help, please!

  It is the computer that I use for work and personal use. There are gigabytes of photos of my family, as well, who desperately, I don't want to lose...

  I'll be super thankful for all reasonable advice and direct instructions!

  The ' ERROR: no boot disk was detected or drive failed. "  May be a simple solution to redo the botmanager file.  This normally requires a bootable DVD with the repair function or a USD bootable with windows and repair function.  Windows 10 is installed, this would be my choice getting either the drive or the USB key.  HERE IS THE MEDIA tool of M$.  Make the work of another PC, DVD or USB and then - on PC - start problem that media and choose repair when loading of the POPup screen.  DO NOT install.  If you install it, it will eliminate your data.

  BTW: 10 Windows is installed, the HP recovery disk will return the PC to Windows 8.

• HP Pavilion TouchSmart 23-f202: no boot disk was detected or the drive failed

  On startup, I get the message "no boot disk was detected or the drive failed.

  I bought a new H/D, installed and at startup I get the same message that I got on the old H/D.

  As there was no disc provided with the computer when I bought what I'm doing, had to do to get this sucker to the top and work?

  Hi @Jimmy56,

  Welcome to the Forums of HP Support! I understand that you had a type "no boot drive has been detected" error at startup to the top, and you have replaced the hard drive and have the same problem. I'm happy to help you with this.

  If replace you the original hard disk, you can use the following to test the hard drive. It is possible, there was a connectivity issue and just re-allocation of places the hard drive could make a difference. Computers HP - display of error HDD before starting the computer

  The most recent hard disk you put in, if not there was no operating system installed, you'll get the same type of message. You could make the same diagnosis of HDD from the link above, just to make sure that the disc is good.

  Please let me know the results, but so just install the original in the system hard disk works, and it starts correctly, so please mark this message as a solution. Bravo would be appreciated as well.

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• error: no boot disk was detected...

  I have a hp pavilion 23 all of a. Message from the above subject line. I tried Windows + b + power switch. Power off, but do not restart. Computer is less than a year. Help, please!

  Sorry to hear about your problem with your needhelp0000 of Pavilion,

  I will do my best to offer your help. One of the first things to do is to make sure that the hard drive is connected and operational. To do this, you will need to check the drive when you start your computer. If you know how to get your Start menu, do. often, it is urgent or remove, F10, or (in my case) escape. Try first escape. You should get a blue screen that has many options. You want the one that says the System Diagnostics. You must enter in the hardware of PC HP Diagnostics UEFI. Click the component Tests, then click on disk, then click extended Test, then click on run once. If you receive errors from that, your hard drive is likely bad, and since it was less thn a year, the guarantee must cover a new. If it passes, then the chances are high that potentially malware/virus etc. erased windows or modified your system reserved on the disk partition, and you will need to use recovery media to try to recover. I got this error but my recovery media could do nothing, and HP has yet changed my HARD drive and my motherboard.

  Good luck!

• Whenever I try to send a fax, I get error "no dial tone was detected. The telephone line is busy or not connected to the computer. »

  Whenever I try to send a fax, I get: "no dial tone was detected. The telephone line is busy or not connected to the computer. "Any ideas?

  You can't send a FAX via a connection to broadband. Fax is essentially specialized phones and requires that a service composition is used at BOTH ends.

  You can buy an analogue Fax/modem (USB types work well enough) or use a service to convert fax email...

• A fatal bus error was detected on the function of the peripheral bus component 0 7 0

  Hi all

  I'm trying to diagnose a hardware problem with my Dell PowerEdge R410. The problem occurred after a kernel patch and reboot linux security (I'm under Ubuntu 14.04 and I'm on Linux 3.13.0 - 100-generic). Initially, the machine would crash when starting in the BONE, but I managed to do always start too.

  I see the following errors:

  --------------------------------------------------

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on the function of the peripheral bus component 0 7 0.

  Severity: critical
  Date and time: Saturday 22 Oct 05:50:30 2016
  Description: A fatal bus error was detected on an element at location 1.

  ----------------------------------------------------

  I'm having a hard time figuring what component, it exactly. Here is the result of lspci:

  ------------------------------------------------------------------------------------------------

  00:00.0 Host bridge: Intel Corporation 5500 IO Hub port ESI (rev 13)
  00:01.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 1 (rev 13)
  00:03.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 3 (rev 13)
  00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 i/o Hub PCI Express Root Port 7 (rev 13)
  00:14.0 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub System Management records (rev 13)
  00:14.1 PIC: Intel Corporation 7500/5520/5500 / X 58 i/o Hub GPIO and Notepad records (rev 13)
  00:14.2 PIC: Intel Corporation 7500/5520/5500 / X 58 control status of e / Hub and RAS records (rev 13)
  00:1 a. 0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
  00:1 a. 1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
  00:1 a. 7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #2
  00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
  00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
  00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
  00:1d.3 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
  00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 family) USB2 EHCI Controller #1
  00:1E.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
  00:1F.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
  00:1F.2 IDE interface: Intel Corporation 82801JI port (ICH10 Family) SATA IDE Controller #1 4
  00:1F.5 IDE interface: Intel Corporation 82801JI port (ICH10 family) SATA IDE Controller #2 2
  01: 00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  01:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
  Serial Attached SCSI 03:00.0 controller: LSI Logic / Symbios Logic SAS2008 PCI - Express Fusion - MPT SAS-2 [Falcon] (rev 03)
  04:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)
  Fe: 00.0 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture generic Non-core records (rev 02)
  Fe: 00.1 Host bridge: Intel Corporation Xeon 5600 Series QuickPath Architecture system address Decoder (rev 02)
  Fe: 02,0 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 0 (rev 02)
  Fe: 02.1 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 0 (rev 02)
  Fe: 02.2 Host bridge: Intel Corporation Xeon 5600 Series Mirror Port link 0 (rev 02)
  Fe: 02.3 Host bridge: Intel Corporation Xeon 5600 Series mirror Port link 1 (rev 02)
  Fe: 02.4 Host bridge: Intel Corporation Xeon 5600 Series QPI Link 1 (rev 02)
  Fe: 02.5 Host bridge: Intel Corporation Xeon 5600 Series physical QPI 1 (rev 02)
  Fe: 03.0 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers (rev 02)
  Fe: 03.1 Host bridge: Intel Corporation Xeon 5600 Series Memory Controller target address decoder built-in (rev 02)
  Fe: 03.2 Host bridge: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers (rev 02)
  Fe: 03.4 Host bridge: Intel Corporation Xeon 5600 Series integrated Memory Controller Test Registers (rev 02)
  Fe: 04.0 Host bridge: Intel Corporation Xeon 5600 Series memory controller channel 0 control integrated (rev 02)
  Fe: 04.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 0 address memory (rev 02)
  Fe: 04.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller 0 (rev 02) grade channel
  Fe: 04.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 0 control thermal (rev 02)
  Fe: 05.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 controls memory (rev 02)
  Fe: 05.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 1 (rev 02) memory address
  Fe: 05.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 row (rev 02)
  Fe: 05.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 1 control thermal (rev 02)
  Fe: 06.0 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 controls memory (rev 02)
  Fe: 06.1 Host bridge: Intel Corporation Xeon 5600 Series integrated controller channel 2 (rev 02) memory address
  Fe: 06.2 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 rank (rev 02)
  Fe: 06.3 Host bridge: Intel Corporation Xeon 5600 Series integrated memory controller channel 2 controls thermal (rev 02)

  ------------------------------------------------------------------------------------------------

  So, one of the components seems to be "00:07.0 PCI bridge: Intel Corporation 5520/5500 / X 58 hub of e/s PCI Express Root Port 7 (rev 13)", but I'm not clear as to what this component is
  and what it connects too. Crack, "a fatal bus was detected on an element at location 1." seems too vague. What is slot 1 in this case?

  My questions are:

  What components apply to critical errors?

  I have to do things in the following order:

  -Unplug the power cord and hold it for 20 seconds
  -Firmware updates
  -Try reinstalling components
  -Replace parts

  PS. I'm no longer under warranty

  Thank you

  Dave

  Hello

  Location 1 must reference slot PCie 1. It is very likely the slot in which the PERC controller is. Your order of troubleshooting is correct. If it's the only occurrence, resettlement and the firmware update are probably enough.

• What should I do now? I have a boot failure of the disk (insert system disk). I inserted the disc and it says:

  Compaq sr5127cl vista 32 bit boot disk failure, insert system disk

  I inserted the disc system and got "No drive found" upwards cannot continue

  What should I do now?

  Datsuny wrote: Compaq sr5127cl vista 32 bit boot disk failure, insert system disk I inserted the disc system and got "no drive found" set up will continue what should I do now?

  Hello Datsuny, many times this error means that the hard drive has failed or the operating system on the hard disk is damaged.

  I would tend to think that the hard drive has failed.

• An error occurred while Windows was working with the Control Panel file C:\WINDOWS\system32\ALSNDMGR. CPL.

  Title:C:\Windows\System32\ALSNDMGR. Original CPL.

  Running Windows XP PRO this message "an error occurred while Windows was working with the Control Panel file.

  C:\WINDOWS\system32\ALSNDMGR.cpl.

  Can I re-enstall or the download file?

  Hello

   

   

  1. Once you get the error message?

  2. What is the card its installed on the computer? E.g. Realtek

  3. do you have a cleaning registry registry booster software installed on the computer or third party?

  4. are you able to play sounds on the computer?

  5. have you done any software or hardware changes on your computer before this problem?

   

  Alsndmgr.cpl made reference to the Manager his control panel Realtek Semiconductor AC97 file.

   

  If you have the card Realtek sound on your computer, try the following steps

   

  Method 1:

   

   

  If you have your CD of the sound card, I suggest to uninstall the card drivers sound sound card support applications and reinstall them.

  Reference:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

   

  See also:

  http://support.Microsoft.com/kb/307895

  Method 2:

   

  You can still download the drivers from the Realtek or the sound card manufacturer's Web site.

  http://www.Realtek.com.tw/

   

   

  Hope the information is useful.

  Thank you for the help, I downloaded the 97 Realteck PGM. He cured the issue.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps