Error of Driver GPIB-USB-HS - 10 possibly after Feb Windows Update Windows

Similar Questions

• Error installing driver of USB mouse.

  I get the following error when you try to install a USB mouse driver: "the i/o operation has been abandoned due to a thread exit or an application request."

  I just plug in the mouse and when it starts to install the driver I get the error.

  I tried different mice of different brands (who has worked on other computers), so I don't think it's a problem with the driver...

  Hello

  You can configure the computer to clean the start State and check if the third party application is in conflict with the installation process. To configure your computer to clean boot follow the link below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: When you are finished troubleshooting, follow the last step in section to start on normal startup.

  Hope that information was useful

• HP ENVY 15 Notebook PC: Intel HD 4600 graphics driver has stopped responding and recovered after upgrade Windows 10 1511

  16/11/2015 Microsoft installed automatically 'upgrade of 1511' on my Windows laptop, 10.

  (This laptop has been previously successfully upgraded to window 8.1 for Windows 10 in August.)

  After the upgrade of 1511, I started to receive the following error while playing at Microsoft games:

  "Display driver stopped responding and has recovered - Display driver Intel HD Graphics driver for Windows 8 (R) stopped responding and has recovered."

  According to Device Manager, installed upgrading driver 10.18.15.4256 dated dated 15/07/2015.  I did a restore to 10.18.15.4248 as dated 29/06/2015.  This has not solved the problem.

  I checked HP Support Assistant and apply labeled sp72370 10.18.15.4248 Rev c dated 05/08/2015.  This has not solved the problem.

  I am committed service HP Smart friend and they are reapplied 10.18.15.4248 via Device Manager web search pilot.  It has installed Intel Driver Update Utility 2.2, but the newer driver has not been installed because of "driver installed by manfacturer (HP).

  HP support person recommended restore new to restore point before Microsoft «upgrade» 1511   I was not comfortable doing so, as 'upgrade' was an important update from Microsoft by using the same process as the initial migration of Windows 8.1 to Windows 10.  The customer can no longer control the timing of updates and upgrades are cumulative - is no longer able to choose specific updates.

  For now I'm wrong to live with this error condition, as seems to have an impact on games and not other normal operations.  My laptop there one provided by HP NVIDIA Geforce GT 740 M, which is Windows compliant 10 and seems to operate normally.  Some of my apps choose the Intel driver, and others choose the NVIDIA driver.  I don't know how applications choose which one to use.

  What a problem like this to be resolved when Microsoft control completely the update mechanism and HP doesn't seem to update drivers available via the HP Support on a basis common?

  I've disabled the Intel HD graphics driver and used the NVIDIA graphics driver for the game.  No problem.

  Disabling the driver Intel resulted in the reving fan at a higher speed intermittently.

  Support for HP Smart friend assured me that the behavior of higher fan speed would not result in problems with premature failure on the road.  You agree?

  They said that my choice was to keep the disabled Intel HD graphics driver and use the NVIDIA only, or living the problem until HP one releases pilot newest Intel - it affects only game, all other functions seem normal.

• Driver missing for "Base system device" after installing Windows 7 on laptop dv6-2170ee

  Hello

  IV ' e got 3 device drivers missing in my laptop Pavilion dv6-2170ee base system.

  Here are the details of the missing drivers

  1 PCI bus 4, device 0, function 1

  2 PCI bus 4, device 0, function 3

  3 PCI bus 4, device 0, function 4

  Any help on the function or where I can find these drivers would be appreciated muchly.

  See you soon.

  Please download and install the JMicron card reader driver for the page of Entertainment Notebook PC drivers HP Pavilion dv6-2170ee.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• No USB ports no drivers after reinstalling windows

  Had to re - install windows due to some problems ransomware.  Everything went fine except for the left usb ports drivers, and sm bus controller.  I searched on the HP site for the drivers, but none can be found.  On the right side usb ports are working fine but not the left.  When we look in the Device Manager, they lack drivers.  I tried everything I can think of to solve the problem without success.  Any help would be appreciated.  Thank you

  The machine is

  HP Pavilion dv7-6b57nr

  Hello:

  You must install the drivers for the AMD chipset from the link below that will install the smbus controller and usb controllers 3.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Driver missing for "Base system device" after installing Windows 7 on laptop DV4-1432tx

  
  

  Hello:

  This should be (base system device) card reader driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75333-1&LC=en&DLC=en&CC=US&OS=4063&Product=4021961&sw_lang=

  Bluetooth, I don't know. Do you have any Bluetooth devices connected to your laptop?

  Maybe this article will be useful for you.

  http://www.ehow.com/how_5155431_install-software-Bluetooth-peripheral-device.html

  Paul

• USB speakers are silent after installing Windows 7

  I have a Dell Latitude E5400. It's a laptop. Initially, it came with Win XP.

  When Microsoft stopped its support for Win XP, I've upgraded to Windows 7.

  With Win XP, I had no problem getting USB speakers sound.

  With Win 7, I have a problem. When the power is connected, there is no sound from speakers with the exception of a short dull noise. The same noise appeared with Win XP.

  With Win 7 there is sound from built-in speakers or earphones.

  The speakers are Philips DGX320 computer speakers.

  I downloaded and installed the following:

  Realtek High Definition Audio Codec (Windows Vista / Windows 7 / Windows 8 32-bit).

  I have not found a way to configure a USB in Latitude E5400 speaker.

  Any help to solve the above will be appreciated.

  Hello

  Thanks for your quick response.

  I opened my acoustic window, took a copy of Θcran and placed next to your sound window creating a sound document - Ljud.doc which I uploaded to this message.

  My computer's language is Swedish (his illiterate =).

  I hope that you can see in the downloaded document I have only two devices of reading defined: 1 speakers/headphones, IDT High Definition Audio CODEC (active), peripheral by defect and 2. Independent headphones IDT High Definition Audio CODEC Ready (non-active)

  I have a click with the right button in the empty box, opens the contextual and chosen to display disconnected and disabled but devices there were not all these devices.

  I guess my problem is to define my USB speakers as a reading device? Clues?

• Uninstall cs 4 possible after cs5.5 update

  Hello

  I have a querstion. Some time ago I installed CS4 and then I upgraded to CS4 to CS5.5. I use a Macbook with OS X version 10.7.5 (recently, I'm a Mac-user).

  In enforcement foder on my Macbook, I see the installation of also installing CS5.5 CS4 software (see image below).

  

  Can I uninstall CS4 installation by throwing in Recyclin Bin? CS5.5 will still work then? The Adobe software is legal (I used it for work).

  I hope that I was clear. My English is not very good (I am from the Netherlands).

  Thank you...

  Robin

  Yes, you can uninstall CS4 safely even if you have upgraded to CS5.5. But please uninstall by using the suite of measures:

  1. First try to uninstall CS4 applications only if possible using the alias of uninstalling under Applications > utilities > Adobe Installers on your Mac.
  2. In case you have a problem in executing step 1 then download and run the cleanup tool from Adobe that you can get it here http://www.adobe.com/support/contact/cscleanertool.html. And select this option to delete CS4 in drop-down list on the right

  Thank you

  Vikas

• GPIB-USB-HS Windows Server 2003 driver available?

  I tried to install the GPIB-USB-HS device on our system of Windows Server 2003 R2 Standard 32 - Bit (German) with the last driver NI488.2 3.0 package.

  But the driver seems to be evil. After restarting Windows comes up with an error and event poster of the errors of several Viewer too:

  -The "nipxirmk" service failed to start due to the following error: the specified driver is invalid

  I think that the latest package isn't compatible Win Server 2003 but that it is announced at ni.com.

  Is it possible to install GPIB-USB-HS on a Win 2003 Server machine?

  Thanks for your help

  Kalize

  Windows Server 2003 32-bit R2 enables PAE by default ("physical address Extension") mode for addressing memory above the 4 GB limit.  National Instruments supports this operating system, it does not address memory above the 4 GB limit by using EAP setting and many pilots OR will fail to load if this setting is enabled.  (Note that your computer may intuitively put some of your memory above the 4 GB limit, even if you only have 4 GB of RAM).

  On Windows Server 2003, you can disable the EAP or prevent Windows to use addresses beyond 4 GB, which allows loading the drivers EITHER.  Please see KB 54D9I6M6: OR software failure when PAE (physical address Extension) is activated on Windows operat... for more information.

• I have two devices gpib-usb-hs; two of them work in MAX, but will only work in labview, help please?

  Hello

  For my application, I need to communicate with two instruments by using both devices gpib-usb-hs. I use Windows XP, Labview 6.1, MAX 5.1 version and NI488.2 version 2.42. I checked and this ni488.2 driver should be compatible with my devices gpib-usb-hs and my versions of windows and labview. I also tried versions older and more recent NI488.2 without success.

  I can communicate with my instruments properly in MAX, tell me that the devices themselves are functional. When I try to connect with my instruments using labview (using the example of gpib of labview), only devices gpib-usb-hs communicates with success. The other device returns the EDVR error: connection to the device or driver error.

  I don't really know where to go from here. The only thing I found strange was that the gpib-usb-hs work was has an alias name assigned visa while the unworking device does not. I tried to give him an alias name, but this did not help.

  Any suggestions would be greatly appreciated.

  There are many free tutorials on GPIB. It should explain how the various instruments can be connected to a single controller.

  That being said, even if it's unnecessary, you should have no problem with multiple controllers on the same pc. The two being connected, they pass all the tests in MAX? You are using an old driver and seem to have tried several different versions. I suspect a driver issue, and I advise you to uninstall all the drivers GPIB and VISA and then start again. But not all necessary can be done to satisfy your curiosity.

• GPIB-usb-hs on vmware fusion

  I am running Windows 7 64-bit on an iMac with OS X 10.6.5 via VMWare Fusion. I installed the driver NOR-488. 2, but can not see my GPIB-USB-HS device. This post: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-... seems to indicate that someone else has had success; his problem was using XP Mode.

  Anyone can shed some light on this? Can I expect the combination of the GPIB-USB-HS with Windows 7-64 on VMWare Fusion on an iMac to work?

  I also have a USB-6215 is working well.

  Thank you!

  John-

  I moved my virtual machine to an OS X 10.6.6 system and things did not work immediately. The GPIB-USB-HS was not visible to the MAX and in Device Manager it looks good, when when I open the property page, he says that there is no driver loaded.

  I was able to get the GPIB-USB-HS working by choosing to update the driver through the Device Manager. The steps to do this are:

  1. right click on the GPIB-USB-HS in Device Manager and select "update driver software...". »

  2. Select "Browse my computer for driver software" and then "Let me pick from a list of drivers for devices on my computer.

  3. you must be exactly a GPIB-USB-HS driver to choose. Select it and click Next.

  4. once it finished, view the properties of the device and make you it is said "this device is working properly."

  I did the same test for validating a single request with the device, but it seems to work.

  Let us know if this helps,

  Jason S.

• I have WIndows 7 on my PC. Hard drive crashed. You want to transfer even Windows 7 on new hard drive. Is that permissible?

  I bought Windows 7 a few months back and install it on my PC. Now I am having problem blue screen frequently.
  Experts say the drive is likely to crash any day. I want to change the hard drive.
  It will be possible to transfer Windows 7 from the old hard drive to new drive hard (I intend to abandon the old hard drive).
  Is that permissible? Thank you pl. reply

  HSG1

  Yes, you can transfer it, you may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• GPIB-USB-HS not install error code 39

  Trying to install a new GPIB-USB-HS controller on a windows XP SP3 Dell vostro 200 system, I get an error code 39 error (missing or damaged driver). I installed NI488.2 v2.7 and restarted without success. I uninstalled and then installed again (several times) without success. I managed to install the exact same hardware and software on other machines to xp windows successfully. MAX runs, but does not see the material. Any ideas anyone?

  
  

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• GPIB-USB-HS shows no MAX after that I used the wizard NI VISA DRIVER

  I accessed GPIB USB HS in the MAX software. As I was not able to communicate NF RLC remotely, so I tried Wizard DRIVER VISA OR according to tutorial Assistant pilot NI VISA , however, thnings went wrong and I am not able to see same GPIB to the MAX software now. What should I do now?

  The first picture below shows the GPIB USB HS as shown in the software MAX and the other image shows no GPIB USB HS.

  

  

  Yet once I installed driver USB GPIB link below:

  http://www.NI.com/download/NI-488.2-15.0/5427/en/

  Its working fine now.

  Thank you.