Error of the automatic backup feature

Similar Questions

• Need help with the automatic backup feature - please!

  Hello

  I recently started a flash animation and the AutoSave feature is enabled.  I got a good animation, but decided to play a little with it.  After a few moments, I decided to call one night and you exit the program ensuring NOT to save my work.  When you open this file the next time, I just found out that Flash has my file saved automatically while I was playing.  Now I have an animation worthless and have to start over again.  Is it possible to go back to an earlier backup or AutoSave at this point or I am about to do a lot of work again?

  Thanks to all who can help.

  As far as I know, the auto save feature is not able to track down the previous versions of the document being saved - that calls for a specified version control system. I think that Flash saves the file only if it is requested to the. There are several ways to enable or disable auto-save:

  1. in the dialog "new Document." You can choose to activate the automatic backup.
  2. In the "Properties of the Document" dialog box, you can set the check mark.

  If these are true, it will not happen of any economy car. The problem may be, there is also a section called ASR. Backup and recovery is not the same when it comes to Flash, but people tend to consider the same. You set the AutoRecover feature in preferences under general.

  • Windows: Edit > Preferences: general > auto salvage
  • Mac OS: Flash Professional > preferences: general > auto salvage

  Both has a default value of 10 minutes and it can confuse the user. Please see the document to make sure, that you have not disconnected ASR instead of the Auto-Save. You can do this:

  1. Go to preferences (Ctrl + U on Windows, and command + U on Mac OS) and check if the automatic recovery is set.
  2. Go to the properties of documents (Ctrl + Windows and cmd + D on Mac OS) and check if the Auto-Save is set.

  The first (in preferences) is ok to have fixed. It is the second, which could have caused problems for you.

  /Ockley

• How can I disable the automatic backup Muse?

  My speed slowed considerably due to the Muse AutoSave after each change and there is a lot of content on pages that I am, is it possible to turn off the automatic backup feature?

  Adobe Muse does not appear to have the ability to configure automatic backup. Unfortunately, there is no way to turn off auto-save from within the interface of the program. Maybe it's possible by modifying a Muse source file, but it will require confirmation by the developers of Adobe.

• Error: 0 x 80041321 during the automatic backup

  Original title: help! I can't back up my files

  I need help here, my vista would prompt me 2 back up my files once a week to the top when I try 2 follow the wizard to backup I keep until you get this message over and over again"backup file could not save your automatic backup settings for the following reason: the task image is damaged or has been tampered with." (0 x 80041321)
  Please try again. »
  I remember I had implemented the automatic backup wizard before and it was back up my files on my D drive periodically. I think that he was doing this once a week until lately it started to display the above error message. I don't know what went wrong with automatic backup settings and its installation wizard.

  Hi Ali,

  The scheduled backup job is possibly corrupt. Try these steps and check the result.
  Step 1: Delete the task in the Task Scheduler
  a. Click Start, type Task Scheduler and click on enter.
  (b) in the left pane, click "Task Scheduler Library" and select the backup task in the center pane and delete it.

  Step 2: Plan a new backup task
  a. see schedule a task
  b. check if the problem persists.

  If the problem persists, follow the steps suggested by "Karena R Saturday, May 22, 2010 14:38" and check the result. See Error code: 0 x 80041321

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can change the location of the automatic backup folder after creating a project on the first CC 2015?

  Trying to figure out from there is a way to change the location of the automatic backup folder after a project has already been created and the location of the automatic backup has been chosen. The reason for this is because we have an active work with a project that has been meet with an "unknown error" while he was trying to save on our server and also prevents form Auto-Save save projects. After you create a new project on the disk of the local computer and the Auto-Save in the same place, we decided later that we could like and the Auto-Save to live on two separate discs. I was wondering if there is a way to move the AutoSave folder without having to make a whole new project and copy everything on him. I searched through previous assignments, and even if current discussions focus on setting up an automatic backup location, I can't find all the topics related to the evolution of a current configuration.

  Thank you

  Stu-

  You just go to the project settings dialog box and change when the AutoSave file is defined.

  A couple of things about the Auto-save...

  -It waits a few seconds in action, so if you have a busy beaver editor constantly change things he could not AutoSave for quite a while...

  -automatic backup fact that both 'levels' it is wise to use Save-as to increment your project as you advance. So you can be sure that if you are on the last edit to the project AND... If corruption occurs, you have previous increments of work regardless of their deletion.

  Neil

• Disable the automatic backup in Apple applications

  How can I disable the automatic backup in the Script Editor and other Apple applications?

  I love how the captain tells us what is good for us and allows us no easy way to change things.

  AutoSave/Versions has been part of Mac OS X Lion. See these instructions. Save As will be in its normal position in all applications, and when you close the documents, you will be asked if you want to return (same result as the old do not save).

  Versions and AutoSave will always run in background for the applications that use it. You can't really turn off without disrupting some application menus, but it's been at least OS X behave more like Snow Leopard or earlier version.

• Error during the full backup of the system Vista "Media is not UDF.

  Original title: error during the full backup of the system Vista "Media is not UDF" I tried CD - R and DVD + R

  I just finished day three re - build with all the latest updates and now I want an IMAGE backup to recover from.  When I run Backup asked that media... suggest a label for the DVD but I get the error 'Media is not UDF' end there...

  Also if I back up to another hard drive on my system can recover from this Image?

  Thank you!

  Ken D

  Hello

  backup on an external hard drive or DVD

  the 1st link below is how do the backup of the complete computer for the company, ultimate and vista business

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How can I disable the automatic backup in Photo Viewer?

  I did a clean install of Windows 7 Home Premium. As I looked through some of my pictures, one of them was displayed on the side and I used the 'spin' button to see her standing. As I clicked on the button 'Next', the picture has been saved without any confirmation. I don't want to save changes in the viewer of photos at all, and I have not found any setting for this. How can I disable the automatic backup in Photo Viewer?

  Hello

  Please note the last changes you make on your computer will be automatically saved on your computer and which will be unchanged, unless you change it again on your computer.

  As it is a design, there is nothing we can do from our end.

  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...

  https://connect.Microsoft.com/dashboard/Info/

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is it possible for first Pro CC hide the automatic backup window

  Is it possible for first Pro CC hide the automatic backup window, without turning off autosave function?

  When such a device is save you wonder why you wouldn't be able to do everything that is the case in the car.

  I'm guessing you want automatic backup in the background?

• FRA - DISABLE THE AUTOMATIC BACKUP

  Hello
  
  I'm using oracle 11g on windows 7.
  
  I configured recoery Flash area. Because of the auto backup is stored in FRA, the space is filled immediately.
  I manually take the weekly backup. So is it possible to completely stop the AutoSave?
  will there be problems in advanced due to the deactivation of the automatic backup.
  
  Need your advice.

  What autobackup is set up? If it's a working RMAN, find work and simply turn it off.

  Aman...

• Use the automatic backup? If so, what are the settings?

  Bob ten recommended to disable the automatic backup in PP CS4 about a year on Creative Cow. Questions had been report there, he said.

  What should I do? I have lost assets somehow for the first half of a 30-minute project, went into the automatic backup file only to find out that the default of the PP is only 5 automatic saves every 20 minutes. Fortunately, I was able to get the first half of the return project by importing a backup that I did yesterday, and the important in the affected project and copying assets (I was wondering if it is wise to put everything in a new project where the project file is corrupted).

  Automatic backup sounds like a good idea. If you agree, what the parameters for what would you recommend? I "Ctrl-S" after almost all the changes I make in the timeline. but I never know what might happen at the beginning of the timeline, if I work at the end - accidents as a mouse hangs up while I'm trying do drag an asset on the timeline and unintentionally damage assets at the beginning of the timeline (why mouse hang up, anyway? Is - this sweating on hand? Stressed memory? Having bridge, AE and PP open at the same time? I've got 12 GB, but it's so boring.).

  Your expertise is greatly appreciated.

  Paul

  Paul,

  I wonder what prompted Bob seem not to use AutoSave. I didn't get a lot of negative, when it is properly configured and then used reports correctly. I leave the default setting of backup 5 automatically @ 5 min. intervals. However, I also use Save, Save_As and Save_As_a_Copy on many projects. They are all similar, but there are differences. This ARTICLE will give you general information. When you know how everyone is different, you can then determine a workflow, what suits you and your needs.

  If I do a particularly difficult project, I could also 'archive' some recording automatic folders and files with a copy, just for guard duty. However, with the right combo from the different options of backup, it also will be those who backup automatically extra too.

  Now, it seems that Adobe changed the functions of automatic backup, but I was not able to confirm this. At the same time, AutoSave was smart enough. If we did not no Assembly, AutoSave would not be invoked at the interval, only with editing and changes. Somewhere along the way, it seems that AutoSave now ONLY works with the interval, so that if we let the machine for an hour, they find themselves with 5 automatic registration in duplicate in the folder. Personally, I liked the "old way" much, much better. Who needs 5 (or anything that is chosen) duplicate PRPROJ files? Maybe something in the code forced Adobe to 'dumb down' AutoSave?

  As a side note, you lose certain assets. I have a policy - never use goods initially in my projects - only Copies, the originals on my NAS. Capture to miniDV Tape files is an exception, I do not reuse the tapes and could always re - enter, if necessary. Also, don't forget that the PRPROJ file does not contain any media (titles are a limited exception) and ONLY links to this media.

  Good luck

  Hunt

• My iPad is no longer the automatic backups in icloud. When I try to do it manually it gives me an error message

  Automatic backup on icloud no longer works. When I try to run it manually it gives me an error message

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > managing storage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > BackUp), reboot the device and then turn on BackUp on new.

  If it does not help disable backup again, remove your existing back to the top of the settings > iCloud > storage > managing storage > backup > appliance (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > General > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do it with settings > iCloud > storage > managing storage > backup > this device > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• How to disable the automatic backup in DWCC2015

  Research gave to go edit > Preferences > Documents > and so on.  But there is no other choice for Documents in tabs preferably.  Someone at - it a good answer?  Very appreciated for any input. It is CC2015 and not CC2014. I just got this choice, it was relevant. Thank you

  Peoj

  There is no automatic backup in DW.

  "I guess you mean either that pesky" you want to save "dialogue that opens all the time while working in PHP pages, or the Auto push for testing server"feature.

  To get this pop-up to stop popping up, turn on design mode when working in PHP pages by clicking on the arrow of the direct button on your toolbar and selecting Design. There is no way to get rid of everything working in Live View mode with the PHP pages.

  The automatic thrust to the test server, you can get rid of it by going in...

  Site > Manage Sites > choose your site > Edit > servers > choose your server > Edit > advanced > uncheck automatically "push files to the test server" > save

• How to disable the automatic backup in windows 7

  I changed to 'never' backup scheduler, but again, the computer saves the data and invites me to insert a disc for the copy of the backup files.

  I have my files backed up offline and don't want or need this help.

  How can I disable it either doesn't work at all?

  Delete the calendar?

  http://superuser.com/questions/315322/change-scheduled-Windows7-backup-setting

  http://Windows.Microsoft.com/en-GB/Windows7/set-up-or-change-automatic-backup-settings

  PS This is windows backup that runs and not a backup provided by the manufacturer of your PC?

• Turning off the coast of the automatic backup of Windows 7 Regular instructions do not work

  I used the routine under system and security, and high back and restore to attempt to define a suitable schedule, but no calendar works properly.  I tried to disable the calendar, and yet it is still functioning on its own schedule.  I regularly do a manual back up, so don't want to auto save turned on.  How automatic gradin upward?

  Hi Fred,.

  I suggest you follow the steps below to disable automatic backup.

  (a) open the control panel.

  (b) click the backup and restore icon.

  (c) click on the calendar link in the upper left pane, turn.

  You can also check out the article below.

  Set up or change automatic backup settings

  http://Windows.Microsoft.com/en-in/Windows7/set-up-or-change-automatic-backup-settings

  See also section below.

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/back-up-and-restore-frequently-asked-questions

  If you have additional questions, feel free to post. We will be happy to help you.