error of the user in cluvfy equivalence

Hello

I try to install 2 node RAC (RHEL 5 + oracle 10g)

I had filled all the conditions to his subject

stupid, I thought the user equivalence and checked by logging

SSH rac1 rac2 GSU and date, it does not prompt for any password

but after runing cluvfy before running Setup

I said user equivalence failed for RAC1 but past 2nd node

I followed the same procedure for both nodes

can tell me, how should I solve this problem

I had also re created dsa rsa keys and authorized keys, but the problem persists

The user equivalence test failed for user 'oracle '.

Tags: Database

Similar Questions

  • Get errors for the user input data filter no KB 911895 HID

    OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
    What should I do to get rid of this popup that wizzard windows keeps giving me?

    Hi Graybeard,

    What is the exact error message you get?

    HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:

    The screen saver does not start after the installation of a wireless pointing device
    http://support.Microsoft.com/kb/913405

    What version of the operating system Windows am I running?
    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
    http://support.Microsoft.com/kb/910339

  • User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

    Isn't that one profile, the administrator and another account are ok

    ·                        Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not work:

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947215#letmefixit

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    See you soon.

    Mick Murphy - Microsoft partner

  • Failed to start, error message - the user name or password is incorrect

    Original title: Windows key + R no solution

    I tried the suggested solutions winkey and none work. What I did is updated. To restart the computer it does not start starting System. It gives me the error message the user name or password is incorrect. I have nevrr had to use a password at startup.

    Hi Dolores,

    Thanks for posting your query on the Microsoft Communities.

    I understand that you cannot start Windows after you install an update. Let me try and help you with this question.

    1. What is the brand and model of the PC?

    2. what solution did you tried to use the Windows key + R?

    3. how many user accounts are defined on this computer?

    4. is this a child account?  The thread is in the parental controls category.

    5. I understand that you have not set a password for this account, but requires you to enter a password when you're on the logon screen?

    Check if you are able to start safe mode.

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    If you are able to start safe mode, and then try to perform a System Restore from there.

    If you are not able to start safe mode, then I suggest you go to the Windows recovery environment and perform a system restore.

    http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

    Let us know the result. If you have any other questions, we will be happy to help you.

  • Sat T135D: error message 'the user name or password is incorrect' when connecting

    Hello!

    I bought a PC laptop Toshiba T 135 d, and after a few days, I worked with it, I changed something in the users account and now it gives me this error "the user name or password is incorrect" when connecting. I mention that I have not introduced any password before.

    Can you help me?

    > I changed something in the users account
    And how to help? Who knows what you did there.

    I can tell you that it's really bad situation now. Without correct password, you will not be able to start the new installation of the operating system using the HDD recovery procedure.

  • Cartridge error, consult the User Guide, there's no support

    LEXMARK 5600, has an error message that says "ERROR of CARTRIDGE", consult the User Guide.
    Nothing seems to work & user guide has no information on this issue. This device is only 6 months old. PLEASE HELP ME FIND THIS PROBLEM.

    Thank you
    jimipman

    You should have a warranty of 1 year with this printer. Call the support of Lexmark. Microsoft doesn't sell printers.

  • Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

    I CAN NOT LOG - ON

    I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • Unable to connect to the administrator account, error message "the user profile service not a not the connection, the profile cannot be loaded"

    the user profile service has no connection, impossible to load the profile Monte after giving the correct password and im account .but other account users can connect.

    * help loggin - original title *.

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

  • User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

    I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

    Hello

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps and happy holidays!

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • New user account will not identify you. Error Msg: "the user profile service has no logon. Already tried the registry option (list of profile edition)

    Hi guys,.

    (I already tried this https://support.microsoft.com/en-us/kb/947215)

    I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help

    OS: Windows 7 Home Premium

    Hello Shashank,

    Thanks for posting your query on the Microsoft Community.

    I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.

    I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-Administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

     

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you

  • Error updating the user organization

    Hello

    We have a problem in changing the Organization of the user through the console of Administration of IOM. For some organizations of problem, when a user is to be moved to one of the organisations problem, an error dialog box on the admin console is displayed:

    "An error has occurred. The corresponding error code is IAM-0080001 "."

    Checking the logs, the error itself stackdump begins with:
    < 3 October 2012 9:50:44 CEST > < WARNING > < org.eclipse.persistence.session.oim > < BEA-000000 > <
    Exception [EclipseLink-4002] (Eclipse - 2.1.3.v20110304 persistence Services - r9073): org.eclipse.persistence.exceptions.DatabaseException
    Inner exception: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (IAMTEST_OIM. FK_ORC_ORD) violated - parent key n
    OT found
    ORA-06512: at "IAMTEST_OIM. OIM_USER_MGMT', line 858
    ORA-06512: at line 1

    Error code: 2291
    Call: BEGIN OIM_USER_MGMT. BulkUserModify (p_intUserKey = >?, p_arUSRList = >?, p_arColumnlist = >?, p_arColumnValue = >?, p_arMLSColLocaleValue = >?, p_intReturnC)
    ode_out = >?, p_strErrMessage_out = >?) ; END;
    link = > [1, oracle.sql.ARRAY@199c54c1, oracle.sql.ARRAY@199c6768, oracle.sql.ARRAY@199c489c, oracle.sql.ARRAY@199c6167, = > p_intReturnCode_out,]
    [= > p_strErrMessage_out]
    Query: DataReadQuery()
    at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:797)
    at org.eclipse.persistence.internal.databaseaccess.DatabasePlatform.executeStoredProcedure(DatabasePlatform.java:1991)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:593)
    at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:526)
    at org.eclipse.persistence.sessions.server.ServerSession.executeCall(ServerSession.java:529)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:263)
    at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelect(DatasourceCallQueryMechanism.java:245)
    at org.eclipse.persistence.queries.DataReadQuery.executeNonCursor(DataReadQuery.java:192)
    at org.eclipse.persistence.queries.DataReadQuery.executeDatabaseQuery(DataReadQuery.java:148)
    at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
    at org.eclipse.persistence.queries.DataReadQuery.execute(DataReadQuery.java:134)
    at org.eclipse.persistence.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2392)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1233)
    at org.eclipse.persistence.internal.sessions.AbstractSession.executeSelectingCall(AbstractSession.java:1397)
    at oracle.iam.oimdataproviders.impl.OIMUserDataProvider.modifyProcedureCall(OIMUserDataProvider.java:721)
    at oracle.iam.oimdataproviders.impl.OIMUserDataProvider.modify(OIMUserDataProvider.java:578)
    at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.modifyEntity(EntityManagerImpl.java:388)
    at oracle.iam.platform.kernel.impl.EntityDefaultActionHandler.execute(EntityDefaultActionHandler.java:41)
    at oracle.iam.platform.kernel.impl.DefaultActionHandler.execute(DefaultActionHandler.java:41)
    at oracle.iam.identity.usermgmt.impl.handlers.modify.ModifyUserActionHandler.execute(ModifyUserActionHandler.java:108)
    at oracle.iam.identity.usermgmt.impl.handlers.modify.ModifyUserActionHandler.execute(ModifyUserActionHandler.java:56)
    at sun.reflect.GeneratedMethodAccessor685.invoke (unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
    ...

    The error does not occur if a user is created in the Organization of the problem, but when the user is moved out of the Organization of the problem and tried to be postponed in the Organization of matter, the same error occurs.

    We use the OIM 11 g Release 1 (11.1.1.5.0)

    I have not found references to this error in my research for some suggestions on how we can recover/fix the it are appreciated. As mentioned, only some organizations have this problem, but I can't find all the differences between these problem and other organizations are normal.

    Thank you.

    Published by: user10929505 on October 2, 2012 23:50

    I doubt that the individual values themselves are the issue, there is no reason that I can see why an ord_key must necessarily correspond to an act_key, although it can normally, so fix that probably would not help. Most likely the different numbers are somehow the symptom of something that was wrong.

    I would definitely say it's safer to delete and recreate your organizations, but bear in mind organization names must be unique. I don't know if this applies even with deleted organizations, but in case it does, it may be better to rename the former organizations, create new ones with the required names, move users across, then delete 'old'.

  • Satellite Pro M30 - error message: the user is not authorized to update BIOS

    Hello

    I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

    I am running Windows XP Pro SP3 and tried first update in Windows.
    I however got the message "the user is not allowed to update BIOS.

    This message is quite surprising given that I have administrator privileges.

    I read that you can use a floppy disk to update, but I did not...

    So, is it possible to update the Bios with the CD?

    See you soon,.
    R.S.

    Hello

    I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

    As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
    This BIOS win can be improved only from a running OS Win.

    In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
    Then maybe you should try to update the BIOS without SP3 installed?

    Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

    _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

    Concerning

  • Unable to connect to the laptop, receive error message "the user profile service failed.

    can not connect to the computer

    * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

    Hi vincentbyrne


    What operating system is installed on the computer?

    You can refer to the link below and use the provided steps to identify the installed operating system.

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running


    If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

    http://support.Microsoft.com/kb/947215

     

    I hope this helps.

  • Error message: the user profile service has no logon. Profile of user was not found.

    Just after that Microsoft updates yesterday we received the following message: the user profile service has no logon.  Profile of user was not found.

    The user is locked.  I tried the system restore, but the computer does not. I don't have a disk of Vista to re - install.  Peux-I re - install online?  I have the product key.

    Thank you

    Joe R.

    ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    See if the information in the above tutorial will help you.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    Difficulty of a corrupted user profile

    After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/kb/947242

    A temporary profile is loaded after you connect to a Windows Vista-based system

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s since the Partition of recovery in case of hard drive failure or System Crash, when you are running correctly.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

    Original title: how to change a password for an administrator account that does not work properly?

    When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

    Hello


    Were there any changes (hardware or software) to the computer before the show?

    Perform the steps in the article mentioned below and see if the problem persists.
    http://support.Microsoft.com/kb/947215

    Hope that helps.
     

Maybe you are looking for