Error updating the user organization
HelloWe have a problem in changing the Organization of the user through the console of Administration of IOM. For some organizations of problem, when a user is to be moved to one of the organisations problem, an error dialog box on the admin console is displayed:
"An error has occurred. The corresponding error code is IAM-0080001 "."
Checking the logs, the error itself stackdump begins with:
< 3 October 2012 9:50:44 CEST > < WARNING > < org.eclipse.persistence.session.oim > < BEA-000000 > <
Exception [EclipseLink-4002] (Eclipse - 2.1.3.v20110304 persistence Services - r9073): org.eclipse.persistence.exceptions.DatabaseException
Inner exception: java.sql.SQLIntegrityConstraintViolationException: ORA-02291: integrity constraint (IAMTEST_OIM. FK_ORC_ORD) violated - parent key n
OT found
ORA-06512: at "IAMTEST_OIM. OIM_USER_MGMT', line 858
ORA-06512: at line 1
Error code: 2291
Call: BEGIN OIM_USER_MGMT. BulkUserModify (p_intUserKey = >?, p_arUSRList = >?, p_arColumnlist = >?, p_arColumnValue = >?, p_arMLSColLocaleValue = >?, p_intReturnC)
ode_out = >?, p_strErrMessage_out = >?) ; END;
link = > [1, oracle.sql.ARRAY@199c54c1, oracle.sql.ARRAY@199c6768, oracle.sql.ARRAY@199c489c, oracle.sql.ARRAY@199c6167, = > p_intReturnCode_out,]
[= > p_strErrMessage_out]
Query: DataReadQuery()
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:797)
at org.eclipse.persistence.internal.databaseaccess.DatabasePlatform.executeStoredProcedure(DatabasePlatform.java:1991)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:593)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:526)
at org.eclipse.persistence.sessions.server.ServerSession.executeCall(ServerSession.java:529)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:206)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:192)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelectCall(DatasourceCallQueryMechanism.java:263)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeSelect(DatasourceCallQueryMechanism.java:245)
at org.eclipse.persistence.queries.DataReadQuery.executeNonCursor(DataReadQuery.java:192)
at org.eclipse.persistence.queries.DataReadQuery.executeDatabaseQuery(DataReadQuery.java:148)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:740)
at org.eclipse.persistence.queries.DataReadQuery.execute(DataReadQuery.java:134)
at org.eclipse.persistence.internal.sessions.AbstractSession.internalExecuteQuery(AbstractSession.java:2392)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1291)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1273)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1233)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeSelectingCall(AbstractSession.java:1397)
at oracle.iam.oimdataproviders.impl.OIMUserDataProvider.modifyProcedureCall(OIMUserDataProvider.java:721)
at oracle.iam.oimdataproviders.impl.OIMUserDataProvider.modify(OIMUserDataProvider.java:578)
at oracle.iam.platform.entitymgr.impl.EntityManagerImpl.modifyEntity(EntityManagerImpl.java:388)
at oracle.iam.platform.kernel.impl.EntityDefaultActionHandler.execute(EntityDefaultActionHandler.java:41)
at oracle.iam.platform.kernel.impl.DefaultActionHandler.execute(DefaultActionHandler.java:41)
at oracle.iam.identity.usermgmt.impl.handlers.modify.ModifyUserActionHandler.execute(ModifyUserActionHandler.java:108)
at oracle.iam.identity.usermgmt.impl.handlers.modify.ModifyUserActionHandler.execute(ModifyUserActionHandler.java:56)
at sun.reflect.GeneratedMethodAccessor685.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
...
The error does not occur if a user is created in the Organization of the problem, but when the user is moved out of the Organization of the problem and tried to be postponed in the Organization of matter, the same error occurs.
We use the OIM 11 g Release 1 (11.1.1.5.0)
I have not found references to this error in my research for some suggestions on how we can recover/fix the it are appreciated. As mentioned, only some organizations have this problem, but I can't find all the differences between these problem and other organizations are normal.
Thank you.
Published by: user10929505 on October 2, 2012 23:50
I doubt that the individual values themselves are the issue, there is no reason that I can see why an ord_key must necessarily correspond to an act_key, although it can normally, so fix that probably would not help. Most likely the different numbers are somehow the symptom of something that was wrong.
I would definitely say it's safer to delete and recreate your organizations, but bear in mind organization names must be unique. I don't know if this applies even with deleted organizations, but in case it does, it may be better to rename the former organizations, create new ones with the required names, move users across, then delete 'old'.
Tags: Fusion Middleware
Similar Questions
-
Get errors for the user input data filter no KB 911895 HID
OT: iI have windows xp S/P 3 installed also apple i pad I get errors for the user input data filter no KB 911895 HID
What should I do to get rid of this popup that wizzard windows keeps giving me?Hi Graybeard,
What is the exact error message you get?
HID Non-User Input data filter is an optional update. I suggest you try the steps from the following link:
The screen saver does not start after the installation of a wireless pointing device
http://support.Microsoft.com/kb/913405What version of the operating system Windows am I running?
http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-runningTroubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339 -
How can I update the user interface controls in the UI thread
Hi all
I want to do a custom image to display this URL source support.
I start a thread to ask the image of the network data, and then update the display of the image with the data, but I get the error:
ApplicationPrivate::resourceManager: ERROR called from the thread of user QThread (0x81eeb8c) interface
ApplicationPrivate::resourceManager: A user interface thread named methodIt's my code segment:
class URLImageView: public CustomControl, public QThread { public: URLImageView(); private: void run(); ImageView* mImageView; Container* mRootContainer; }; URLImageView::URLImageView() { mRootContainer = Container::create().background(Color::Gray).preferredSize(100,100); mImageView = ImageView::create().image(QUrl("asset:///button.png")); mRootContainer->add(mImageView); setRoot(mRootContainer); start(); } void URLImageView::run() { //get data from network //... //... //create image from binary data Image* image = new Image(pixelBuffer); mImageView->setImage(image); }
I know that in the old BB OS (Java Platform), I can get the lock of event request like this UI:
synchronized (Application.getEventLock()) { // I can update UI control here }
Is it same way to Cascades BB10 or what is the right way, if I want to update the user interface in the UI thread?
Thank you
This looks like what signals are useful for, when it is connected with the option QueuedConnection. I don't have a link for you, but I'm sure that you can get with this description.
-
Failed to start, error message - the user name or password is incorrect
Original title: Windows key + R no solution
I tried the suggested solutions winkey and none work. What I did is updated. To restart the computer it does not start starting System. It gives me the error message the user name or password is incorrect. I have nevrr had to use a password at startup.
Hi Dolores,
Thanks for posting your query on the Microsoft Communities.
I understand that you cannot start Windows after you install an update. Let me try and help you with this question.
1. What is the brand and model of the PC?
2. what solution did you tried to use the Windows key + R?
3. how many user accounts are defined on this computer?
4. is this a child account? The thread is in the parental controls category.
5. I understand that you have not set a password for this account, but requires you to enter a password when you're on the logon screen?
Check if you are able to start safe mode.
If you are able to start safe mode, and then try to perform a System Restore from there.
If you are not able to start safe mode, then I suggest you go to the Windows recovery environment and perform a system restore.
Let us know the result. If you have any other questions, we will be happy to help you.
-
When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.
Isn't that one profile, the administrator and another account are ok
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
finish by updating the user interface...
IM create screen with pagination... Load button to add more data, it is normal on os 6 and 7 os... but in the os 5 process completed... I haved create to update the user interface of the thread to invoke later...
This is my code to call later:UiApplication.getUiApplication().invokeLater( new Runnable() { public void run() { // delete(hfmLoad); for (int i = 0; i < comp.length(); i++) { lowerScreen.add(list[i]); HorizontalFieldManager hfmBut = new HorizontalFieldManager( Field.FIELD_RIGHT); hfmBut.setMargin(0, 5, 0, 0); hfmBut.add(but1[i]); lowerScreen.add(hfmBut); spasi = new SeparatorField() { protected void paint(Graphics g) { g.setColor(Color.GRAY); int currentStipple = g .getStipple(); try { g .setStipple(0xAAAAAAAA); // Dotted super.paint(g); } finally { g .setStipple(currentStipple); } } }; spasi.setMargin(0, 5, 5, 5); lowerScreen.add(spasi); invalidate(); //lowerScreen.add(new LabelField("Semangat",Field.FOCUSABLE)); } hfmLoad .replace(_ourAnimation2, loadBut); invalidate(); }
any solution?
None of the invalidate() method calls are needed in this code.
For efficiency rather than to add the field individually, I recommend that you use the addAll method. In your loop, create an array of fields to add, and then use addAll to add table.
If you do these two things I think that your problem will be solved.
But if not, can you please tell us exactly what are the messages you see when the process is complete.
-
need the location and update the user interface in each a second
you will need to update the user interface by every second so that my application will not hold?
What is the best way to implement?
(in the PPH), it should look like this:
void locationUpdate (long latitude, longitude long); -
Need help with this code to update the user interface example
I'm triying to understand the differences between the three methods to manage UI interactions.
I'm really confused with these three terms when triying them figure out in a real case.
Basically, I know that I should use invokeLater, invokeAndWat, or getEventLock() to avoid
This exception: java.lang.illegalStateException: engine access UI without holding the lock on the eventThe code below illustrates the function of the invokeAndWait method, but if I replace it with
invokeLater or getEventLock() the program will work exactly the same way.
Could you please change the code to show the differences between the three
methods of updating the user interface?/ public final class HelloWorldMainScreen extends form {}
private LabelField labelField;
public HelloWorldMainScreen() {}
labelField = new LabelField ("Hello World");
Add (labelField);
Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
thread. Start();
}{} public void appendLabelText (String text)
labelField.setText(labelField.getText()+"\n"+text);
}}
SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
HelloWorldMainScreen screen;public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
this.mainScreen = screen;
}public void run() {}
for (int i = 0; i)< 10;="" i++)="">
try {}
Thread.Sleep (5000);
} catch (InterruptedException ex) {};
UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}
public void run() {}
mainScreen.appendLabelText ("Update");
}
});}
}
}These three concepts are very confusing for a lot from people so all explanatory source code
describing their functions will be highly useful for everyone, I think.Thanks in advance!
With respect to the effect, there is no difference between methods. The difference is the way in which the result is achieved. So we can't change the code to show you the difference.
As we are unable to demonstrate the difference, you have to do with an explanation. To understand the explanation, you'll need to understand the thread of events, so if you have not already, please consider this:
http://supportforums.BlackBerry.com/T5/Java-development/what-is-the-event-thread/Ta-p/446865
If the three options are differentiated by the processing order:
(a) invokeLater executes the update on the thread of events. The transformation takes place at a later stage and the code which is in order after the invokeLater will actually run before the code within the invokeLater.
(b) invokeAndWait also manages the update on the thread of events, which means that all other events that await on the thread of events will be run before this code. But any code after the invokeAndWait will not be executed.
(c) the synchronized option, like invokeAndWait, runs the update of the UI before moving on to the following code. The difference is that the code to run on the event Thread is not executed before code in the synchronized block.
If this is meaningless, so that probably does not matter too much. in general, you should use invokeLater, except if you need to update the user interface occur in the order with your background processing. If so, use invokeAndWait. It has synced are very few occasions where you must use the block, and it should be very small updates to the user interface and you should understand the implications this could have on the wire events.
-
Try to update the user interface with another thread
Hello
Start a class JavaFX from another application, and then I want to change the UI of it components. I tried to use Platform.runLater to do.
But the GUI crashes at the start (does not display anything) for the first 5 seconds (sleep time) changes and shows.
I want to display the GUI at first, and then after 5 seconds the GUI should be updated with the message, but with the code it hangs just first and screens below everything after 5 seconds.
Here sampleGUI is a an application javafx with inside text fields.
+ / public class StartGame extends Application {+
+@Override+
+ public void start (steps) riser Exception {+
final sampleGUI gui = new sampeGUI();
GUI. Start (training);
+ Platform.runLater (new Runnable() {+)
+@Override+
+ public void run() {+
+ try {+
System.out.println ("sleep now...");
Thread.Sleep (5000);
System.out.println ("sleep above!");
gui.updateText ("new message");
+} catch (InterruptedException ex) {+
System.out.println ("exception" ex); +
+}+
+}+
+});+
+}+
+}+Platform.runLater(new Runnable() { @Override public void run() { // ... } });
causes the run method of the executable to run on the Thread of the FX Application. Since you put Thread.sleep (5000) inside the run method of your executable, sleep occurs on the Thread of the FX Application.
The call to runLater (...) can be called from any thread, including the Thread of Application FX.
So, if you are not in the FX Application thread, you want to:
// any long-running task, for example System.out.println("Sleeping now"); Thread.sleep(5000); System.out.println("Sleep over"); Platform.runLater(new Runnable() { @Override public void run() { // update UI: gui.updateText("New Message"); } });
If you are on the thread of the Application of FX, which is the case in your Application.start (...) method, you must create a new thread to run your code of long duration. You can do this "manually", creating a Thread and a workable for it to run, but it is probably best to use the simultaneity of JavaFX API, which has many hooks useful for updating the user interface on the Thread of the FX Application.
In this case, the code would look like this:
public class StartGame extends Application { @Override public void start(Stage stage) throws Exception { final SampleGUI gui = new SampleGUI(); gui.start(); final Task
waitingTask = new Task () { @Override public String call() throws Exception { System.out.println("Sleeping"); Thread.sleep(5000); System.out.println("Sleep over!"); return "New Message" ; } }; waitingTask.setOnSucceeded(new EventHandler () { @Override public void handle(WorkerStateEvent event) { gui.updateMessage(waitingTask.getValue()); } }); ExecutorService executor = Executors.newSingleThreadExecutor(); executor.submit(waitingTask); } } There are (probably of dozens of) other ways to use a task to do. See the API documentation [url http://docs.oracle.com/javafx/2/api/javafx/concurrent/Task.html] for the task for more information.
-
the form of course update the user field value
Can experts tell me if we can retrieve the data from the form of courses and update the user field. If so, please could you tell me how to do and a simple example will be useful.
Thank you very muchWrite an adapter to transfer and pass the value of the form attribute of the user
How to create a transfer adapter: -.
Name of the adapter:-adapter task of transfer process
Adapter type:-treat stains
Description:-adapter task of transfer process
Variable:-determination of entry (of Type String) during execution
Task of the adapter:-logical task... Adapter--> Variable defined return value--> entry
Save... Build... Compile...
For example, you have created your adapter generic transfer...Suppose that your Mobile is stored in the field of process form Mobile...
In the process definition, create a task... Set the task to transfer adapter process...
entry--> process Date--> Mobile
Return value of--> user definition adapter--> Mobile...It is a very convenient way of transmission data Mobile Process to user profile without writing any custom code
Mark if you find it useful, useful...
-
Satellite Pro M30 - error message: the user is not authorized to update BIOS
Hello
I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.
I am running Windows XP Pro SP3 and tried first update in Windows.
I however got the message "the user is not allowed to update BIOS.This message is quite surprising given that I have administrator privileges.
I read that you can use a floppy disk to update, but I did not...
So, is it possible to update the Bios with the CD?
See you soon,.
R.S.Hello
I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.
As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
This BIOS win can be improved only from a running OS Win.In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
Then maybe you should try to update the BIOS without SP3 installed?Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.
_Ps: If you laptop then runs without problem a BIOS update is not necessary! _
Concerning
-
the user profile service has no connection, impossible to load the profile Monte after giving the correct password and im account .but other account users can connect.
* help loggin - original title *.
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
-
I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
After Windows Update, the user cannot access password field on the login in Windows 7 screen
Windows 7 Home 64 bit, our machine is set with two users - two passwords. As a result of the automatic application of some updates (a number have been applied at the same time we were absent), a user can no more connection time because:
-the password field is hidden
-System attempst to check with a blankc password and return an error of incorrect user or password.
For some reason that I can't (even if logged on as administraor) remove or change the users password.
It seems that your security database is damaged. Here are some options you can try:
- Create new accounts. You can do this through steps 1-5 as before, then by typing these commands:
NET user "On" xxyyzz / add
net localgroup administrators "On" / add - Perform a restore of the system to a point while the problem appeared.
- Back up your data, and then reload Windows to a freshly formatted drive.
- Create new accounts. You can do this through steps 1-5 as before, then by typing these commands:
-
Hello
I would like to change the password of the user in an organization but has not found any JavaScript action that would allow such a change - on the example, there is only a workflow of create user who manages all the attributes of the user within a single action.
Thank you
Traian
Just try:
User.Password = "secret";
User.Update ();
In a box containing a script when the user is a vcloud user entry
Maybe you are looking for
-
Cannot delete email "from address".
Hello, I am currently using OS X Yosemite v10.10.5, MacBook Pro (retina, 13 inches, early 2015) I recently tried to add another account to my email accounts It did not work, so deleted the said e-mail account > Preferences > accounts > select the acc
-
I pushed the control & the / key at the same time, the page I'm on and then shrinks. How to cancel it? Thank you
-
IPHONE 6 WON'T SYNC MY OUTLOOK 2016 CALENDAR
6 IPhone will not sync with my Outlook 2016 calendar
-
Store data from the Serial Port in the buffer and then take action?
Hello! Everyone, I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW. But I have a duty, therefore needing help. initially I see some of the tutorial videos and learned about the LabVIE
-
How to burn a CD in mp3 format
I'm trying to burn songs on my list for a CD in the mp3 that I did, but don't remember how I did it thanks