Error of VSS volume controls with SUCCESS / ME
I finally had time to MPIO configuration for data NTFS on a Windows 2008 R2 vm to my EQ group, but I get an error 'VSS volume control is not accessible from this host'. I have the EQ, access policy VSS to IP to accept the whole subnet. Notifications of EQUALIZER error includes "CHAP grpadmin authentication failed", but I'm only using the IP access, chapter not CHAP is optional, no? This is a subnet on the internal switches. In addition, access to the Group PS, "Use Chap credentials for iscsi discovery" don't are not ticked.
In the view of host MPIO, connections iscsi displays "2 ok, 2 bad." I only have 2 network cards on this virtual machine.
Edit: Also, in the Group Access window, access to VDS/MVS has a green check mark.
Hello
Probably that's because there's a CHAP ACL on the vss-control volume. When the remote installation wizard to configure the table he asks you to create a name of user and password c. He uses the ACL on the default vss control volume.
If you delete this ACL CHAP error will probably disappear.
Kind regards
Tags: Dell Products
Similar Questions
-
VSS volume control Config Wizzar error
Hello
I get an error when I validate the configuration of the VSS feature on my server with the DELL auto 4.5 Snapshot Manager
Do you have an idea of the problem?
Thank you very much for your help
Error:
Started at 22:01:57
Waiting for the ASM on the hyper-rd12 host Agent service.
Preparation 1 host (s) to save the setting changes
Apply the settings
Saving settings of PS Group on the "hyper-rd12 host access.An error has occurred:
Error saving access to the PS grpadmin group: 1. specified group WKAddress is not accessible.
The well-known group address is the IP address of the iSCSI Group.
Thus, your group has an iSCSI IP address and then each port on the controller has an IP address (eth0, eth1, eth2, eth3 (depending on the model, you can have 1, 2 or 4 iSCSI ports (older models may also have 3 iSCSI ports)).)
Always use IP iSCSI of the group in the connectivity section in ASM and not the IP address of one of the eth ports.
If you have used this, disable all but 1 of your iSCSI network cards and try to ping the IP of the Group and all the IPs port. If you can not achieve one or more of them, you need to check your network because it would be a separate iSCSI configuration, which will not work with an Equallogic implementation.
-
Program volume control missing from the taskbar.
MY VOLUMN CONTROL ICON IS MISSING FROM THE TOOLBAR. I TRIED TO CHECK THE BOX IN THE CONTROL PANEL, BUT IT'S ME GIVES AN ERROR MESSAGE "YOUR VOLUME CONTROL PROGRAM IS NOT INSTALLED" I FIXED USING XP DISCS, BUT IT IS NOT YET HERE. THIS IS PART OF THE OPERATING SYSTEM. I HAD ALSO LOST MY CALCULATOR AND GAMES. I HAVE RE-INSTALLED CALCULATOR AND ACCESSORIES SINCE THE ORIGINAL DISC GAMES ARE BACK BUT STILL NO VOLUMN CONTROL. ANYONE KNOW WHAT THEN?
The sndvol32.exe file is one of 3498 files that are monitored by the Windows File Protection System (if it works).
Assuming that your volume control was previously working and you have uninstalled not really things...
Even if you manually delete c:\windows\system32\sndvol32.exe, Windows File Protection should quickly and silently substitute a backup copy and put a message similar to the following in the XP system event log:
Event type: Information
Event source: Windows File Protection
Date: 16/06/2010
Time: 11:57:49
Description:
File replacement was attempted on the protected system file c:\windows\system32\sndvol32.exe. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.0.
See the date and time of this event? I just deleted my file sndvol32.exe moments, and it is replaced almost instantly (no necessary CD in XP), so so he could go "missing" in the c:\windows\system32 folder and it must be replaced would require an effort unless something is wrong (which it probably is). You can only delete even on purpose.
Calc.exe is similarly - it requires some effort or other malfunction so he could come in fact really missing which means that something is not somewhere - if it worked before.
Why don't search you your system for the file and see if it is in c:\windows\system32 or not. If it's not and it worked before, you have another problem or something is wrong.
Before you try to replace the file that should never be missed in the first place, you must first of all decent scanner for malware (since this problem with the sound control panel is such a common condition of malware),then when the scans are complete and clean, difficulty of problems.
Do a few scans for malware, then when it's over difficult problems:Download, install, update and do a full scan with these free malware detection programs at:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/They can be uninstalled later if you wish. -
Bose and microphone volume control does not not with 3.5 mm adapter lightning
Is it possible to do the volume control button and the microphone works with the adapter supplied with the iphone 7?
Try to go to apple and see what they say because you might need new wireless headphones or those that fall into the adapter of the lightning.
Hope this helped you a bit.
-
Satellite Pro P300 - problem with volume control
Hello
I have a problem with my volume control. He worked for the first two months of use value, but now refuses to lower the sound.
He sort of stutters and actually transforms the sound upward when you turn, he 'left' to drop.I markets DEAMS it is a digital control and therefore is not a point 'end' like other laptops. I also noticed others are experieicing this problem.
Is there a solution to this problem? I don't really like having to manually click on the volume control in the status bar on the window in order to be able to turn the laptop down. Maybe someone can help me?
Thanks in advance.
SamHello
In your case, I recommend reinstalling the audio driver and controls (with Win XP) Toshiba or Toshiba VAP (if Vista is installed).
In addition, you should check if the BIOS can be updated too.Sorry for this suggestion, but in my opinion that the question must be related software and the fact is that driver sound and the VAP multimedia button controls and the sound card.
It of certainly worth a try
-
The volume control on the Satellite Pro A200 with Ubuntu 7.10
I have a Satellite Pro A200GE-1F9, I did recently to dual boot with Vista and Ubuntu 7.10. It's the first time I used Linux and most things are going well so far.
However, the volume control (a wheel at the front of the laptop) does not control the volume correctly with Ubuntu, rather than increase the volume smoothly as with Vista, it increases in a 1/8 of maximum volume jumps, the on-screen volume control is always smooth. I think that it is at least partly due to the change of a material volume wheel, as with the latest Toshiba, I have used, for a version of software based. It controls the system volume and runs continuously, without stop at maximum or minimum volumes.
Does anyone know how to change this change in volume for a smooth jump?
Thanks for any help
Hello
given that no one here has no idea, nor pilots, nor any information about the driver from toshiba support, nobody will be able to give you some useful information.
Have you ever google and checked the ubuntu forums? According to me, which will bring you closer the source here instead.
So just to start to ask in the ubuntu forums because I think that someone is there who maybe has the same problem as you.I hope that artistry a kind of programmer. ;)
Welcome them
-
original title: the Volume control icon
I did no more than "volume control icon", the error message indicates to be added via "add programs" in the Control Panel, how can I do this?
You are using Windows XP?
This might help: http://support.microsoft.com/kb/319095
And I hope that you have your Windows XP installation disc.
-
I just uploaded my site. But more often with success, for one thing: there is an error message on the contact form. "The server has encountered an error." It's pretty generic, so I don't know why. I checked my page, everything looks good. I understand that the authorized "bug" before using the Contact form only with the catalyst has been fixed, so it must go through the fine. Ideas?
Please consult this document:
https://forums.Adobe.com/docs/doc-3581
Thank you
Sanjit
-
Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem? I use the first CC pro @.
You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.
If the automation keyframe line is missing, you can switch on and off in the menu sequence.
-
Help with Volume control for the video player
Hey!
My video plays and stops correctly on my video player, but I can't understand this volume control. My cursor moves to the way I want it, but the volume does not adjust. Please tell me what is wrong with my code:
slider_1.onPress = function() {}
this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);
}
slider_1.onRelease = function() {}
this.stopDrag ();
}
slider_1.OnMouseMove = function() {}
newPoint = new Object();
newPoint = this ._x
newPoint = this ._y
_root.volume_bar1.globalToLocal (newPoint);
_root.demo_reel.setVolume(-1*newPoint.x);
}
I watched a tutorial and died this code, but of course my own instance names.
Thanks in advance!
use:
paramsF (slider_1, _root.volume_bar1._x, 0, _root.volume_bar1._x + 133 100);
slider_1.onPress = function() {}
this.startDrag (true, _root.volume_bar1._x, _root.volume_bar1._y, _root.volume_bar1._x + 133, _root.volume_bar1._y);
}
slider_1.onRelease = function() {}
this.stopDrag ();
}
slider_1.OnMouseMove = function() {}
_root.demo_reel.volume = this.m * this._x + this.b;
}
function paramsF(mc:MovieClip,x1:Number,y1:Number,x2:Number,y2:Number):Void {}
MC.m =(Y1-Y2) /(x1-x1);
MC.b = Y1 - mc.m * x 1;
}
-
Satellite U300 - strange problem with volume control wheel
I bought a U300 last week and I find that the volume control wheel doesn't move very easily. It seems that you have to push it slightly to adjust the volume, and when you release your finger, the volume goes in the direction you moved to slowly. Everyone knows this?
In addition, when pressures above the express card slot the housing compresses. This happens on all the U300s?
I would go back to the store I bought in and ask, but I live quite some distance from him so I thought I'd see if anyone here could help first. All responded very appreciated.
Thank you.
Hello
Looks like the wheel is stuck and something around the wheel blocks the volume wheel. I think the best idea is to return the machine as you said, since it s very unusual described what you´ve.
You can also send your machine to a service partner chartered for an assessment of health/repair of equipment.
If you need help to find the one closest to your country, you can use the following link to find some:http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck, welcome and good weekend
-
Graphics of defective screen with keyboard volume control
I have the HP TouchSmart 610-1030y and when I press the buttons volume control on keyboard, instead of the graphic showing the volume control on the screen, all I get is a blank white box. The volume control does not work, it's just the screen icon that is faulty. Can what drivers or software I try reinstalling to resolve this problem? By pressing the buttons volume control on the side of the screen is the same thing. Using Windows 7 64 bit. Thank you.
Software keyboard, screen, is what generates volume graphics, if you head in this direction, you have to solve it.
-
My block of entertainment in Add/Remove programs is empty. Earlier in the week Internet Explorer and MSN were both deleted. I have just the two, but the volume icon does not appear in the taskbar. Followering instructions, I tried to recover but received a message that the volume control program is not installed and do it via Add programs. I don't have a DVD to reinstall. What should I do now?
Hello
I suggest you do a system restore and check whether the problem is resolved. Follow the steps mentioned in the article below.
How to restore Windows XP to a previous state
-
prob with my bar... help plz Volume control
Disappeared from the screen volume control bar. The "speaker" icon is present on the taskbar. The volume control button do not work. But no bar is visible. The laptop is a HP 1060ee G6... can someone help me?
Hello
Download and install the driver of the OSD on the link below
FTP://FTP.HP.com/pub/SoftPaq/sp52501-53000/sp52956.ex
Once the installation is complete, reboot the laptop
Concerning
DP-
-
When installing acrobat 10 on Surface Pro 3, had Error 1006 "the volume for a file has been externally altered', how to fix?
Hi rickyf36983392,
Try to install Acrobat X using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.
Kind regards
Nicos
Maybe you are looking for
-
With 2 pencils of Apple, I guess...
So with the iPad 2 Pro (a 13 ", 10"), but a single case of stylus, I guess I'm either going to 'mark' a pencil so that I know that he is paired with Device13 or Device10 or go through the pairing process, whenever I take the wrong pencil? Not sure I'
-
I plan to replace my hard drive in a Dell Inspiron 6000, OS need?
I think that I searched on and found good info on replacing the hard drive itself and some of the "limits" of GB size/use... (137 GB) He was my son (RIP), laptop and I would like to make it work again. Long gone are my CD of installation so I, guess
-
How can I synchronize my Pentecost Windwos Live Calendar via Nokia Ovi Suite nokia phone
Original title: Windows Live Kalender How can I syncronice my Pentecost live kalender nokia phone via Nokia Ovi Suite
-
Update Vista Home Premium to Vista Ultimate CD.
When I first bought Vista Ultimate it came with a contract for upgrading other systems to home premium so I did it on my laptop. Installation of Home Premium is released the CD of Vista Ultimate. Now I have 7 on my desktop and I would use the Vist
-
BlackBerry® Q10 reconcile email on device vs. Desktop
Hello. I need to know how to set my settings so that when I delete a message on my device, the message remains on my computer from desktop/Inbox. I looked at every possible way, founded for having parameters with my oyhter BBs, but I can't find any