Error on the starting node

Similar Questions

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• CD-ROM error at the start after replacing the DVD drive - Qosmio F20-574

  OK, so I have a Toshiba Qosmio F20/574 and I am trying to replace the factory DVD player (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD Im reader get a CD-ROM error at startup. The only time where what I don't get, is when I start with the factory DVD player.

  Here are the things I've tried...
  -Cleared CMOS memory
  -Remove the bezel to ensure his grip at bottom
  -l' utility EEPROM set the drive to slave.
  -tested the portable player in another
  -uninstalled the factory dvd player via the Device Manager and tried to boot with the new dvd drive

  Here are the things that I found bizarre...
  -in the BIOS (BIOS 1.30 ACP) under IO device, it shows the hard drive and cd, but it is not listed by name, his watch only the IRQ of the primary and secondary IDE controller (integrated drive HARD IDE primary (1F0H/IRQ14), CD-ROM (170 H/IRQ15) secondary IDE). This does not change, even if I start without a DVD player.
  -There is no update available for this laptop BIOS. It is a Toshiba of the Japan and the Ive tried using Qosmio F20 BIOS 1.40 to another region, but this does not work.
  -I can't find a firmware for the Liteon DS-8A1P (CX17) update

  I can't think of anything to try. I really need help! Any ideas?

  I'm afraid that you are using the optical disc drive not compatible and there is nothing you can do. Check it please s user guides document for your model of laptop and you will find a list of all compatible ratings.

• Satellite A100-590: PXE error at the start of the CD

  Hello

  After searching for hours on google and other places without finding any helpful response, I decided to ask here. I hope someone here can help me out.
  I have a Toshiba Satellite A100-590, and I am trying to install Windows XP Pro SP2 MSDNAA from a cd. But whenever I try to boot from it, I get the following error message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  and it starts the already installed Windows XP Home Edition. On several boards of people say that this is caused by the boot loader tries to start from a network and not being able to find a server to boot from. I tried all the stuff like setting up LAN to the last item in the startup list, but nothing helps... any suggestions?

  Thanks in advance.

  Hello

  The PXE error occurs if the device tries to start first on the LAN.
  I put t know how you boot from the CD, but I recommend to change the boot order in the BIOS. LAN Boot option must be set at the end of the order and the CD at the beginning.

  Check it out.

• Error - no system disk or disc error at the start of the Windows XP computer.

  Original title: I can't switch the power on password.

  I turn on my laptop and I am F10 = Rom Based setup, I press F = 10 and it gives me power on password, I get my password and it gives me disc not system or disk error replace and strike any key when ready. What is my next move. Thank you.

  Hi papajoes,

  You did it all change hardware or software on your machine before this problem?

  This problem may occur if your boot device (for example, a floppy drive, hard drive or CD-ROM drive) does not contain startup files.

  You can follow this link & check if you are able to start correctly on the desktop.

  Error message when you start your computer with a non-system disk

  Reference: How to fix a computer that does not start

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Several errors at the start of Vista

  These are my mistakes immediately after the computer starts:

  IM32FAX. DIL not found
  Printer card Transfer Monitor has stopped working
  Interactive Services dialog detection... Runtime error c:\windows\system32\spoolsv.exe...application asked to terminate in an unusual way

  Also: My HP Advisor Total does not start

  Can anyone help with corrections?

  Hello Lulu4

  Try to uninstall then reinstall your printer software.

  You can also try to clean boot to find which exact program is causing the problem for details click on the link below

  http://support.Microsoft.com/kb/331796

  But first try to uninstall and reinstall the printer software. Nothing is impossible... Deepak M

• : Error at the start of the disk system check "Windows is unable to read the disc.

  Original title: Probem with Partition

  My laptop has a 'C' and 'E' of the hard drives. The system works on 'C' drive 'E' is mainly used for personal files/documents/pictures/etc.. For some reason, the 'E' drive is unreadable/corrupted. The properties option displays no space left "ALL BLUE". The check disk option does not work and it says that Windows cannot read the disk.

  I don't know what happened. One minute, he was working, then it is not.

  Ideas and solutions will be appreciated.

  Moreover, from the computer goes straight to the disk check. Loads of messages about unable to read are displayed.

  I am running Vista SP2 on a Toshiba Satellite Pro.

   
  Hi Louis Harrison.
   
  1. what exactly happens when you open the E drive?
   
  Try these steps and check the result.
  Step 1: Check the permissions on E:
  a. Click Start, click computer.
  b. right-click on E:, and then click Properties.
  c. click on the Security tab, select your username under "names of users and groups" and check if it has "Full control" if she's not here, and then give full control access.
   
  Step 2: Look for disk errors
  a. see check your hard drive for errors
  b. restart the computer and check the result.
   
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AppData/Roaming/wushep.dll - I get this error at the start of my computer. What is a wushep.dll that the computer says that I'm missing?

  When the computer starts, he says that the C drive is missing a wushep.dll.  Where can I get a wushep.dll?  There is no virus on the computer and all the programs run normally.

  Hello
   
  Welcome to the Microsoft Community Forum.
  It appears from the description, you get code error message "wushep.dll" when you start the computer.
  To better understand the question, answer the questions below.
  1. Exactly when you receive this error message?
  2. Are you able to start on the computer?
  3. You did changes to the computer before the show?
  For now, you can try the troubleshooting provided steps and check if that helps resolve the issue.
  Method 1:
  Step 1:
  Safe mode
  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed for OSB are installed
  For more information about Safe Mode, see the link:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode
  Step 2:
  Clean boot
  To help resolve the error and other messages, you can start Windows Vista, Windows 7 or Windows 8 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135?WA=wsignin1.0
  Note:
   
  Check the step 3 in the article to start the computer in normal mode.
   
  Method 2:
  SFC scan
  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. For example, some Windows functions may not work, or Windows may crash. The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.
  For more information on how to perform the Scan SFC in Windows 7, see the link:
  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833
  I hope that using information provided!
  Keep us informed if you have any questions/comments related to Windows.

• IDE #1 ERROR at the start of Satellite Pro 2100 Series

  Hello... I'm an IDE #1 ERROR displayed at startup of the computer. My CD/DVD player does not seem to be recognized (in the Device Manager the drive is not displayed) and certainly does not at all. I have installed a new CD/player player, this is the original factory supplied.

  In addition, another clue is when I press one of the dvd control buttons on the front of the pop window - next up will appear:

  "The setting of the drive in Toshiba controls is false. If the audio and video control buttons do not work. Please select the correct drive letter.for the internal CD/DVD drive.

  However on the drop-down list there is no drive letter for choose!
  Any help would be gratefully receieved. Thank you, Matt

  HI Matt,

  It seems that your IDE controller is damaged. To ensure the safety of reading, you should recover the laptop with the Toshiba recovery Image and if the failure is on a new system of fees, the IDE controller is bad!

  It may be possible that only the IDE cable is loose, but to kow that it would be better to put the laptop to a Toshiba Service partner!

  To bye daniel

• DAQmx error at the start of task-50103

  Hello, I would like to acquire the data of two lvdt.
  I use a same programming for the two lvdt.
  the different with the two lvdt is in the selection of the entry,
  the mistake of saying at the beginning. I'm trying to make a new
  DAQmx start task, but he also recalled the same thing once again that
  a further task to start. could someone help me please
  so I can start to measure these two data using LVDT.
  I've also attached the program I made.
  Thank you

  LabVIEW version: 7.1
  sensor: LVDT
  Connector: SCB-68
  DAQ CI - MIO 16th-01

  Thank you very much
  now, I got what you mean
  

• I get this error at the start: could not find capable video game modules

  I need help. After the installation/upgrade to CC PP 2015, I get this error message at startup:

  capable video game modules is not found

  Do you have any suggestions?

  I did everything I can find on this subject.

  1 graphics card automatic switching in System Preferences/Energy Saver unchecked

  2. updated my NVIDIA CUDA software to the version of the driver 7.0.52

  3 trash my preferences Pro first

  All my other apps CC will launch and operate correctly.

  My presentation:

  MacBook Pro (retina, 15 inches, mi 2014)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB

  Graphics card: NVIDIA GeForce GT 750 M 2048 MB

  Hi Mary,

  Thanks for all the information. It indicates that something is inconsistent with your user preferences. Follow these steps:

  • First Pro CC, CC 2014 or 20141 freeze at startup or crashing everything working (Mac OS X 10.9 and later)
  • Run repair permission to drive on the boot under 'Disk Utility' drive and restart the computer

  Thank you

  Regalo

• Error message at the start of "RunDLL" entry missing what it means and how do I solve this problem? Please notify.

  my computer gives me an error at the start of Windows\system32\spool\drivers\W32X86\DLCJtime.dll "entry missing RunDLL" in addition, my Windows XP screen changed on its own after this message began to appear. Instead of getting the original Windows XP sign - on, it gives me a black screen with a box for the username and password.

  Please help.

  Bonita

  Dell printer?  See http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=jm&l=en&s=gen&docid=DSN_28E393B4B4A5ADEEE040A68F5B2849AA&isLegacy=true

• Is this OK to run the utility on the active node TimesTen ttMigrate?

  Hello

  I heard that it is not a good idea to run the utility on the active node TimesTen ttMigrate but I saw no logical technical or a document explaining why?

  When you get a chance, please let me know.

  Thank you

  Sunil

  I guess you're referring to the execution of ttMigrate - a or c - to export one or more tables in an external file?

  The active node is usually much more heavily loaded than the day before and more sensitive to disturbance by activities such as an unloading of big data. In addition, according to the options that you use (or not use) with ttMigrate you will lock entire tables or hierarchies table whole even while the ttMigrate works and this could be very disruptive to applications running on the back-end database and could lead to timeout lock etc. Replication takes his retirement automatically for this kind of error if you run the ttMigrate on the starting node you will not impact on applications and you'll have only a relatively small impact on replication.

  If you do not want the sensation exported 100% transactional consistency (assuming that there are DML activity going on against the exported table) then you can use instead

  ttBulkCp o with the option - noForceSerializable to avoid any impact on the application to access the table.

  Chris