CD-ROM error at the start after replacing the DVD drive - Qosmio F20-574
OK, so I have a Toshiba Qosmio F20/574 and I am trying to replace the factory DVD player (TEAC DV-W28E) with a Liteon DS-8A1P (f/w CX12). With or without a DVD Im reader get a CD-ROM error at startup. The only time where what I don't get, is when I start with the factory DVD player.
Here are the things I've tried...
-Cleared CMOS memory
-Remove the bezel to ensure his grip at bottom
-l' utility EEPROM set the drive to slave.
-tested the portable player in another
-uninstalled the factory dvd player via the Device Manager and tried to boot with the new dvd drive
Here are the things that I found bizarre...
-in the BIOS (BIOS 1.30 ACP) under IO device, it shows the hard drive and cd, but it is not listed by name, his watch only the IRQ of the primary and secondary IDE controller (integrated drive HARD IDE primary (1F0H/IRQ14), CD-ROM (170 H/IRQ15) secondary IDE). This does not change, even if I start without a DVD player.
-There is no update available for this laptop BIOS. It is a Toshiba of the Japan and the Ive tried using Qosmio F20 BIOS 1.40 to another region, but this does not work.
-I can't find a firmware for the Liteon DS-8A1P (CX17) update
I can't think of anything to try. I really need help! Any ideas?
I'm afraid that you are using the optical disc drive not compatible and there is nothing you can do. Check it please s user guides document for your model of laptop and you will find a list of all compatible ratings.
Tags: Toshiba
Similar Questions
-
Backup failed with error 18: the backup drive is not found
Hello
My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.
So far I have tried:
-Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac
-Remove TimeMachine.plist and restart my mac
-Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).
I share this time capsule with my wife and she has no problem with that.
I can only think of a possible alternation I did which could cause this problem.
Because of unstable WiFi problem, I had deleted
com Apple.Airport.Preferences.plist
com.Apple.Network.identification.plist
NetworkInterfaces.plist
Preferences.plist
or other files and reboot my mac * before * I had this problem with time capsule.
However, this is not the first time I do it, and it wasn't a problem before...
This could be the reason? If so, how to restore the network settings?
Please help me with this problem. Really appreciate!
Ted
Here is a copy of the Console:
24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup
24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)
24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.
24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21
24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup
24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
What model is the TC?
Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.
(You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).
Also give me some screenshots of the TC installing airport utility.
Can you get it in the Finder?
-
replace the dvd drive pavillion 1157
The DVD in my HP Pavilion p7 player - 1157c is having a problem reading the CD/DVD, once they are placed in the drawer. That's what I've done so far:
- I reinstalled the cables although they were not cowards.
- Uninstalled the DVD driver and restarted the computer and Windows 7 64 b reinstalled the driver.
The drawer will always open and close and makes normal sounds when you first insert a CD, but it stops after a few seconds.
After that these things did not work, I decided to buy a replacement for the CD/DVD drive last night and went to install it this morning but it seems that the power supply works in the way and I can't get the DVD player. Y at - it something for the old DVD out without removing the power supply? I'm usually not mechanically challenged but this has me confused.
Thank you very much
Hello
The optical drive can be removed at the front of the PC - see the guide on the following link.
http://support.HP.com/us-en/document/c02905554
Best regards
DP - K
-
Get several errors in the hard drive and the slowness of the system XP
COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.
* original title - mistakes, mistakes, mistakes and Everwear *.
COMPAQ Evo N600c, has a lot to a lot of errors on the hard drive. Slow to load, slow to respond to commands, sites will freeze in the middle of the operation. A way to clean the system of mistakes without having to spend money (amount X). ? Ran, Anti - Virus, also hard drive cleaner and have Windows SP3 update. Thank you, Thomas,.
Please be specific on what you mean by "far from many errors on the hard drive." What kind of mistakes? Do you mean the drive read errors? Please quote the error message you get exact, verbatim.
How many mistakes is "too much"? How many times they do they happen? They occur only when doing certain things or anything?
If you really get a lot of the drive read errors, the drive is defective and must be replaced.
But if you're talking about freezing, slow, etc. This is another question entirely, and I wouldn't call it 'errors on the hard drive. The little info you provided the mind, it is difficult to know what this problem is, but one of the things these days plussusceptibles is malware infection. What antivirus do you run (they are far from being just as good, and some of the most popular are among the worst). Do you also run an anti-spyware program? If not, it's * very * likelythat you are infected. I recommend that you download and run the free MalwareBytes AntiMalware to http://www. Malwarebytes.org/products/malwarebytes_free
-
How to replace the DVD drive on a series of Satellite?
Could someone give me instructions how to replace the DVD drive?
I unscrewed a few screws in back and two under keyboard and I still can't get out.
Any suggestions?Thank you
Select this option.I found it!
It's the single screw! It is under the flap of the memory.
-
replace the dvd drive omni 200
I found the info for a 200 MS, but need instructions to replace the dvd drive in my HP Omni 200 5480. or where to find it.
Please, I beg you!
Hello
There is a HP guide (including a video preview) to replace the optical drive on the following link.
http://support.HP.com/us-en/document/c02162108
Kind regards
DP - K
-
My laptop does not recognize the DVD drive or an external USB DVD drive.
My laptop does not reconise the integrated DVD or an external USB, DVD player. But if I set the BIOS to let the laptop for the start of the DVD player and the DVD player worked fine. He could read the disc. Once, I deleted the program Nero of the system and I don't know if some Windows file has been corrupted.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html===================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please make all underneath the same if you have done some before as is often
the set of operations that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device.
The driver tab - click on update drivers (this will probably do nothing) - then do a RIGHT CLICK
the reader - UNINSTALL - REBOOT this will refresh the default driver stack. Even
If the drive appears not to continue below.
Then, work your way through these - don't forget the drive might be bad, might
having a cable loose or slight corrosion on the contacts (usually for a laptop) and
other questions.Your CD or DVD drive is missing or is not recognized by Windows or
other programs
http://support.Microsoft.com/kb/314060Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other
programs - a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that
you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the
Setup Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then check
in both ends of the cables. Remove and replace, do not just tight. For portable computers, you can
Often, clean power and contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the system
Designer and manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case
(Read burn CD & DVD and CD and DVD). So it is not unusual for 1 or 2 pieces
No function while others do so properly.Did you follow the Troubleshooting Guide for the reader who still does not work? He
are some registry entries that do not fix the resolution of problems and those who "might".
be the cause.Check with your system manufacturer Maker and possible device for two firmware
updates and the correct registry entries for your car.Here are the keys in my opinion, are those in question - for the CD/DVD drive - sub
the key of course because there will be other subkeys in these keys. Do not forget to ask specific
involved as well as the settings key.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a restore
Point before you change anything whatsoever) - find the DevManView device and then right click it open in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager,
that displays all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Windows 7 will not recognize the dvd drive
Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.
It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.
It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?
What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?
Hello
If the drive is viable:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
CD/DVD drivers are missing and my system is not able to detect the dvd drive.
Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
Thank youHello
1st reboot and watch again in Device Manager:
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem
Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?
The DVD player worked before HARD drive went bad now, it won't work.
And I just replaced the HARD drive, but now cannot load an operating system that he...
Help, please...
Hi dynamitenews
1. are you able to boot to the desktop?
2. what happens when you try to start the computer?You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.
Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questionsIf nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
BIOS WARNING-
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.I hope this helps.
-
Satellite Pro 4260: How to remove the DVD drive?
I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
Does anyone know how? Is there a manual with available how?Thank you
Hello
This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM driveWell, I think that it of not easy for a person without experience.
So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;) -
Windows does not recognize the DVD drive at startup
Laptop: Dell E6410 ATG wt / verzion A15 Bios
OS: Windows 7 SP1 with the latest updates.
The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.
This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.
Thanks in advance for any help.
I guess that this must be a hardware problem then.
Seems odd.
The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.
-
Satellite Pro U400 - 24 - crack appeared in the frame above the DVD drive
I have a fairly new Satellite Pro U400 - 24 hours (seven months), where a crack appeared just above the DVD drive, close to the screen where the slot ends. I know for sure that I havn't dropped it, so I just want to know if it is a problem that everyone knows? If the framework becomes fragile due to heating (it's pretty warm when he must preform)
Hey,.
I put t really know why this happens, but on my Satellite U400 I couldn t notice such a problem. I have a year now and it works perfectly and the case doesn't have a crack or something.
In my opinion, you should contact an authorized service provider. Guys can order a new replacement part and swap it for you! :)
-
Equium L20-264 - how to remove the DVD drive?
Hello
I try to replace the DVD drive on this laptop and removed the setscrews on the base, but he didn't budge.
There is another screw somewhere? I know that some have their screws under the keyboard, but that would need more than one? I also have a Satellite 350 and I took it easily by removing the screws located at the base.
Any help would be appreciated
Hello
Please, check here
http://www.irisvista.com/tech/
It can help you
-
Aspire 5740g and the dvd drive does not appear in 'my computer '.
I had to have a new installed hard drive I got an error message saying old default disk.
I also had a clean install of windows 7 that I was uncertain if my discs that I created would be ok.
So I have not all the gifts that have been installed on the laptop like new. Now, I find that the dvd drive is not displayed in my computer and nothing happens when I insert the disc.
This has happened a couple of days and I did a restore of the system to a previous restore point. Does anyone know how to solve this problem.
I also do not have the secure egis - any ideas how to get this back
Then... your DVD is probably defective.
did you check in the BIOS if it is listed on bootable devices?
Press F2 at startup, if it is not listed, it is defective.
Maybe you are looking for
-
My windows search service is not running. How can I solve this problem?
My tab search in Microsoft Outlook does not work. When I researched a problem (solution), the response was: Windows Search service not running. I need to get in my box of reception and elements for specific emails and its taking me huge amounts of ti
-
CN557A: Parts for CN557A
Hello I need to find a back cover replacement for a HP CN557A (the cover that is directly under the help of the product labels and serial number. I have tried to look on the HP part surfer, but cannot find the component. Can anyone help? Thank you Mi
-
I saw this question posted several times here, but I can't find someone who has exactly the same problem I have. This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which
-
Windows does not recognize the Powershot A85 digital camera
my camera is plugged in the Device Manager it is said that it works correctly, but it is not recognized by my windows 7 ultimate can someone help
-
BlackBerry Smartphones BlackBerry Storm RAM maximum?
Hello What is acailable from maximum RAM to a BlacBerry Storm 95 requests? Thanks, Merle