Error: ORA-01841: (full) year must be between-4713 and 9999 and not 0
Hi - I get error ORA-01841 ((full) year must be between-4713 and 9999 and not 0) because of the following line in my where clause:
AND p_run_date < ((add_months (ip. insured_plan_termination_date,,13) nvl), to_date (31-DEC-9999. ' ' DD-MON-YYYY '))
I look and what I read speaks not to compare the strings that contain dates, but that is not the case here. p_run_date is without a doubt a date. I've hardcoded even on a specific date, and I still get the error.
Any help is greatly appreciated.
Thank you
Christine
Hi, Christine.
What is insured_plan_termination_date when you get the error? If it's December, 9998 or later version, you cannot add 13 months, which would put the year beyond 9999, everything as the error message said.
You said p_run_date is without a doubt one DATE, but what about insured_plan_termination_date?
It would really help if you could post a test script complete (including CREATE TABLE and INSERT and your complete query instructions) so that people can recreate the problem and test their ideas.
Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?
Tags: Database
Similar Questions
-
ORA-01841: (full) year must be between-4713 and 9999 and not 0
I get the error when I run the following. ORA-01841: (full) year must be between-4713 and 9999 and not 0
Fiscal_Year = 2011
When I run the query.
Select * from gl
where gl_date > = to_date ('01 - SEP-|) FISCAL_YEAR-1 "," MON-DD-YYYY")
AND gl_date < = to_date (31 - AUG-|) FISCAL_YEAR', 'DD-MON-YYYY')
Gl_date is of date data type
Published by: 893185 on April 6, 2012 11:04
Published by: 893185 on April 6, 2012 11:04893185 wrote:
It gives invalid numberThe operators | and - have the same priority level, if
SELECT * FROM gl WHERE gl_date >= TO_DATE ( '01-SEP-' || (fiscal_year - 1), 'DD-MON-YYYY') AND gl_date <= TO_DATE ( '31-AUG-' || fiscal_year, 'DD-MON-YYYY');
Concerning
Peter -
Help on the ORA-01841: (full) year must be between-4713 and 9999 and not
While in the console f? p = 4050 connected in internal/admin in Home-> manage workspaces-> manage developers and users
Download "ORA-01841: (full) year must be between-4713 and 9999 and not 0" when you try to change a user.
Unable to reset the password or modify an admin user.
This just started 2 weeks ago.
Using Application Express 4.0.2.00.06.
Someone has seen this.I heard of a problem due to a problem with the PASSWORD_LIFE_TIME. Worth giving a try:
Solution
The apex_admin app, navigate to home > Service Management > security then enter integer values for:-Lifetime account password (days) - enter 11688, for example
-Apply the changes. -
control the file as follows:
load data
INFILE *.
insert into table test1
Fields ended by ',' optionally surrounded "" "
(id, time_date ' to_date (: time_date, "YYYY-MM-DD HH24:MI:SS)")
begindata
"1," 2007-07-18 00:00:00.
2, "2017-07-18 00:00:00"
the structure of the table:
create table test1 (int id, date time_date);
I'm waiting for your ansers!
Hello
seems to be a problem with your file, check on Notepad, the value of the column was enclosed in double quote not 2 times the apostrophe...
load data
INFILE *.
insert into table test1
Fields ended by ',' optionally surrounded "" "
(id, time_date ' to_date (: time_date, "YYYY-MM-DD HH24:MI:SS)")
begindata
1, "2007-07-18 00:00:00.
2, "2017-07-18 00:00:00.
HTH
-
I'm using SQL * Loader in Oracle 11.2.0.1. I am really puzzled why some files (of thousands) in my. Produce CSV files:
Sheet 5: Rejected - error on the table IMPORT_PLAYERS, BIRTHDATE column.
ORA-01841: (full) year must be between-4713 and 9999 and not 0
Accounts really made the impression that they are the same as all the rest.
The controlfile is quite simple:
load data
INFILE ' / tmp/test/test.csv'
in the import_players table
fields ended by ',' optionally surrounded "" "
TRAILING NULLCOLS
(player_id, tank,
char name,
last_name char,
tank position,
whole first_season
whole last_season
whole h_feet
h_inches float,
integer weight,
college tank,
Date of birth DATE "YYYY-MM-DD HH24:MI:SS")
Here is a sample of the. CSV, which has two records of 'bad' - I have bolded the records that cause problems:
BAILETO01, Toby Bailey, G, 1998, 1999, 6, 6, 213, University of California - Los Angeles, 1975-11-19 00:00:00
Jimmie Baker, BAKERJI01, F, 1975, 1975, 6, 9, 220, University of Hawaii, 1953-12-25 00:00:00
BAKERMA01, Mark, Baker, G, 1998, 1998, 6, 1, 175, Ohio State University, 1969-11-11 00:00:00
BAKERNO01, Norm, Baker, g., 1946, 1946, 6, 0, 180, 1923-02-17 00:00:00
* BAKERVI01, wine, Baker, F, 1993, 2005, 6, 10.5, 232, University of Hartford, 1971-11-23 00:00:00 *.
BAKERMA02, Maurice, Baker, g., 2004, 2004, 6, 1, 175, Oklahoma State University, 1979-07-28 00:00:00
BalkmRe01 Renaldo Balkman, F, 2006, 2009, 6, 8, 208, University of North Carolina, 1984-07-14 00:00:00
BALLCE01, Cedric, ball, F, 1990, 1990, 6, 8, 210, University of North Carolina at Charlotte, 1968-04-16 00:00:00
BALLAGR01, Greg, Ballard, F, 1977, 1988, 6, 7, 215, University of Oregon, 1955-01-29 00:00:00
BELLRA01, Bell, Raja, g., 2000, 2009, 6, 5, 215, Florida International University, 1976-09-19 00:00:00
BELLWI01, William, Bell, G, 1959, 1960, 6, 0, 180, North Carolina State University, 1932-09-13 00:00:00
* BELLAWA01, Walt, Bellamy, c., 1961, 1974, 6, 10.5, 225, Indiana University, 1939-07-24 00:00:00 *.
IRV, Bemoras, BEMORIR01, f., 1953, 1956, 3, 6, 185, University of Illinois, 1930-11-18 00:00:00
BENBOLE01, Leon, Benbow G, 1974, 1975, 6, 4, 185, Jacksonville University, 1950-07-23 00:00:00
I don't really see what's the difference between these and other documents. DATE formats look good and adjust the format of the image that I gave. No special characters - I even copy and paste these files into a new file and I still have this strange error.
Tried to change the format of DD-MM-RRRR, but it made no difference.
The DDL table is:
create table import_players)
player_id varchar2 (15).
first name varchar2 (30),
VARCHAR2 (30) last_name,.
position tank (1),
whole first_season
whole last_season
whole h_feet
h_inches float,
integer weight,
College varchar2 (50).
Date of birth
);
I'm sure it's something very obvious but... I hit my head for a while now and can't see the problem. Any ideas?Hello raindog.
By specifying the data type of the float in the file control prevents the decimal is interpreted correctly. By removing the data type and therefore have SQL * Loader present Oracle a string instead of a float, Oracle will then force a data conversion and data will load. I would like a little further to determine how to use the type of data in the control file so that Oracle is provided the already converted value research.Hope this helps,
Luke -
ORA-01841 year must fall between-4713 and 9999
Hello
I try to make simple plsql function and I get this error.
create or replace function biorytmy (d_urodzenia varchar)
Return number
is
number of v_ile_dni;
BEGIN
Select to_number (sysdate - (to_date ('d_urodzenia', ' yyyy/mm/dd'))) in the double v_ile_dni;
Return v_ile_dni;
END;
/
Any suggestions?
Paul
Hello
2877737 wrote:
Thx for ansers, then how I can insert the number of days variable and use it as number later?
Paul
Have you seen answer #2 above?
If you want that the function always returns an integer, use TRUNC (SYSDATE) instead of SYSDATE.
You can use a function like this in an INSERT statement. If you have trouble, after the INSERT statement.
-
sqlldr and DATES NULL error ORA-01841
Dear all,
I'm fighting to load a table when the data file contains NULL values for the date value. I get the following error:
Sheet 1: Rejected - error on the table W_PARTY_PER_D column BIRTH_DT.
ORA-01841: (full) year must be between-4713 and 9999 and not 0
Thanks for the pointers, detials below:
My control file is:
load data
INFILE ' / media/sf_timv/w_party_per_d_40pc.csv'
in the w_party_per_d table
fields ended by ',' optionally surrounded "" "
(ROW_WID,
BIRTH_DT DATE "YYYY-MM-DD HH24:MI:SS" NULLIF BIRTH_DT = BLANKS.
DATASOURCE_NUM_ID,
EDUCATION_BCKGND_NAME,
INTEGRATION_ID,
MARITAL_STAT_NAME,
SEX_MF_NAME)
The table schema:
create the table TTUSER. () W_PARTY_PER_D
ROW_WID NUMBER (38) DEFAULT 0 NOT NULL,.
BIRTH_DT DATE,
DATASOURCE_NUM_ID NUMBER (38) NOT NULL,
EDUCATION_BCKGND_NAME VARCHAR2 (50 CHAR),
INTEGRATION_ID VARCHAR2 (80 CHAR) NOT NULL,
MARITAL_STAT_NAME VARCHAR2 (80 CHAR),
SEX_MF_NAME VARCHAR2 (50 CHAR),
primary key (ROW_WID));
And a snip of the data file:
133927080, NULL, 2, NULL, "3-4JDPG7', NULL, NULL
133927081, NULL, 2, NULL, '3-3OEB-14465', NULL, NULL
133927082, NULL, 2, NULL, '3-41FS-599', NULL, NULL
133927083, NULL, 2, NULL, '3-6HGH-5002', NULL, NULL
133927084, NULL, 2, NULL, "3-8JM-287", NULL, NULL
133927086, NULL, 2, NULL, "3-433N-124", NULL, NULL
133927089, NULL, 2, NULL, "3-ANM-1979", NULL, NULL
133927090, NULL, 2, NULL, "3-41G 1-1778', NULL, NULL
133927091, NULL, 2, NULL, "3-41G 1-585', NULL, NULL
133927092, 1970-03-03 10:30, 2, NULL, "3-3IH4-3407", NULL, NULLFields with NULL as the value are not NULL values, they are strings with "NULL" as the value. What you want is to treat filed 'NULL' value with a NULL value. Then use:
load data infile '/media/sf_timv/w_party_per_d_40pc.csv' into table w_party_per_d fields terminated by "," optionally enclosed by '"' ( ROW_WID, BIRTH_DT DATE "YYYY-MM-DD HH24:MI:SS" NULLIF BIRTH_DT='NULL', DATASOURCE_NUM_ID NULLIF DATASOURCE_NUM_ID='NULL', EDUCATION_BCKGND_NAME NULLIF EDUCATION_BCKGND_NAME='NULL', INTEGRATION_ID NULLIF INTEGRATION_ID='NULL', MARITAL_STAT_NAME NULLIF MARITAL_STAT_NAME='NULL', SEX_MF_NAME NULLIF SEX_MF_NAME='NULL' ) {code} SY.
-
My question is - is it possible for me to fix this error at the level of external table definition? Please advice
Here is the data file I am trying to download...
KSEA | 08-10 - 2015-17.00.00 | 83.000000 | 32.000000 | 5.800000
KBFI | 2015-08-06 - 15.00.00 | 78.000000 | 35.000000 | 0.000000
KSEA | 08-10 - 2015-11.00.00 | 73.000000 | 55.000000 | 5.800000
KSEA | 08-08 - 2015-05.00.00 | 61.000000 | 90.000000 | 5.800000
KBFI | 2015-08-06 - 16.00.00 | 78.000000 | 36.000000 | 5.800000
KSEA | 2015-08-07 - 18.00.00 | 82.000000 | 31.000000 | 10.400000
KSEA | 08-10 - 2015-00.00.00 | 65.000000 | 61.000000 | 4.600000
KBFI | 08-08 - 2015-07.00.00 | 63.000000 | 84.000000 | 4.600000
KSEA | 08-10 - 2015-15.00.00 | 81.000000 | 34.000000 | 8.100000
This is the external table script
CREATE TABLE MWATCH. MWATCH. WEATHER_EXT ".
(
LOCATION_SAN VARCHAR2 (120 BYTE),
DATE OF WEATHER_DATETIME,
NUMBER (16) TEMP.
NUMBER (16) OF MOISTURE,
WIND_SPEED NUMBER (16)
)
EXTERNAL ORGANIZATION
(TYPE ORACLE_LOADER
THE DEFAULT DIRECTORY METERWATCH
ACCESS SETTINGS
(records delimited by newline
BadFile "METERWATCH": "weather_bad" logfile 'METERWATCH': 'weather_log '.
fields ended by ' |' missing field values are null
(location_san, WEATHER_DATETIME char date_format DATE mask "YYYY-mm-dd - hh.mi.ss", TEMPERATURE, MOISTURE, wind_speed)
)
LOCATION (METERWATCH: 'weather.dat')
)
REJECT LIMIT UNLIMITED
PARALLEL (DEGREE 5 1 INSTANCES)
NOMONITORING;
Here is the error in the weather_bad which is generated files...
column WEATHER_DATETIME of 55 error processing in the 1st row to the /export/home/camsdocd/meterwatch/weather.dat data file ORA - 01849ther_log.log 55 56 error processing column WEATHER_DATETIME in the row 1 for the /export/home/camsdocd/meterwatch/weather.dat data file 57 56 ORA - 01849ther_log.log: time must be between 1 and 12 58 column WEATHER_DATETIME 57 error during treatment number 2 for the /export/home/camsdocd/meterwatch/weather.dat data file 59 ORA-58 01849: time must be between 1 and 12 60 column WEATHER_DATETIME of 59 error processing 5th for the /export/home/camsdocd/meterwatch/weather.dat data file 61 ORA-60 01849: time must be between 1 and 12 62 column WEATHER_DATETIME of 61 error treatment in line 6 to the /export/home/camsdocd/meterwatch/weather.dat data file 63 ORA-62 01849: time must be between 1 and 12 64 column WEATHER_DATETIME of 63 error treatment in row 7 for datafile /export/home/camsdocd/meterwatch/weather.dat 65 ORA-64 01849: time must be between 1 and 12 66 column WEATHER_DATETIME of 65 error treatment 9 for the /export/home/camsdocd/meterwatch/weather.dat data file online 67: time must be between 1 and 12 My question is - is it possible for me to fix this error at the level of external table definition? Please advice
Yes it is possible. Let's not your date mask. You're masking for 12-hour format when your data is in 24-hour format. Change the mask of your date to be "YYYY-mm-dd-hh24. MI.ss ". Notice the change in "BOLD".
-
ORA-01850: time must be between 0 and 23
Hi techies,.
We have created a procedure for our daily report.its works well for both location.when we run to a location, we end up with this error.our current NLS_DATE_FORMAT is HH24:MI:SS.but its run successfully when we value nls_date_format = .attendu 'DD-MON-YY' other two (which is the same except for one table where it retrieve data via dblink) is to run correctly with NLS_DATE_FORMAT HH24 : MI: SS.
ORA-01850: time must be between 0 and 23
ORA-02063: preceding the line of DW_TO_DIRC. NACALOGISTICS.COM
ORA-06512: at "OTSLGWEB. DAILY_JOB_PROFIT_REPORT_USA", line 89
ORA-06512: at line 1Sameer_appsdba wrote:
3. can we add ' alter session set NLS_DATE_FORMAT = 'DD-MON-YY' inside the procedure?Yes
SQL> ed Wrote file afiedt.buf 1 create or replace procedure p1_nls as 2 dt date; 3 begin 4 execute immediate('alter session set nls_date_format = ''DD-MON-YYYY'''); 5 select sysdate into dt from dual; 6 dbms_output.put_line(dt); 7* end; SQL> / Procedure created. SQL> alter session set nls_date_format = 'DD-MM-YYYY'; Session altered. SQL> select sysdate from dual; SYSDATE ---------- 21-07-2011 SQL> set serveroutput on SQL> begin 2 p1_nls(); 3 end; 4 / 21-JUL-2011 PL/SQL procedure successfully completed.
-
ORA-01847: day of the month must be between 1 and the last day of the month
Hi all
Select
To_date(mDate||) e '|| mtime, "YYYY-MM-DD HH24MISS") meddate
of PR_MOCTEST_TEMP
mDate IS OF TYPE of DATA VARCHAR2 AND mtime OF VARCHAR2
mDate: 07-09-2009
mtime: 131241
mDate IS IN FORMAT DD-MONTH-YYYY
mtime: HHMMS
mtimeOF IS OF TYPE of DATA VARCHAR2 AND VARCHAR2 mDate
mDate: 07-09-2009
mTIME: 131241
mDATE IS IN FORMAT DD-MONTH-YYYY
mTIME: HHMMS
I NEED TO COMBINE THE 2 COLUMNS TO GET THE OUTPUT AS DD-MM-YYYY HH24MISS
AND I AM GETTING THE ERROR;
ORA-01847: day of the month must be between 1 and the last day of the month
where mistaken?
Please notify
KaiYou will find the bad dates using a table of logging of errors:
--we'll try to insert into here, invalid dates will be thrown out create table dst(d date); -- create an error log table dst_err exec dbms_errlog.create_error_log('dst', 'dst_err'); -- try the insert. Will fail with your ORA-01847 insert into dst select TO_DATE(mdate||' '||mtime,'DD-MM-YYYY HH24MISS') from PR_MOCTEST_TEMP log errors into dst_err('comment'); -- view the errors select * from dst_err;
-
ORA-01849: time must be between 1 and 12
Hi all
SELECT SYSDATE FROM DUAL;
Returns
MAY 11, 2011 17:33
SELECT * FROM stables of TIMESTAMP TO_TIMESTAMP (May 11, 2011 14:30 '); Returns
ORA-01849: time must be between 1 and 12
Any idea?
KaiHi, Kai,
KaiS wrote:
Hi allSELECT SYSDATE FROM DUAL;
Returns
MAY 11, 2011 17:33
SELECT * FROM stables of TIMESTAMP TO_TIMESTAMP (May 11, 2011 14:30 '); Returns
ORA-01849: time must be between 1 and 12
Always pass arguments (at least) 2 to TO_TIMESTAMP, like this:
TO_TIMESTAMP ( '11-MAY-2011 14:30:00' , 'DD-MON-YYYY HH24:MI:SS; )
The second argument tells TO_TIMESTAMP what format you use. If you don't pass it, then TO_TIMESTAMP will use a default format, which may not be what you want or expect.
-
ORA-01841 together of the year must be between... .error in order of
Hi all
the calcuation works very well except what order by clause is includedi have this query with me ,when order by clause is included ,when it is removed ,i see the output with so many record counts SELECT porh.segment1, CASE WHEN popr.action_code = 'APPROVE' AND prall.full_name <> 'Sudheer T. Paraputhra' AND grdpr.short_name < 'PS-10' THEN prall.full_name END directman_pr,-----getting names of managers who perform PR approve action porh.description, porl.line_num, CASE WHEN popr.action_code = 'APPROVE' AND prall.full_name <> 'Sudheer T. Paraputhra' AND grdpr.short_name < 'PS-10' AND poph.action_code = 'SUBMIT' THEN TO_NUMBER ( TO_CHAR ( TO_DATE ('1', 'J') + ( poph.action_date - popr.action_date ), 'J' ) - 1 ) END days_pr,------------------------------(calculating days from PR approval by manager to PO submit by user) poha.segment1 po_num, prall.full_name pr_approved_by, popr.action_date pr_approved_date, CASE WHEN poall_apprv.full_name <> 'Sudheer T. Paraputhra' AND grdpo_apprv.short_name < 'PS-10' AND poph_apprv.action_code = 'APPROVE' AND poph.action_code = 'SUBMIT' THEN TO_NUMBER ( TO_CHAR ( TO_DATE ('1', 'J') + ( poph_apprv.action_date - poph.action_date ), 'J' ) - 1 ) END days_po,------calculating days from PO submit action by user to PO approve action by managers popr.sequence_num pr_seq, popr.action_code pr_action, poall.full_name po_approved_by, poph.action_date po_approved_date, poph.sequence_num po_seq, poph.action_code po_action, poph_apprv.action_date po_approved_date_appr, poph_apprv.action_code apprv_action_code FROM po_requisition_headers_all porh, po_requisition_lines_all porl, po_req_distributions_all prda, po_distributions_all poda, po_headers_all poha, po_action_history popr, po_action_history poph, hr.per_all_people_f poall, hr.per_all_people_f prall, hr.per_all_assignments_f asgpo, hr.per_all_assignments_f asgpr, per_grades_vl grdpo, per_grades_vl grdpr, po_headers_all poha_apprv, po_distributions_all poda_apprv, po_action_history poph_apprv, hr.per_all_people_f poall_apprv, hr.per_all_assignments_f asgpo_apprv, per_grades_vl grdpo_apprv WHERE poph.employee_id = poall.person_id AND popr.employee_id = prall.person_id AND poall.person_id = asgpo.person_id AND prall.person_id = asgpr.person_id AND asgpr.grade_id = grdpr.grade_id(+) AND asgpo.grade_id = grdpo.grade_id(+) AND prda.distribution_id = poda.req_distribution_id AND poha.po_header_id = poda.po_header_id AND prda.requisition_line_id = porl.requisition_line_id AND porh.requisition_header_id = porl.requisition_header_id AND porh.requisition_header_id = popr.object_id AND poph.object_type_code = 'PO' AND poha.po_header_id = poph.object_id AND SYSDATE BETWEEN poall.effective_start_date AND poall.effective_end_date AND SYSDATE BETWEEN prall.effective_start_date AND prall.effective_end_date AND SYSDATE BETWEEN asgpo.effective_start_date AND asgpo.effective_end_date AND SYSDATE BETWEEN asgpr.effective_start_date AND asgpr.effective_end_date AND SYSDATE BETWEEN poall_apprv.effective_start_date AND poall_apprv.effective_end_date AND SYSDATE BETWEEN asgpo_apprv.effective_start_date AND asgpo_apprv.effective_end_date AND prda.distribution_id = poda_apprv.req_distribution_id AND poha_apprv.po_header_id = poda_apprv.po_header_id AND poph_apprv.employee_id = poall_apprv.person_id AND poall_apprv.person_id = asgpo_apprv.person_id AND asgpo_apprv.grade_id = grdpo_apprv.grade_id(+) AND poha_apprv.po_header_id = poph_apprv.object_id AND poph_apprv.object_type_code = 'PO' AND poph_apprv.action_code = 'APPROVE' ORDER BY 4, 10, 14
kindly help
Published by: makdutakdu on June 1st, 2010 14:51makdutakdu wrote:
Hellocan u please help me with another query just to calculate the number of days for days_po and pr
Subtract one DAY from another, this will give you the difference in number of days.
SQL> select sysdate 2 - to_date ('01-04-2010', 'dd-mm-yyyy') 3 from dual 4 / SYSDATE-TO_DATE('01-04-2010',' ------------------------------ 62,4078240740741
Remember, however, that the time is always part of a DATE.
-
How to capture the ORA-01850 hour must be between 0 and 23
Hello
The date picker to manually enter any value in the TextField. Well, if a user between 24:00 for the time, the application will fail. I want to handle the error. I have an entry of validation, but of course the to_date conversion fails with the above, EXTRACT function also fails... ideas?
Thank you
Efren
Well, can't do you this validation instead of making to_date?
substr (Trim(:P1_HOURS), 1, 2) > = 0 AND substr (TRIM(:P1_HOURS), 1, 2)<>
-
Hi, forms 6i, db 10g
I created a lov based on this query
select * from items_qty_vu -- database view
and the view code is
CREATE OR REPLACE FORCE VIEW items_qty_vu (serial, item_id, expiry_date, qty) AS WITH item_units_plus AS (SELECT item_id, unit_id, factor, LEAD (factor, 1, 1e99) OVER (PARTITION BY item_id ORDER BY factor) AS next_factor, ROW_NUMBER () OVER (PARTITION BY item_id ORDER BY factor DESC) AS rnk FROM item_units) SELECT ID.serial, ID.item_id, ID.expiry_date, SUBSTR (SYS_CONNECT_BY_PATH ( TRUNC ( MOD (( ID.qty - ID.qty_allocated ), iup.next_factor ) / iup.factor ) || ' ' || u.unit_name, ', ' ), 3 ) AS qty FROM item_detail ID JOIN items i ON i.item_id = ID.item_id JOIN item_units_plus iup ON iup.item_id = ID.item_id JOIN units u ON u.unit_code = iup.unit_id WHERE CONNECT_BY_ISLEAF = 1 START WITH iup.rnk = 1 CONNECT BY iup.rnk = PRIOR iup.rnk + 1 AND ID.serial = PRIOR ID.serial ORDER BY ID.serial;
When I compile the form, I face the error FRM-30187,
If I replace my query "select * from items_qty_view" with "select item_id, serial, expiry_date of items_qty_vu", it compiles successfully.
As salamualikum, Salem,.
You must follow my instructions carefully.
1. Select the record group.
2. go in the record group property
3. Select and open the column specifications
4. highlight the column and check the decrease of the length, the bellows of the size that you cross more than 2000 then 2000.
Compilation of now and you're done.
Wow. you did.
Hamid
-
How to switch a microphone directly between enhanced and not improved?
Calls between Microphone.getMicrophone () and Microphone.getEnhancedMicrophone () on the same mixing unit apparently does not work very well. Choose the following code:
<? XML version = "1.0" encoding = "utf-8"? >
" < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "
xmlns:s = "library://ns.adobe.com/flex/spark".
xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "955" = "600" creationComplete = minHeight "onCreationComplete ()" click = "Microphone.getMicrophone () .setLoopBack (true); ">
< fx:Script >
<! [CDATA]
Import mx.controls.Alert;
private function onCreationComplete (): void
{
Microphone.getEnhancedMicrophone () .setLoopBack (true);
}
[]] >
< / fx:Script >
< / s:Application >
You will be able to hear you speak at first, but as soon as you click on the application, you will no longer be able to hear your voice. I saw this sort of thing in other scenarios.
To make a long story short, if you call getEnhancedMicrophone() for a device, then try to call getMicrophone() for the same device, the device stops providing any audio input. The same is true vice versa. However if you call getEnhancedMicrophone() for one device, then getMicrophone() for a different device, and then return to the first and call getMicrophone() for it, the device will work just fine.
Why? Is it possible to just pass parameters improved and unimproved for the same device, without reaching out to an independent device? Thank you!
On your reference to Microphone, you have these constants that you can assign your options:
As you can see, MicrophoneEnhancedMode.OFF disables the extended mode. You must set your microphone .blog property equal to disable references improved, or use one of the other relevant options to enable it. Therefore, you should always use improved as long as you can turn on or off.
Maybe you are looking for
-
Is it possible to schedule updates of operating system, rather than download them automatically?
-
Hi guys,. I was wondering on what condition the second case structure will be true? I tried a few times to different values of will I gave to elapsed time, looks anything, it will be always false and real state in the second structure case never exec
-
Vista - Error Code: 0X800A01AE (cannot install updates)
Yesterday, I installed a new copy of Biz of Vista on a PC brand new VM VMPlayer. Installation and updates went well. I then tried to install Microsoft Update and it install it; I get the error in the title. I find several questions on the net simi
-
HP Envy 120: 120 black cartridge HP envy does not print
Hello. I run my printer for almost 2 years at home (not a lot of prints, for the most part only the documents and especially only BW print) without any problem. This morning I wanted to print two PDF documents when I realized that the black areas are
-
I have an XY Chart with several Y axis and I want the the Y 3 to align axis grid lines. But I also want to keep the AutoScaling function. Is this possible?