case picker

Similar Questions

• How to create a botton pause to pause a program

  I would like to create a pause button to interrupt the process.

  Then a race that button pressed will continue from where it stopped in..

  My program is attached. .

  I would really like your help. .

  Thank you. .

  Oh and the while loop outside the structure of stacked sequence is so that my program will run when you press the Start button, on the front panel. .

  A simple solution would be to put the code in your loop in the false case of a box structure.  Wire a Boolean 'Pause' to the case picker control and set its text on 'summary '.  Put a little more time in the case of True to prevent it from hogging the CPU during a break and Bob is your uncle.

  Edit - Make sure to set the mechanical action of the Boolean value of Pause to switch when Pressed/released.

• Use tasks without MAX

  Hello everyone, I need your help. Due to some that HE reasons, I can't install MAX on one of my computers in tests. The DJ is a copy of a previous test bench. In the initial testbed, the user had to choose a NI DAQmx task in the application. Now, I want to keep the same working principle. For this reason that I copy the MAX configuration since the original testbed report and paste it on the new computer (the one without MAX). I will read the configuration settings of the .html (tasks, channels, scales, etc.).

  I know that I can use OR-DAQmx Run-Time Engine 9.1 (heart), so I can work without Max (it always was not testicles)

  My problem is, how to do that the user selects a task (unknown number of parameters strangers, channels, etc.) as well as the measurement will take place without problems? If I have not installed MAX, can I use all the DAQmx palette icons?  Thank you

  The_sun

  PS. Y at - it an option to the date of importation of the .nce file?

  Hi The_sun,

  For your situation, it can be a bit tricky to create by the task and program their settings based on the user's selection.  There is a way, although if you can configure all the options of possible task before the program begins. You can use a box structure that allows you to select which task to load based on the case picker control that the user can choose before the time of execution.  What tasks do you intend to have control of the user?  Your front panel may become cluttered with all the selectable settings, but you can program windows to tabs or other methods of organization if you wish.

  You can use all the vi from the palette DAQmx without installed MAX.  The vi is the driver himself, is independent of the application of MAX.

  When you speak with the import of files .nce?  The date of its creation?  My first research and experimentation did not turn anything on the import of a date from this file.

• How to translate the tags for CFScript

  I want to use CFScript 'pure' in my code. There are a lot of problems.

  Tags: < cfinclude to cfscript include

  Tags:

  < cfswitch expression = "#REQUEST. Attributes.Go [1] #">"

  < cfcase value = "error" >
  < cfinclude template="./content/error/_index.cfm"/ >
  < / cfcase >

  < cfcase value = "Pick-up" >
  < cfinclude template="./content/pickup/_index.cfm"/ >
  < / cfcase >

  < cfcase value = "Send" >
  < cfinclude template="./content/send/_index.cfm"/ >
  < / cfcase >

  <!-by default at home. ->
  < cfdefaultcase >
  < cfinclude template="./content/home/_index.cfm"/ >
  < / cfdefaultcase >

  < / cfswitch >

  It works well

  cfscripts:

  < name cffunction 'include' = >
  < cfargument name = "template" >
  < cfinclude template = "template # #" >
  < / cffunction >

  < cfscript >
  switch (' #REQUEST.) ("Attributes.Go [1] # ')
  {
  ("case"error": include("./content/error/_index.cfm ");
  ("case"Pick-up": include("./content/pickup/_index.cfm ");
  ("case"send": include("./content/send/_index.cfm ");
  ("default: include("./content/home/_index.cfm ");
  }
  

  not work well.

  PS: above code (tags) from project eCards Nadel.

  can someone help me? Thank you!

  You need to read the docs:

  Using switch and case statements

  http://help.Adobe.com/en_US/ColdFusion/9.0/developing/WSc3ff6d0ea77859461172e0811cbec0a0e0-7fdf.html #WSB69283B9-CA98-4fdf - 95B 2-80665F57BC82

  Note that the BOX blocks must end with a BREAK.

  In addition, when you ask a question, say something 'wrong' is not much help: you must say how something does not work, for example: it causes an error, or if you see something you didn't expect, etc.  Otherwise, it's a little ambiguous.

  --

  Adam

• I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  I just picked up a 12 inch I have pad PRO and bought a keyboard provided by Apple, however I find that the base remains unstable and keeps the hustle when you type, the seller it says it's a design flaw. Can someone tell me if this is the case?

  find it hard to imagine that Apple could sell these defective products.

  If the seller is an authorized Apple reseller, an independent company,

  You may need to ask you if you could see & try a different product sample

  because you might be looking at something that has a defect.

  {According to the related help page, Type position should be more

  stable to use. However if the keyboard is not flat, this sounds like default.}

  Sounds as if you're not at the official Apple Store (apple retailer)

  but, on the contrary, are somewhere else. Could you give more information?

  Some keyboard accessories are made by third party companies; so

  If the product has an Apple product model number, we note here.

  When considering the purchase of an accessory, it's a good idea to test

  and check in the store before you buy. An official Apple Store has

  a different return policy as an independent reseller of Apple.

  Don't know if I can be useful; These chat rooms are usually Apple

  users of products such as yourself, who have taken their unpaid time

  to see if they can help the other users of the product.

  Good luck...!

• How long can new iPhone purchased be recorded in store for pick-up?

  I want to buy the new iPhone 7 more through the store pick up option.

  My uncle is going to the United States, Vegas - but he'll be there 3 weeks after that the iPhone will be available.

  Is it possible to order the new iPhone using picking up in store option in this case?

  will save them the question for me until he Vienna 3 weeks later?

  Thank you!

  Unless you or your Uncle has a us credit card with an address of billing US, you can do that.

  You can't order online from the US store for pick-up or delivery by other than the United States credit card.

  Nothing has been said yet about internal collection of pre-orders. It can even impossible with a US credit card at the beginning.

  If you want to use other than the United States credit card to buy on the US store, the only way to do is physically go into an Apple Store and buy it there, if it is in stock.

• My facebvook page that I opened was a language different yet AVG is picking up threats! Help please?

  I just went on Mozilla since I use it all the time after that computer has been restored. I'm afraid to use Mozilla now given that the page has a different language on this subject and I have not the Google translator is turned on. Please my AVG antivirus is not picking up the deliberations and I am about to light my Malwarebytes, just in case there is a threat there. HELP help I love the browser and like it better than IE or Chrome. Plese help me

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• WT-310 - need to slip /sleeve case recommendations

  When I bought the WT310-106, I picked up the Toshiba brand for her case as well.
  Unfortunately, then the box seems good and it is well done, the design is poor.

  It does not correctly, wise there is an inch and a half high margin too large to be moved. The sides have only a few inches of elastic in half top, if the lower half of each side is open.

  This means that the lower corners of the Tablet are not properly protected and the tablet can turn in the case. Therefore the lower corners of the case are crushed by now. The other problem is that put a pen in the provided loop push the Tablet askew. Very poor design.

  Recently, I jumped in PC World to see what they had and was surprised by how little computer case laptop 11.6 "fit the 310 (one!).

  If anyone has a recommendation for a Holster that fits the WT310, maintains computer in place, protects the corners, a hard protection to the screen and soft protection to shock as well as a Pocket/loop/space for a pen?

  It will be transported in a Messenger bag with other junk needs to be quite robust but is not waterproof, I use it at work so no Ganja leaves etc.

  Cheers Chaps

  Hello

  the round of Toshiba measures 1.6 x 22.6 x 20.7 cm and its been for 11.8 as well as 11.6 displays.
  I guess an3rd bias for screens of 11.6 sleeve should be compatible with the TOSHIBA Tablet too.

  So I recommend you seek 11.6 sleeve: for example, I found good Internet offer: sleeve leather Supremery

• Do not pick up wifi networks sometimes

  HI, I have an iPhone with the latest iOS installed 6 and I noticed a problem with my Wi - FI.

  Recently, I went to my brother home and could not pick up his Wi - Fi at all while other devices did, it (iPhone 6 also) picked up its network and Wi - Fi hotspots neighbours but I find absolutely nothing.

  I went in a friends house and successfully connected to their WiFi, but I noticed they picked up a few hot spots of neighbours using their iPhone 6 so that I could not find any of them outside my friends wireless, the router is the same room btw.

  I initially thought my case could restrict the Wi - Fi signal so I removed the case and held the two iPhone 6-by-side and searched but only picked up the router that was in the room while another iPhone picked up a couple more mine.

  What could be the problem?

  Edit: I forgot to mention that I tried to reset network settings.

  General suggestions for Wi - Fi problems, maybe one of them will help you...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

• Sony F55 Hard case / Soft

  I just picked up this morning my case F55 of guys in the box and thought I'd share. It's wonderful - made really intelligently. The cut out for the camera fits the plate so the R5. Out of the shelf to the right and there is plenty of space for cables, handshaking etc. I highly recommend them if you need to box your camera safely.

  Can anyone recommend a more gentle/soft case for the 55 size edge? Ideally one that I can fit a laptop in also.

  Jamie

  

  

  

  
  

• Satellite L30 - 11G can not pick up my WLan network

  Hi all

  I have a Toshiba * Satellite L30-11 G * and I use the model of router D-links * (DIR301) * to set up a wireless network.
  The laptop picked up the network before I formatted the computer after that that he has been infected with a virus and became very slow.

  After formatting and reinstalling windows, the laptop can not meet my network.
  I changed the security settings on the router and set it to WEP (which is the very basic setting) for the network. I reinstalled windows (with all updates) for a second time to eliminate and windows problems could be created to activate the network card pick up the network.

  Although the laptop captures the networks of the district with the same security as my router settings it just will not collect my network.

  Can someone help me with this one please? Thank you.

  If I understand correctly, you can connect to the laptop for the neighbours wireless LAN wireless, but you can't connect the laptop to your WLan router.
  Is this good?

  As far as I know, this laptop was equipped with the Atheros 802.11 B/G WLan card.
  In case I would recommend you check if the wireless network adapter and the router use the same Wlan standard.
  In addition, you can try to disable all the security settings on the router.
  I mean disable encryption, SSID hidden settings, MAC address filtering, firewall, etc.

  Try again to establish the WiFi connection. If you're going to succeed then you may reactivate the router settings

• Satellite L300 - 12L is not picking up wireless connection

  I just did a factory restore on a Satellite L300 - 12L sound do not pick up any wireless network.
  Do we know if its material missing?

  Thank you
  Them

  Hello!

  What do you mean with it s not to pick up any wireless connection?
  Can you wireless networks?

  Why wouldn't be a missing material? If your laptop is equipped with a WiFi card (I'm almost sure that this is the case) and you don t have exclamation points yellow in Device Manager that s is not a hardware problem.

  Don t forget WIFI must be enabled with the hardware switch on the computer laptop and FN + F8.

  Good bye

• HP Pavilion 500 - 406 a: thinking of picking up a GTX 970

  I think now to pick up a GTX 970 for my 500-a 406, I think the mother board hold the card in the PCI Express x 16 card, I am correct in saying that?

  I also plan to upgrade the PSU for a Corsair VS550 as the current is not sufficient for the 970.

  Now I guess what my question is, the case of HP Pavilion stock will be able to adapt the card? Or near map editing?

  EDIT:

  GPU: https://www.mightyape.co.nz/product/Asus-STRIX-GTX-970-4GB-Graphics-Card/22831145

  Power supply: https://www.mightyape.co.nz/product/550W-Corsair-VS550-Power-Supply/21557895

  a 500-406: http://support.hp.com/hk-en/document/c04445153

  SquarePony, welcome to the forum.

  SquarePony wrote:
  

  I think now to pick up a 970 GTX (https://www.mightyape.co.nz/product/Asus-STRIX-GTX-970-4GB-Graphics-Card/22831145 ) for my 406-500 a (http://support.hp.com/hk-en/document/c04445153 ), I think the mother board hold the card in the PCI Express x 16, I am right in saying that?  Your link gives me an error message.

  I also plan on upgrading the PSU for a Corsair VS550 (https://www.mightyape.co.nz/product/550W-Corsair-VS550-Power-Supply/21557895 ) that the current one is not enough for the 970.  This should be enough power; 600W would be even better.

  Now I guess what my question is, the case of HP Pavilion stock will be able to adapt the card? Or near map editing?  Is the best way to know if the card will fit, measure the space between the port of return of IO and the front of the case.  Then compare the measurements to the card.  I think it will be very tight.  I have a Phoenix 860-170VR which has an AMD Radeon R9 390 X 8 GB GDDR5 FH GFX.  It is very tight, but fits with room to spare.

  EDIT: fixed links

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Safari 9.0.2 freezes - also picked up adware

  Running Safari 9.0.2 under El Capitan 10.11.2. on MacBook Pro

  1. when I run Safari for the first time after logon, the application crashes (with lollipop) for about 30 seconds and works fine.

  2. separate to that, I seem to have picked up a virus/trojan or something by which if I click a link on a legitimate Web site, another tab will open with some advertising site - ing! AVG sees nothing.

  The best course of action to address these two issues will be remove Safari and reinstall? If so, where one can get the Safari Installer?

  Thank you

  David

  A

  Please remove "AVG Antivirus" (which is worse than useless) by following the instructions on this page. To remove the free version of the product, you may need to download the installer from here.

  Back up all data before making any changes. Never install a software "anti-virus" or "anti-malware" again.

  B

  You may have installed ad-injecting malicious software ("adware").

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Some of the most common types of adware can be removed by following the instructions from Apple.

  If you are not already running the latest version of Mac OS X ("El Capitan"), update or upgrade in the App Store you could adware to automatically remove. Save all data before taking this action. If you are already using the latest version of El Capitan, you can still download the current update of the Apple Support downloads page and run it. Still, some types of malware will be deleted. That's all you need to do in withdrawal may be, but you will still need to make changes to the way you use your computer to protect you from new attacks.

  If the steps above do not work for you, see below.

  This simple procedure to detect any type of adware that I know. Disabling is a procedure distinct and better still.

  Some legitimate software is funded by advertising and may display advertisements in its own windows or in a web browser while it is running. It's not malware and it may not appear. In addition, some Web sites display advertising intrusive popup that can be confused with adware.

  If none of your web browsers work well enough to carry out these instructions, restart the computer in safe mode. Allows to temporarily disable the malware.

  Step 1

  Please triple - click on the line below on this page to select it, and then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + v press return. Open a folder named "LaunchAgents", or you will get a notice stating that the file cannot be found. If the file is not found, proceed to the next step.

  If the folder opens, press the combination of keys command-2 to select the display of the list, if it is not already selected. Please don't skip this step.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. If necessary, enlarge the window so that all the content show.

  Follow the instructions in this support article under the heading "take a screenshot of a window." An image file with a name starting in 'Screenshot' should be saved to the desktop. Open the capture screen and make sure it is readable. If this isn't the case, capture a small part of the screen indicating that what needs to be shown.

  Start a reply to this message. Drag the image file in the editing window downloading. Alternatively, you can include text in the response.

  Leave the case open for now.

  Step 2

  Do as in step 1 with this line:

  /Library/LaunchAgents

  The record which can open up will have the same name but is not the same as in step 1. In this step, the folder does not exist.

  Step 3

  Repeat with this line:

  /Library/LaunchDaemons

  This time the file will be called "LaunchDaemons."

  Step 4

  Open Safari preferences window and select the tab 'Extensions'. If the extensions are listed, post a screenshot. If there are no extensions, or if you cannot launch Safari, skip this step.

  Step 5

  If you use Firefox or Chrome browser, open the list of extensions and do as in step 4.

• How to change the switch case sub - VI for the Subvi all calls

  Hello

  to make the code more elegant and more reasonable, I source code, often called a Subvi. The Subvi is a box structure. If I add new cases of this Subvi thereafter, I must renew all selectors of Enum for the Subvi handmade calls. It's really annoying.

  Is it possible to pair the picker to the slot - VI for a change in the number of cases will affect all selectors automatically?

  Best regards

  Carsten

  Thank you very much. It works just perfect.

  Carsten