Error ORA-28500, DBLink Oracle to Sql Server

Similar Questions

• dblink Oracle to SQL Server

  Hi all
  
  I need to create a dblink, Oracle 10 g to MS SQL Server 2005. I looked for more information on inet to this topic, but I couldn't find a complete article about how to set up a kind of dblink.
  Any of you know where I can read about it? Some article, doc or any source is OK.
  Thank you for the ind...

  This aid cannot:

  use generic connecitivty that ships free with oracle for heterogeneous service.

  http://www.databasejournal.com/features/Oracle/article.php/3442661/making-a-connection-from-Oracle-to-SQL-Server.htm

  http://www.Oracle-base.com/articles/9i/HSGenericConnectivity9i.php
  http://www.DBA-Oracle.com/t_heterogeneous_database_connections_sql_server.htm

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• [Oracle] [ODBC SQL Server driver] [libssclient22] General network error

  I use the oracle gateway (11.1) to sqlserver on Linux platform with the Oracle 10 g server.
  
  I'm getting following error when I run a select query:
  
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Oracle] [ODBC SQL Server driver] [libssclient22] General network error. Check your network documentation. [Oracle] [ODBC SQL Server driver] [libssclient22] ConnectionOpen(connect()) (connect()). [Oracle] [ODBC SQL Server driver] Invalid connection string attribute
  ORA-02063: preceding 2 lines from SQLSERVER
  
  Another thing is, I've created an ODBC DSN named "sqlserver" as well. This configuration works well when the parameter "program" dg4odbc in Listener.ora. But with dg4msql, it gives an error.
  
  Here are the configuration files:
  
  -----------------
  initsqlserver.ora
  -----------------
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = database_machine:1433 / / test_master
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  
  ------------
  Listener.ora
  ------------
  
  SID_LIST_sqlserver =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = sqlserver)
  (ORACLE_HOME = u01/app/oracle/product/11.1.0.6.0/gateway)
  (PROGRAM = dg4msql)
  )
  )
  
  SqlServer =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Server_Machine)(PORT = 1522))
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  )
  )
  
  
  ------------
  tnsnames.ora
  ------------
  
  SQLSERVER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Server_Machine)(PORT = 1522))
  (CONNECT_DATA =
  (SID = sqlserver)
  )
  (HS = OK)
  )

  Hello

  The error you are getting is because your HS_FDS_CONNECT_STRING is not correct:
  Don't forget you can ping the SQL SERVER name of the Oracle server command, or use the TCP/IP address
  Check the port, it is not necessary 1433.
  You can use the name of the instance instead of the port:
  HS_FDS_CONNECT_STRING = server_ip_address/instance_name/database_name

  Be careful, in the LISTENER. ORA, you must specify the gateway machine and not the SQL SERVER machine:
  SqlServer =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Gateway_Machine)(PORT = 1522))<====you must="" specify="" oracle="" gateway="">
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  )
  )

  Ditto for TNSNAMES. ORA:
  SQLSERVER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Gateway_Machine)(PORT = 1522))
  (CONNECT_DATA =
  (SID = sqlserver)
  )
  (HS = OK)
  )

  Concerning

  Mireille

• DB Link from Oracle to SQL Server error

  Dear friends,
  
  I need met some select on tables that are in SQL Server 2005 from Oracle 10 g.
  
  I followed the steps:
  http://www.DBA-Oracle.com/t_heterogeneous_database_connections_sql_server.htm
  
  I could ping TNS who is successful, but only when I run a select I get this error.
  
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of SQLS
  
  I checked my dsn name is in small caps completely everywhere where it is used (since its proposed in many sites).
  
  Please guide me.
  
  I'm looking for really come to a solution.
  
  Kind regards
  
  Nith

  similar use to Setup ODBC and datasource
  http://www.databasejournal.com/features/Oracle/article.php/3442661/making-a-connection-from-Oracle-to-SQL-Server.htm
  and then create server link in sql server after testing WLAN with oracle

• [Oracle] [ODBC SQL Server driver] String truncation on the right {01004} data

  When importing data from SQL Server 2005 to Oracle 11 g Release2 gateway, I get following error:
  
  insert into CSDescr select * from CSDescr@sqlserver
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Oracle] [ODBC SQL Server driver] string data, right truncation + {01004} +.
  ORA-02063: preceding 2 lines from SQLSERVER
  
  Oracle database characterset is AL32UTF8
  SQLServer database characterset is SQL_Latin1_General_CP1_CI_AS
  
  Here is the configuration file for the gateway settings:
  
  HS_KEEP_REMOTE_COLUMN_SIZE = LOCAL
  HS_NLS_LENGTH_SEMANTICS = CHAR
  
  I think that the definition of the parameter HS_LANGUAGE must correct the error, but I want to know what should be the value of this setting?

  HS_LANGUAGE must be set to a character set used by the foreign database

  Try: HS_LANGUAGE = american_america. WE8MSWIN1252
  Also specify HS_NLS_NCHAR = UCS2 nvarchars of SQl Server are stored in the UCS2 character set

• Oracle 10 g 2 64 bit odbc to oracle to sql server Win 2008 EE 64 bit

  Hi, I have a problem with a creation of 64-bit 10 g oracle to sql server odbc 2, I have several instructions with no luck at all. My OS is windows 2008 EE 64 bit on the server oracle and sql server.
  
  That's what I did
  
  1. in the directory of $oracle_home/hs/admin
  inithsodbc.ora
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = hsodbc
  HS_FDS_TRACE_LEVEL = off
  
  2. in the $oracle_home/network/admin
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = hsodbc)
  (ORACLE_HOME=C:\oracle\product\10.2.0\db_1)
  (PROGRAM=C:\oracle\product\10.2.0\db_1\hs\hsodbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xx.xx.xx.xx) (PORT = 1521))
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  )
  
  And the tnsname.ora
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  PRUEBA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = xx.xx.xx.xx) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = test)
  )
  )
  
  hsodbc =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp)(HOST=xx.xx.xx.xx) (PORT = 1521))
  (CONNECT_DATA = (SID = hsodbc))
  (HS = OK)
  )
  
  I create the connection odbc test, the result is TEST PASSED
  
  4. the i create a database on my database link
  CREATE THE DATABASE LINK XYZ PUBLIC
  CONNECT to 'sysdba' IDENTIFIED BY 'masterkey '.
  Using "hsodbc."
  
  5. run a select
  SQL > select * from dual@XYZ;
  Select * from dual@XYZ
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of XYZ
  
  6. when I check the log of the listener, I get this error
  
  March 25, 2011 11:48:40 * (CONNECT_DATA = (CID = (PROGRAM =)(HOST=) (USER = Administrator)) (COMMAND = status)(ARGUMENTS=64) (SERVICE = LISTENER) (VERSION = 169870592)) * status * 0
  March 25, 2011 11:48:47 * (CONNECT_DATA = (SID = hsodbc) (CID = (PROGRAM =) (HOST =)(USER=PRO\Administrator) PRO)) * (ADDRESS = (PROTOCOL = tcp (PORT = 49329))(HOST=xx.xx.xx.xx)) * establish * hsodbc * 12518
  TNS-12518: TNS:listener could not hand off client connection
  AMT-12560: TNS:protocol adapter error
  AMT-00530: Protocol adapter error
  
  Published by: user626125 on March 26, 2011 11:39
  
  Published by: user626125 on April 12, 2011 14:49

  I guess the point of the answer above was to close and move this thread to the appropriate forum.

• Unlike char in ORACLE and SQL SERVER

  Hello gurus,
  
  I tried to querying data from Oracle to sql server through linked server, but get me an error! set length corresponds to the error! I know there are CHAR data type in sql server and thus as in oracle.
  
  But when I use the CAST FUNCTION with CHAR it works fine
  

  -- error code 
  
    select * from openquery( linkoracle11 
             select  col1, col2, col3 from test_table )
  
  
  -- say col3 char(1)   -- data type

  ---
  
  

  -- working code 
  
    select * from openquery ( linkoracle 11 
             select  col1, col2, cast (col3 as char(1)) as col_3 from test_table )

  I was wondering, what is the difference between oracle and sql server for the CHAR data type?
  
  The gurus of the idea?
  
  Thank you

  What is the error you get?

  What is the characters in database and NLS_LENGTH_SEMANTICS game on your Oracle system?

  SELECT *
    FROM v$nls_parameters
   WHERE name LIKE '%CHARACTERSET';
  
  SQL> SHOW PARAMETER nls_length_semantics;
  

  What is the character set of data in SQL Server?

  If your local database is a variable length character set (like UTF8) and NLS_LENGTH_SEMANTICS is set to (default) BYTES, a char (1) allocate 1 byte of storage which may not be sufficient for a single character. The receiving application may need to allocate a buffer with 3 times more many bytes as there are characters in order to ensure that it will be able to process the result. I don't know why add an implicit CAST that would change, but since we are several levels removed from the code to figure out how large a buffer to allocate, it is not very surprising.

  Justin

• 65 b error code trying to upgrade Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  65 b error code trying to upgrade Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Hi Auckland_White,

  ·         Did you the latest changes on the computer?

  ·         You are able to install some other updates on the computer?

  ·         You have security software installed on the computer?

  I suggest you try the steps below and check if it helps

  Method 1: If the problem persists, download and save the installation package' Microsoft SQL Server 2005 Service Pack 4 "on your desktop and try to install the same audit and clean boot.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Make sure that return you the computer to a normal startup mode once it's done.

  Microsoft SQL Server 2005 Service Pack 4: http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b953e84f-9307-405e-bceb-47bd345baece

  Method 2: I suggest that reset you the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

• Windows Update failed - error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Original title: Windows Update Failed - need help

  Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly.  I tried to restart, remove the update (even by deleting the file so it would download it again) and install again.  Nothing has worked.  Error 80070643.  Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework.  Don't know what that means.

  Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again.  Still didn't update.

  Then, I waited two days and tried again.  Even that did not help.

  I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all).  He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer.  Error: 70347 (0x112cb).

  Now I'm really confused.  On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.

  On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem.  (And why it all of a sudden would be any problem with permissions?)  This computer is not on a corporate network and has only one user account, the administrative account).  I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.

  Help!  Please...

  And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot).  Still no.  Everything I try, it is not to do nothing, pardon my language.  People smarter than me, pleasehelp!

  Hi stupID_,

  «Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »

  As the error relates to SQL, perhaps this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Links of DB Oracle to Sql server

  Hi all
  
  I intend to create DB connection from oracle to sql server 2005.
  
  Please provide the doc to create db connection from oracle to sql server 2005 and also made me know is their any freeware to do the same thing.
  
  Concerning

  It would be useful you might mention what platform works on your Oracle database and word size of the OS (32/64 bit).

  The free solution would be to use the database for ODBC (= Dg4ODBC) gateway and install it on a platform of MS Windows or Linux 64-bit with regard to these 2 platforms that Microsoft offers a free ODBC driver. On all other platforms, you can buy an ODBC drivers appropriate from a 3rd party such as DataDirect provider. I know, some people here on the Forum use FreeTDS but this driver is not a good choice when using it in production.

  Beginning with the documents where you can create a link to database free of charge:

  Please take a look at documents available on the My Oracle Support Portal:
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 64-bit Windows operating systems to connect to Oracle databases Post Install [1266572.1 ID]
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 ID]
  and
  How to set up DG4ODBC (gateway for ODBC Oracle database) on 32-bit Windows to connect to Oracle databases Post Install [466225.1 ID]

  As mentioned for other platforms, you can usually buy a 3rd party ODBC driver and according to licensing costs this 3rd ODBC driver may be more expensive the using commercial product Oracle, MS SQl Server database gateway. It is designed for MS SQl Server connections and much more powerful then DG4ODBC - for example it allows you to call SQL Server stored procedures remotely or to participate in the distributed transaction.
  Documents on the DG4MSQl are also on the support of Oracle Portal.

  -Klaus

• Data migration from Oracle to SQL Server

  Hello
  
  I have the Oracle database in one or several table, I also blob data, i.e. images are stored, now I want to move that data to the sql server database, which is the best way to do this?
  
  I would like to test for a migration of the table that contains the image data in the Oracle database and invade the SQL Server table.
  
  How to test for an Oracle table data to SQL Server migration?
  
  But the first thing I want to confirm is that if the Image from Oracle DB to SQL Server DB data are possible? is there something must be supported during the migration?
  
  Thanks in advance.
  
  Kind regards
  
  Vishal
  
  Published by: 968331 on October 31, 2012 02:31

  I think that it is supported. The equivalent data type in sql server is IMAGE/varbinary (max)

  See the bottom of the article for the mapping of data types:

  http://weblogs.sqlteam.com/jamesw/archive/2010/07/28/datatypes-translation-between-Oracle-and-SQL-Server-part-1.aspx

• Number of databases such as Oracle and SQL Server in the same application ADF

  Hello
  
  In my application, I need to use two different databases such as Oracle and SQL Server. There are screens that I need to develop in the ADF where I need to involve fields of the tables in these two different databases. I just want to know - is it possible to do so in application of the ADF?
  
  Or to create a sort of link between these databases in the backend? Then create a view object involving some distributed SQL queries. What can I do with this type of request than anything? I mean, can I use the two insert or update operation using this VO?
  
  Or y at - it another way to do this?
  
  Please help, help here would be really appreciated. I've been stuck with this problem for a while now. I did search our forums for the same problem, but was not able to find a reliable solution.
  
  Thank you
  Vijay

  It's still not clear to me if you need two db tables in a query, or a transaction.
  If this is the case, your best option (to my knowledge) is to use a db link. in this way, you only need to access (for example the oracle db) and can access the objects from the other data from the oracle database.
  I don't understand
  >
  (3) a model project with a meeting of the two datasource. I selected a data source and created OT and VO. When I have selected a different data source and select tables to create VO and EO and finished but these EO and VO is displayed in project. >

  (2) If you need to link data from these two dbs you can not use this approach (see the note at the top of the post)

  Timo

• Sort of the differences between Oracle and SQL Server

  Hi all
  
  This question is linked by both Oracle and SQL Server
  
  I have a requirement where I want to compare 2 tables line by line. A table is in Oracle and other table in SQL Server
  
  And suppose that both tables do not have a primary key. Now when I sort records by using the order by clause for a column, then-
  
  Rows with null values in that column of Oracle are placed in the background.
  When that rows with null values in the same column in SQL Server are placed right at the top.
  
  How can I make one of them to behave like any other.
  
  My only goal is to have same order of lines in Oracle and SQL Server tables so that I can compare line by line.

  YADQ: Yet another Doc Question

  Can you please avoid them?

  Take your SQL reference manual, search for the ORDER BY clause and notice that it has
  NULL FIRST or LAST values NULL values.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• corresponding data types n/b oracle and sql server

  everyone here knows that if there is a list of the data types supported by oracle and sql server (no matter releases and versions?
  
  an immediate response would be appreciated.
  
  Thank you.

  Hello

  Next post might be useful for you:

  http://msdn.Microsoft.com/en-us/library/ms151817.aspx

  If that's what you're looking for, then mark the question answered and closed.

  Kind regards
  Naveed.