Error: PRIF-12: failed to initialize cluster support services
Salvation of DBAI implement RAC with OCFS2.
Operating system - RHEL 4.0 ARE
I build FCAC at the following link.
http://www.Oracle.com/technology/pub/articles/hunter_rac10gr2.html#1
"in the link above, I wasn't in step no" 19. Install Oracle 10 g Clusterware Software.
Currently, ran the script below.
$ cd ~ oracle
$ / u01/app/oracle/orainstall/clusterware/runInstaller - ignoreSysPrereqs
When installing it asks me to run the root.sh from clusterwear script, I ran this script I got some warnings in guard and the document said to ignore.
After that that he gave the error 'The Notification of Oracle server configuration error'. I checked the script where it works and I ran the scripts manually, he received the following error message.
error
===
[oracle@aqherprac1 ~] $ /u01/RAC/app/oracle/oracle/product/10.2.0/crs/bin/racgons add_config aqherprac1:6200 aqherprac2:6200
[oracle@aqherprac1 ~] $ /u01/RAC/app/oracle/oracle/product/10.2.0/crs/bin/oifcfg setif-eth0/192.168.124.0:public global eth1/172.32.16.0:cluster_interconnect
PRIF-12: failed to initialize cluster support services
[oracle@aqherprac1 ~] $
I checked in the log "oifcfg.log".
output to log file
=============
2009-05-06 14:08:02.984: [OCRRAW] [3086845632] propriogid:1: INVALID FORMAT
2009-05-06 14:08:02.984: utread:3 [OCROSD] [3086845632]: problem reading buffer buflen 8114000 4096 retval 0 phy_offset 102400 retry 0
2009-05-06 14:08:02.984: utread:4 [OCROSD] [3086845632]: problem reading buffer errno 0 errstring success
2009-05-06 14:08:02.984: utread:3 [OCROSD] [3086845632]: problem reading buffer buflen 8114000 4096 retval 0 phy_offset 102400 retry 1
2009-05-06 14:08:02.984: utread:4 [OCROSD] [3086845632]: problem reading buffer errno 0 errstring success
2009-05-06 14:08:02.984: utread:3 [OCROSD] [3086845632]: problem reading buffer buflen 8114000 4096 retval 0 phy_offset 102400 try again 2
2009-05-06 14:08:02.984: utread:4 [OCROSD] [3086845632]: problem reading buffer errno 0 errstring success
2009-05-06 14:08:02.984: utread:3 [OCROSD] [3086845632]: problem reading buffer buflen 8114000 4096 retval 0 phy_offset 102400 try again 3
2009-05-06 14:08:02.984: utread:4 [OCROSD] [3086845632]: problem reading buffer errno 0 errstring success
2009-05-06 14:08:02.984: utread:3 [OCROSD] [3086845632]: problem reading buffer buflen 8114000 4096 retval 0 phy_offset 102400 try again 4
2009-05-06 14:08:02.984: utread:4 [OCROSD] [3086845632]: problem reading buffer errno 0 errstring success
2009-05-06 14:08:02.984: [OCRRAW] [3086845632] propriogid:1: INVALID FORMAT
2009-05-06 14:08:02.984: proprioini [OCRRAW] [3086845632]: the two disks are not formatted OCR
2009-05-06 14:08:02.984: proprinit [OCRRAW] [3086845632]: could not open device gross
14:08:02.984 2009-05-06: [default] [3086845632] a_init:7! : Backend init failed: [26]
2009-05-06 14:08:02.985: clsssinit [CSSCLNT] [3086845632]: unable to access in init OCR OCR device. PROC-26: error when accessing the physical storage
14:08:02.985 2009-05-06: [default] prifcginitclss [3086845632]: clsssinit failed. RC = 21
14:08:02.985 2009-05-06: [default] prifcgterm [3086845632]: cleanup - DONE
Please can someone help me solve the problem above.
Best regards
SG
PGO
Please see the following document.
Note: 395697.1 - 10 g RAC CRS INSTALLATION FAILS then WHAT ROOT running. SH
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=395697.1
Kind regards
Hussein
Tags: Oracle Applications
Similar Questions
-
Error starting program: failed to initialize the graphics system
I just upgraded to Windows Vista 64 bit to Windows 7 64 bit. I now have problems of execution of Roller Coaster Tycoon 2. I get an error that says: "failed to initialize graphics system '. I think the problem has something to do with the program you want to run in 256 k colors. I installed the new video drivers on the Dell Web site, but it did not help. Any ideas? Thanks in advance.
See if you can use a Compatibility Mode setting to run in 256 colors?
How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
http://support.Microsoft.com/kb/931362/en-usMake older programs in this version of Windows
http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspxWindows Vista Compatibility Center
http://www.Microsoft.com/Windows/compatibility/details.aspxWindows 7 Compatibility Center
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx -
Error scan Dell: failed to initialize the selected paper source
My Dell Scanner doesn't scan. error message: failed to initialize selected paper source. Thanks for your help with this. It's a Dell Photo 926
Hello
From my research, I want to suggest to follow the steps mentioned below:
(a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.
Windows 7 and Windows Server 2008 R2 Application Compatibility Update
http://support.Microsoft.com/default.aspx?kbid=974332
b) unplug the printer.
c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.
Reference the Dell Photo all-in-One Printer 926
(d) restart your computer.
(e) to download the compatible driver Windows 7.
Dell Photo 926 all-in-one printer
(f) install the driver when connecting the printer (power on) via a USB cable.
Hope this information helps.
-
Error: Dreams 3D failed to initialize.
Keep this error message, error of scrip, dreams 3D module failed to initialize. Tells me to contact Support @3ddreams.com, however, comes back can not deliver. This happened after I downloaded the music.
Is what type of application or the game? Are you talking about the screen saver?
What OS you are using. If you are talking about the screen saver, it seems that the app was 95 - XP, so if you use Vista or Win 7 you can try compatibility mode.
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
MCP. MCDST. LVL 80
-
How solve this error message application failed to initialize properly 0xc0000005 on start up
Hi my name corri I have a computer laptop advent. When I start my laptop it goes to the widowed loding fine screen but then when it goes beyond this point he then goes to this error message
(application failed to initialize properly 0xc0000005) then I click on ok, then it is once again, then I click ok again then it goes. then after it will theres just a blank screen without icons or nothing... I can't even open Task Manager some can help me please solve it!
Hello
You can try the steps below and check if that helps. You need the Windows XP installation CD to go forward with the steps below.
(a) use the Recovery Console, which is described in the article below.
http://support.Microsoft.com/kb/314058Note: You must make sure that your primary boot device is CD drive - go into the BIOS to ensure, if necessary,
(b) (b) demarrer start from the Windows XP installation CD-ROM, and then use the EXPAND command, like this:
Expand d:\i386\wininet.dl_ c:\windows\system32\wininet.dllNote: Where d: is the CD-ROM drive
(c) then type EXIT and when the pc reboots, you should be able to boot XP.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had to install a new hard drive after the death of my old. I use my Dell recovery/reinstallation disk. The first time I tried installing that it froze after the reboot. I then did a repair installation (twice) and each time got the following error:
PxShare.exe Application error.
The application failed to initialize properly (0xc000135). Click OK to close the application.
It appears at the end of the installation, but when my login screen is displayed, it shows only one account, administrator and request a password. I have not configured any accounts when I did the installation and you do not have a password. I tried to enter without password, using admin as password and check-in safe mode did not help - it still asked for a password.
I don't know if the two problems are related or not.
Thanks for any help!
Hi Lowery619,
(a) If you have external devices unnecessary connected to the machine, unplug them.
(b) thereafter, you can try reinstalling Windows XP.
For more information, please visit this link: install, reinstall, or uninstall Windows
Hope the helps of information.
Please post back and we do know.
-
I can't install my downoad because of this mistake install of adobe met, setup initialization failed, it be due t a fle missing. Please download adobe support Advisor to detect the problem. This program is no longer available.
Hello
Please remove Creative Cloud app and Adobe Application manager using the-
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
I get this message that displays a black screen. When I turned the computer off and then on again the same message appears. Cannot do anything else. What should I do?
Hi NuvoGrand,
Follow the instructions below to start the computer in safe mode.
1 turn on the computer or restart the computer
2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
3. ensure that the safe mode option is selected.
4. press ENTER. The computer then begins to start in safe mode.If you are able to start the computer in safe mode, you can go ahead and perform the clean boot procedure following the instructions below.
Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returns
Step 6: Resolve the problem
Step 7: Reset the computer to start as usualHow to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135After reviewing the issue, put the computer into Normal mode.
Uninstall or update the program that is causing the problem.If this does not work, let us go ahead and run the Startup Repair tool and see if the problem is resolved.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Follow the instructions in the link below to perform the Startup Repair.
Startup Repair: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questionsPlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
After reinstalling Vista and antivirus on my system, whenever my system reboot this pop in from error message "Application failed to initialize: 0x800106ba.» A problem caused this program service stop. To start the service, restart your computer or search help and Support to find out how to start a service manually"Please help
Hi Gmamjad,
Please follow the steps mentioned in the following link to resolve the ISSE: http://support.microsoft.com/kb/930522 (error message when you run a beta version of Windows Defender: "failed to initialize: 0x800106ba")
Kind regards
AM1984 -
Failed to initialize the installation program. Error 110. On Windows XP.
Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:
Failed to initialize the installation program. Error 110.
I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?
Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:
1. reboot Windows XP in Safe Mode
2. double-click on the Setup program to start the installation process
3 cancel the installation process after it starts
4. restart windows in normal modeNow, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.
-
exe application 0xc000007b application error failed to initialize properly on startup.
Original title: exe application 0xc000007b error
Hello
When I start my computer, I receive. (exe application error the application failed to initialize properly 0xc000007b)
Thank you
James
Hi James,
1 - is the complete error message you receive?
2. did you of recent changes on the system?
Check the behavior by starting the computer in a clean boot state.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
If the problem does not persist, you can continue with step 2 from the link above.
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Hope this information is useful.
-
error, failed installation initialization
It cannot install Flash Player. When I run the installation from the link on the home page, I get an error that States "failed to initialize". I tried to download and install the Installer 'offline' and it seems to work, but the program is not installed when I try to check or use the program. I also ran all the updates of windows. What should I try next?
Operating system: XP (32-bit) service pack 3
Browser: IE8 (32-bit)
Player Version: 11 (or one that will make youtube, etc working again!)
Thank you
In IE8, tools, add-ons, under show, all add-ons, you have Shockwave Flash Object listed, and it is enabled?
-
Fallout 3 PROBLEM! Error message. Could not initialize the rendering engine.
I recently bought Fallout 3 for my vista system, I haven't installed very well no problem, when I click on play in the menu, it comes up with this error message:
"Failed to initialize the rendering engine.
Hardware T & L required but not taken in charge by adapter"Does that mean I need a new graphics card or I can download an update of Dell? My office is a Dell Inspiron 350. Please help ASAP!
Lordy22
Hello Lordy22,
The fix for this problem is to install a new video card with T & L capacity.If please reply and let us know if your problem is resolved or if you need more help.
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
Failed to initialize the Application example in Hyperion Planning
Hello
I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
Error [1200497] discovered in the formula of Member for "411100" members
Error [1200497] discovered in the formula of Member for "412100" members
Error [1200497] discovered in the formula of Member for members "412200."
Error [1200497] discovered in the formula of Member for "451000" members
Error [1200497] discovered in the formula of Member to Member "501111".
Error [1200497] discovered in the formula of Member to Member "501112".
Error [1200497] discovered in the formula of Member to Member '501130.
Error [1200497] discovered in the formula of Member to Member "501240".
Error [1200497] discovered in the formula of Member to Member "501250".
Error [1200497] discovered in the formula of Member to Member '511200.
Error [1200497] discovered in the formula of Member to Member '511300.
Error [1200497] discovered in the formula of Member to Member '511400.
Error [1200497] discovered in the formula of Member to Member "511500".
Error [1200497] discovered in the formula of Member to Member "511600".
Error [1200497] discovered in the formula of Member to Member '511700.
Error [1200497] discovered in the formula of Member to Member '511800.
What should I do to get this application example upwards and running so I can see what he does?
How to initialize the sample application?
Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
-ScottHello
If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.
You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).
See you soon
John
http://John-Goodwin.blogspot.com/ -
Here's the thing.
I had just recently completely reinstall Vista on my Dell Inspiron 1521 because recently there KSoD was (BlacK S Of Death creen). I was told that I also had to reinstall my Drivers and Utilities. I had Windows running after that I reinstalled Vista (finally able to reach the screen connection.) and then tried to install The Elder Scrolls IV: Oblivion, I got some kind of error message during installation and when I clicked okay, it shut out of the whole thing. So, I took my friends advice and jumped into the CD Drivers and Utilities that came with my Dell. I extracted, unpacked and installed all the drivers available on the menu (except those who say such as Verizon, Sprint, T-Mobile on them, I don't think that those who are very important, so I only did those those.). After that I did, so I took another slap at reinstalled Oblivion. This time, he actually completed the installation. I was so excited, I clicked on the logo of oblivion on my desk, and when this menu appeared with classical music (the one that offers you the options game, Options, data files, Technical Support, etc.) I clicked Play and then the black window appears as if its going to work and then just stops and this error message is displayed: failed to initialize renderer. NiXAdapaterDesc::GetDeviceCaps() failed. Then everything closes, I tried several times and got the same results each time.
The main reason I'm being so complete in this regard is to let you know EXACTLY what I could probably help find the problem. Another thing... I'm absolutely stupid with computers, I tried Googling the error message and I found sites where people have had the same problem but they have started talking about all this driver stuff I didn't understand even remotely. I have NO Internet on my computer, unless there is a way to disconnect a cable from my PC at home and connect it to my laptop so it won't be (could this work? If so which cable I have unplug my pc at home and my laptop? Never tried it before.). So I ask, if anyone out there who is willing to help has the answer to my problem, could you tell me how to solve this problem, as if you were talking to a 6 year old? That or just make so that even the dumbest, most computer-illiteriate person could understand. I know almost nothing about all this stuff of pilot. When I reinstalled the drivers on my pc I just follow the instructions step by step that my friend gave me, but had next to no knowledge of what exactly I was doing.
EDIT: I played oblivion on my PC countless times before KSoD would have on me without any problems at all except that it could be a bit of lag... That's all. It has completely worked until I got the black screen of death on my Dell Inspiron 1521 and had to reinstall vista and all the drivers.
Hello DJS4400,
Thank you for using the Microsoft Windows Vista Forums.
GetDeviceCaps() is a DirectX routine call made by the game engine for you check the details of the video card, what it is capable of supporting, and after that the game engine make certain decisions about what all the things to initialize for her. If that is a failure, it means that the game engine is not able to read your video card correctly.
Most likely, this would be a problem with the drivers and of course, could be a problem with the card itself.Try running another game and see if it works. If it isn't, definity your drivers need a second look. If it does, this means, oblivion has a problem with the drivers you are using, or else they have not been installed correctly.
I would first try:
Click Start-> then type ' Device Manager "in the field of research-> game controller, select device-> next Manager, select sound and video-> This will drop your card-> with the right button on the map and you should have an option to update the drivers." Once you repeat this test.
If still no luck, right click again on the map and select Uninstall (you may have to restart after that) and then return to the driver and reinstall. In most cases if you need to reboot, when your computer starts it will try updating the driver automatically from the site.
Please let us know status. Thank you!
Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Satellite L550 some letter/numbers/symbols do not appear as the key typed
Most painful of those:@ should be by ALT GR e, it is rather to ALT GRline of underscore should be SHIFT-, I couldn't figure out how do it again I tried the config EN or FR (USA), it does not help Do anyone has the solution.
-
I'm considering the purchase of a XYboard only a Wi - Fi connection. Can either be loaded on the same charger as my RAZR with my RAZR?
-
Acer Liquid Z630S MHL is consistent?
I bought a Z630S liquid Acer recently. Is this compatible MHL?
-
Windows 7 does not support fdisk more is what im saying. y at - it another program which marks bad sectors on the hard drive, so I can continue to use my hard drive? OT: Fdisk
-
Sending pictures to email - not set in order - and reverse before getting them
I selected a series of photos in a folder in the picture library - 1st pic-clicked and clicked on the last offset. Photos were numbered from SAM_005 to SAM_016 and when sent to the Email SAM_016 has been attached 1 SAM_005, 006, etc - so out of seque