ERROR PROVISIONING SNAPSHOT

Similar Questions

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• Windows backup error: a snapshot could not be created. Error code: 0 x 81000019.

  Original title: Windows - no system reserved partition backup error

  Whenever I try to back up files by using the backup utility Windows 7, I get the following error message:

  "A snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information.
  "Details: the specified object could not be found" error code: 0 x 81000019

  The backup utility starts and says is 'create shadow' fails.

  In the research forums, I find a common solution to the increase in the size / cleaning of the system reserved partition.  My problem is that the system reserved partition does not exist on the computer.  The computer originally had Windows Vista and upgraded to Windows 7 x 86 Ultimate SP1.

  Is it possible to get Windows 7 backup to work without a system reserved partition?  If not, is anyway to create a system partition reserved without wiping the hard drive and reinstalling everything?

  Hello

  Thanks for the update.

  I ask you to answer these questions:

  1. the computer is connected to a domain or a group of House?

  2 NAS hard drive is located on a different computer?

  If the computer is connected to a domain, then I ask that you post this question on the forum of TechNet at following link:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  Please get back to us with answers.

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• ERROR: New-Snapshot (the operation is not valid due to the current state of the object)

  Hello guys!

  I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)

  I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have

  1. Add snap-ins powercli and connect to virtualcenter servers
  2. ask the VC servers to virtual machines in a perticular folder
  3. Loop foreach on these servers to create a snapshot with the name $snapshotname

  Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:

  • Testmagne1 - normal operation
  • Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
  • testmagne3 - normal operation

  Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.

  The strange thing is:

  The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)

  In virtualcenter, the output is as follows

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot is created successfully - as expected

  However, the exit in powercli is slightly different:

  • Testmagne1 - snapshot is created successfully - as expected
  • Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
  • Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?

  
  

  Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"

  
  

  I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere

  
  

  Here is some additional information:

  1. the Script (abridged version of it. It generates the same error):

  -STARTUP SCRIPT-

  $ErrorActionPreference = "stop".

  Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null

  SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names

  $servers = get-VM-location 'testfolder '.

  $snapshotname = 'Testsnapshot '.

  $verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.

  If ($verifycreatesnapshot - eq 'y') {}

  Write-Host "snapshots of creation...". »

  {ForEach ($i in $servers)

  Write-Host "instant Creation for $i."

  Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}

  Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}

  }

  Write-Host "command finished.

  }

  else {Write-Host "Operation canceled by user"}

  Read-Host "end of the script. Press ENTER to close. "

  ------------------ END SCRIPT -------------------

  2. the PowerCli error messages:

  Error for Testmagne 2 (as expected):

  File: [DATASTORE114] testmagne2/testmagne2.vmx

  DynamicType:

  DynamicPropertyInternal:

  FaultCause:

  FaultMessage:

  ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O

  perationFailed

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction:

  SessionId:

  ConnectionId: /VIServer = SENSORED: 443 /

  Severity: error

  Message: 31/10/2013-10:52:16 New-Snapshot the operat

  ion for the entity 'testmagne2' failed with the follo

  the wing's message: "file [DATASTORE114] testmagne2/testmagn".

  E2.vmx was not found.

  Data: {ParameterValues}

  InnerException: VMware.Vim.VimException: exploitation of the entity

  'testmagne2' failed with the following message: 'thread '.

  testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy

  ND ".

  TargetSite:

  StackTrace:

  HelpLink:

  Source:

  Failed to create the snapshot for testmagne2

  Error for testmagne3:

  Creation of snapshot for testmagne3

  ErrorId: Core_BaseCmdlet_UnknownError

  ErrorCategory: NotSpecified

  TargetObject:

  RecommendedAction: An error occurred when executing command: new-Snapshot. I have check

  f exception for more details.

  SessionId:

  Login ID:

  Severity: error

  Message: 31/10/2013-10:52:17 instant New-capture operation is not

  valid due to the current state of the object.

  Data: {ParameterValues}

  InnerException : System.InvalidOperationException: operation is not valid from

  e to the current state of the object.

  at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo

  reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi

  St)

  at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService

  Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p

  rogressCallback)

  at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl

  and. EndProcessingErrorHandled()

  at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC

  mdlet. EndProcessingErrorHandled()

  TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err

  orRecord)

  StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT

  erminatingError (ErrorRecord errorRecord)

  HelpLink:

  Source: System.Management.Automation

  Failed to create the snapshot for testmagne3

  3 PowerCLI version

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.5 Release 1 build 1295336

  ---------------

  Versions of the snap

  ---------------

  VMWare AutoDeploy PowerCLI component 5.5 build 1262826

  VMWare ImageBuilder PowerCLI component 5.5 build 1262826

  License of VMware PowerCLI component 5.5 build 1265954

  VDS's VMware PowerCLI component 5.5 build 1295334

  VMware vSphere PowerCLI component 5.5 build 1295334

  
  

  4 VirtualCenter version

  VMware vCenter Server Version 5.0.0 Build 913577

  vSphere Client Version 5.0.0 Build 913577

  Hosts: VMware ESXi 5.0.0 Build 914586

  If you need additional information, let me know

  Any help is greatly appreciated

  Thank you!

  -Loincloth

  
  

  
  

  Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.

• Error creating snapshot of power-CLI

  I want to create a snapshot to the virtual machine using the cli power, when I'm trying but get the following error

  

  This should be this link:

  New-Snapshot -VM  -Name 
  

  get-help new-snapshot - full (will give you more details about this command)

• Error restoring snapshot

  On two occasions since the upgrade of VMware Workstation 8 Ive met the following error when you try to go back to a snapshot:

  Instant restore error: couldn't remove change tracking file.

  Surprisingly, a search on this error both here in on google pulled the high zero results.

  Has anyone meet this issue before? Is it possible that I can get back to my shot, or am I out of luck?

  Thank you.

  CBT (changed block Tracking) is a feature of ESXi. I suggest that you remove the following two lines to the file the.vmx

  scsi0:0.ctkEnabled = 'true '.
  ctkEnabled = 'true '.

  as well as the time of "v10-Master_DemoServer-000002 - ctk.vmdk", the virtual machine is turned off.

  André

• Unspecified error on snapshot (data store)

  Hello

  I have a virtual machine, there are two partitions, one is 250 GB and another is 256GB.

  I tried to make the clone but it gives error operation failed too, I tried to take sanpshot then it gives below error.

  "< File_name ed specifi c > file is larger than the maximum size supported by the data store ' < datastore specifi ed >.

  After I tried to reduce the size of the second disc hard 250 GB, but when I went on the virtual machine, it still showing 256Go and unable to take pictures with the same error.

  The second drive is drive D there is nothing but I'm afraid to remove what could be the effect on the operating system or the application since it is Exchange Server.

  Kindly guide me what I have to do so safely.

  NOTE: There is no everything raw disk attached.

  Kind regards

  Badr.

  
  

  Check the block size of your VMFS datastore. A block of 1 MB limit you to 256 GB or smaller files.

  Here are a few KBs for more details.

  Block size of a VMFS data store limitations

  http://KB.VMware.com/kb/1003565

  Creating a snapshot for a virtual machine fails with the error: file is larger than the maximum file size supported

  http://KB.VMware.com/kb/1012384

• Error returning snapshot

  Hello!

  We had a VC 2.5 with the hosts of the esx3.5u4 and the Lab Manager 3, which uses one of the hosts.

  We have improved the VC and ESX for the worm. 4 and Lab Manager to worm. 4

  The host used by the Director of the laboratory is not part of the DRS cluster and has a local data store.

  Now, using Lab Manager we are trying to get back to a snapshot for one of the virtual machines and get the following error:

  Can't go back 'vm-name '. The host on which the virtual machine is deployed has a processor type that is incompatible with the item back.

  Before returning upgrade went very well and without errors.

  And the material have not changed a bit.

  Can anyone help?

  It's nasty bug that I am surprised Vmware still remains to be resolved.

  This is the basically what you can do to fix it - although VMware has yet to find a solution more permanent.

  In the fsdir table of database on your server Lab Manager - there is a field of type of processor - find this number is. This will be a number like, 10, 15, 13, 17 or something like that...  Want to watch the ID # for the VM instance broken Setup that won't come back.

  About to return--(rétablir configuration id #/ annuaire qui vous voyez aussi sur cette fsdir) - find this number is.  And look in the same table...

  They do not match... match - I'd set to Null if you use CVS.

  This problem does not disappear, btw...  It will only solve it to this point in time.

• Error removing snapshot using vmware-cmd on ESX 3.5

  Hello VMware specialists,.

  whenever I try to delete a snapshot using vmware-cmd ("" / usr/bin/vmware-vim-cmd vmsvc/snapshot.remove vmid ' ") I get the following error:

  {(vmodl.fault.InvalidArgument)

  dynamicType = & lt; unset & gt;

  invalidProperty = & lt; unset & gt;

  MSG = "a specified parameter was not correct.

  "

  }

  What is the problem?

  Can someone help me?

  thx a lot

  Rilli

  You have more than one snapshot? in this case, you will need to provide arguments to inform additional cli command which instant you want missing. If you want that all went snapshots just use

  VMware-vim-cmd vmsvc/snapshot.removeall vmid

  Use the following command to get more information on the State of snapshot for VM

  VMware-vim-cmd vmsvc/get.snapshotinfo vmid

• Cannot create a backup, error: "a snapshot could not be created."

  Original title: computer backup

  When you try to back up my computer, I get a message that says "a snapshot could not be created. Storage insufficient to create the shadow copy storage file. My D drive shows that it is full. Can I format drive D I can backup?

  Hello

  The D: partition is normally your recovery partition that you do not touch with the exception of the enumerated grounds.

  You don't tell us the size of your D: partition.

  There are between 5-15GBs, is the recovery partition and read more:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  How to save properly:

  If you want to do a complete PC Backup or only a backup of files, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  http://www.home-PC-help.com/windowsvistabackup.html

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon

• Wrong error message for snapshots

  Hello. We have a PS6210xs and 6000 bundled together running FW 7.1.9. This morning, I got the message "than snapshots" for 7 volumes, but all have the right number of snapshots. All volumes are connected to Windows server VM iscsi data volumes.

  6 volumes are hosted by the same Windows VM, and the snapshot for each error said that there are 0 available snapshots (and again, snapshots are actually there). Seems like a pretty big coincidence, but complicate the model, which hosts VM even several other volumes that had no error for snapshots.

  I have about 100 volumes which becomes instant at the same time. Maybe SAN HQ has just for a few microseconds, as he ran through the instant check? Should I shift instantaneous time of some?

  Thank you.

  Hello

  By any chance, is this part of a collection?  with collections, the timing is very sensitive, since the idea is that the volumes of the collection are linked.  The volumes in the collection more, more the calendar becomes.  As everything must be appeased at the same time.

  If the volumes are not related.  I.e. Data/Exchange log files, then I would not use the collections, or only use collections for some volumes and shift some departure times.   Even 5 minutes is fine.

  Kind regards

  Don

• vCenter esx 5.5 - consolidate the snapshot fails with an error occurred by consolidating the discs: msg.snapshot.error - NOTFOUND?

  I don't know why is this error?

  I got an error that the virtual disk space was low tool and my vm has been automatically turned off.  I scoured the data store and I saw old clichés that were very important which could be removed.

  I went into the Snapshot Manager and has tried deleting them and started getting the error msg.snapshot.error - NOTFOUND.

  The clichés that I deleted since the Snapshot Manager always appear when I browse the data store, but are locked.

  I really need to be able to consolidate these pictures in the parent company.  100 GB free on the store of data right now.

  If I try to take a new snapshot it fails and says: an error has occurred when taking a snapshot: msg.disklib.OPENPARENT.

  I also noticed after the fact that my hard drive is pointing to the most recent snapshot rather than to the parent.

  I think if I edit the .vmx file and change it so that it points to the parent would be the load, but then I will not lose the clichés?

  I like to keep at least the most recent roll in parent company snapshot.

  Any ideas?

  Thank you!

  Erin

  Hello!

  Thanks for the reply.  Unfortunately, a part of the problem is that the data store was running out of space.  If I didn't have space or time to try a clone.

  I did a reboot and after that has been able to update the CID to get the right string after I changed the hard drive to point to the base file, power, created a snapshot, turned off and pointed to the hard drive in the last snapshot.

  But there was a corrupt, one in the list since my VM corrupted after all the snapshots consolidated (+ 6 hours later).

  I didn't have a lot of time to continue to troubleshoot or try a clone on another virtual server, we have little space so I started from scratch.

  Fortunately, I discovered that my backups of the data have been very well, I so reinstalled Windows and started from scratch.

  Thanks for the suggestion though!

  Hope this helps someone else because I just watched as he went to work, and I don't know if a clone would have gotten it going or not.

  Erin

• No Netflix - Provisioning Server connection failed

  Tonight, I'm suddenly unable to connect to any of the streaming services (Netflix, Amazon, etc.) through my Player DVD BDP-S590/BX59. When I checked the status of the network, everything was fine except for the following error: "Provisioning Server Connection Status: failed.

  I made no changes to this player. When I check the status, the software is updated. My home network works fine. Can I use the DVD player for a wireless connection to my computer via a Serviio server to play music and video. I can also use the web browser of the DVD player to connect to websites such as the New York Times. The only mistake I can identify is the "Provisioning Server Connection Status: failed.

  I contacted Sony support via their online chat and was quickly degenerated to a high-level technician. He doesn't seem to know the status of their provisioning servers; However, he recommended that I completely reset my DVD player.

  Is anyone else having these problems tonight? In the past, it seems that the Provisioning Server outages have affected a large number of people.

  
  

• Error related to linear the predictive coding (LPC) for speech recognization in Labview

  Hello

  I m doing a program in labview for speech recognization in labview.   I'm doing a file .wav 'before' word and convert it to data waveform and use linear predictive coding (LPC) Subvi which available in the site OR the voiceanalysis program to generate graphic formants. I get two error but I m get not the average of this error... If anyone can tell me how to solve this error and what the error means. ?

  Please someone help me... I m all confused.

  I am attaching two file related to the error...

  We would need to see the code for help, these error message snapshots are not particularly useful - they seem to indicate that your waveform is empty?