graphic problem with computer laptop dv6-3123tx

I have hp dv6 with ati radeon graphics card 3123tx round 5650. I've recently upgraded to win 8 and now I cudn switch on the ati graphics driver, I tried the Device Manager screen becomes black. Can someone help out me.

PS: I did a full install of windows 8 (I did not go to win7) so all of my software hp disappeared. I have not "graphics switching option" as well

At this time, HP will have to create an official switchable graphics for switchable graphics to work properly. This is because Windows 8 use a different display driver architecture.

I can't guarantee this works, but you can try the steps listed in this post.
NOTE: The steps listed in this post are not official measures of HP. HP assumes no responsibility for the result of these steps, because this is a user to user community.

Tags: Notebooks

Similar Questions

  • Intermittent problems with the laptop DV6 wireless

    I bought a HP DV6-6145TX about 2 weeks ago and in recent days the wireless connection no longer works.

    That is to say that even though I can ping it does connect to Web sites.  If I continue to clicking Refresh then it will load and then work ok for a few minutes, and then the same problem, website does not again for a minute or two.

    Is this a hardware problem? (I already loaded to the top of the latest Intel drivers wireless off the HP website and tried to disable the bluetooth module).

    Operating system: Windows 7 Home Premium 64-bit

    Hi Paul,.

    Thanks for the tips.

    It did not work.

    However, I found a tip on the web that makes. Essentially had to reset the network with the following settings:

    netsh winsock reset catalog

    netsh int ip reset reset.log

    Hopefully someone else gets help out of this because it has been massively annoying.

    See you soon,.

    Jason.

  • Graphics problems with Latitude E550

    Hello

    I have a problem with a laptop computer latitude and native resolutions.

    I currently have 2 Latitude E5550.

    It has a native resolution of 1920 x 1080 (read in the bios) and the other has a native resolution of 1366 x 768.

    The same drivers (Intel HD graphics 5000 I believe. Video bios 1032v17). Same bios versions. As well on Windows 7 SP1 64 bit.

    My first idea as to why this is because I changed the hard drive in the laptop 2 (1366 x 768 a). It was a drive of 500 GB hard disc, but I replaced with an SSD and installed windows 7 cost. Not sure why this would cause the resolution to be less well?

    Any other information needed let me know.

    Thank you.

    One was ordered with the standard display panel (1366 X 768) and the other has been ordered with an upgrade screen FHD - in other words, the material is different.  This has nothing to do with the drivers, WIndows, etc - a system simply has a screen resolution higher than the other.

  • (Redirected) Serious problems with computer Inspiron 15, 7000 series

    I bought an Inspiron 15, 7548 end of may 2015. I bought to use for work and college classes and bought Adobe PhotoShop Elements and CorelDraw x 7 software (after PhotoShop has not worked) for photo editing. The screen resolution is so high that I see even the buttons program, Windows Picture Viewer and many other programs. They appear in and 1 "x 2" square in the center of the screen). Can I decrease the resolution of the screen with less desirable results. The laptop also freezes at random and must be delivered to work again. There is also a major shift by typing in Word 2013, Facebook, Tumblr & Pinterest. I spent 8 hours trying to get some sort of resolution with all the problems only to be told by Dell support that he's spent 30 days return period and there is nothing they can do to help me. I'm just trying to get this fixed, replaced or repaired (at this point, I would like my money). I can't talk with anyone in the United States (not Dell policy) and do not know where to turn. I started to document (images and videos) many questions that keep appearing daily. Technical support tells me the question with the hi res screen is a known issue and they are sorry but there are no miracle or patches. I even took off from work and led to their location in Plano, TX to try to get ANY kind of help. No luck there. I work inside and many of our technicians look at there, both say there are problems with the laptop.

    Anyone know who I can talk to (a person in the United States would be although I was very missed by India support person I spoke with last) or where I can take the laptop to someone with Dell show what is happening with it? I am at a loss here. I am a mother single life work paycheck to paycheck and spent over $ 1500 on this laptop and the software I can't use. I own a very expensive paper weight now. Any help would be greatly appreciated.

    Hi jbills8778,

    Please repost this in the laptop computer forum to help with your problems. We have great people who can help you.

    http://en.community.Dell.com/support-forums/laptop/f/3518

  • Microsoft sounds tell you that you have a problem with your laptop

    I get phone calls from microsoft telling me that I have problems with my laptop,

    fact microsoft rinng you.

    No, they do not, ever.  It is a long-running scam and you shouldn't believe anything, they'll tell you or let them access your computer in any mode.  Simply hang up.

  • problem with my laptop asking for the administrator password or power on password

    I have the same problem with my laptop asking for the administrator password or power on password. It is a compaq presario cq61. It happened when my hard drive failed and was not used for a long time. With the password, any help would be much appreciated. It says system turn off after a few trials with the key: 55427586

    Hello

    Try to enter: 40585508

    Kind regards

    DP - K

  • M30 - graphics - problem with 3D - games

    Hi guys.

    Since last week I hava problem with my laptop. Whenever I want to play a game, which is based on the 3D screen false and I have to reset my laptop. The problem is that this only happens to 3D - games. The latest driver is installed. So I have no idea what is really bad. A friend told me that the 3D chip could be default.
    Any suggestions what I can do?

    Hello

    Try to start DirectX and check all of the tests under the view tab.

  • call of hoax? -A received a call from Microsoft who said I had a serious internal problem with my laptop

    I got a phone call from someone who said yesterday that they were from Microsoft and I had a serious internal problem with my laptop. Would Microsoft ring blue like that or is this a scam call? Thank you

    Microsoft do never not solicited for calls.

    It is a common scam. Do not give them information, do not give them access to your PC and do not go to all the websites that they suggest. One moment. See:

    http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  • I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

    I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

    original title: Internet connectivity problem

    Hello

    Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

    Support link: http://www.pandasecurity.com/homeusers/support/

  • APEX 5 - problem with computations in applications.

    Hi experts,

    I am facing some problems with calculations and expressions too.

    I have two EPS. Dev and Prod (4.2). I upgraded to 5.0 apex in the dev environment.

    After a few don't test with applications no DEV I have problem with computation - nothing is changed in both of the approx.

    For example: I use point computation to only display the sysdate value - 10 after a label. (some info default filtering).

    On prod ENV everything works OK - value appears when I reference by + ITEM.

    This same article on DEV invariably shows nothing. There is no error in the LOG.

    PROD:

    2015-05-26_131505.png

    2015-05-26_131613.png

    TEST

    2015-05-26_131541.png

    2015-05-26_131632.png

    Is there a difference any to save the session state for items? Before that the regions are displayed?

    I have same problem when I want to use certain conditions to show some ITEMS/REGIONS/DA... where some ITEM_VALUE is used.

    I tried the same thing on apex.oracle.com.

    For EXAMPLE:

    Some button should only appear if a page element value is not zero (: P_ITEM is not null). (I tried DA or simple condition - screenshot below)

    He worked in APEX 4.2 but not in 5.0 for me.

    If I use PL/SQL Expression and type "1 = 1", everything works. But I need the old feature where I can use the comparison of point values page.

    This does not work for me in the Page load DA. It has never triggered.

    2015-05-26_132610.png

    I work with APEX about 6 years, but I have never seen this.

    Concerning

    J

    Hello

    I don't know if I understand your DA it checks the P1_TEST "is not zero", but this element of the page is set anywhere on your page, then this condition DA won't be ever true. For your calculation, the calculated value is correctly displayed next to your agenda of the P1_DATE_FROM page. I'll have a look at what is happening with 'SQL Expression. But please be aware that this is just a warning in the Page Designer, you will still be able to use "SQL Expression".

    Concerning

    Patrick

  • HP ENVy 4 1102tx: big problem with computer graphic card hp laptop

    MY computer laptop hp envy 1102tx running 64-bit win 8

    When I bought my laptop there were some problems with the display, she would get destorted occasionally. But over time, this problem became worse as

    1. display and sometimes audio would get very disttorted that seems to be the screen flashes, but if I run a game or high demanding software chart everything is normal.

    2. sometimes touchpad and some keyboard keys stop working

    I tried

    1 system restore using the recovery partition

    2 update screen adopting several times

    3. when I got my laptop the customer, what they came up with a temporary solution to a deactivation of the adopter display amd

    but adoptive parents to display like this switching is so boredom

    Is there a permanent thanks to this problem?

    When some people are updated there victory hp 8 machines 8.1 that they also get the screen black on startup, why is this? is this an inherent problem with the time between two different graphics cards?

    Hi @lima619

    Welcome to the HP support community! I see that you have some problems with your desire to 4. Try to install your driver high definition Audio Intelas it should be the graphics card that manages the basic functions. I'd also sure that your Catalyst Control Center is only the Setup for your high performance games and programs. This HP document will show you how do it.

    By system restore you did take back you to factory defects as in a collection or just go to a previous restore point? If you have a full recovery to factory settings then it seems like it might be a hardware problem with the keys / TouchPad if they start working again.

  • sudden problem with HP Pavilion dv6-2157wm laptop

    Hello.  About 2 weeks ago, my laptop (a HP Pavilion dv6 model) worked very well.  It has been plugged in the power cord and adapter at the time.  One day, I went to check my emails and the laptop suddenly acted like it has been restarted, then it turns off completely.

    I waited a few minutes for re - turn on the laptop, but it does at all.  I unplugged the power cord and plugged in the power cord into the computer slot, but the led next to the power cord housing doesn't appear as it normally does when it is plugged.

    Also, when I pressed the power button to turn my phone back on, it lights.  Instead of this, a light in the front of the laptop (under the symbol of lightning bolt) flashes 3 times and then stopped flashing.  I took the battery and put it again after a few seconds, but it won't always turn.

    I noticed that the cord of the power box was nice and warm when the laptop shut down suddenly, as it was the laptop (despite the use of a laptop to refresh at the bottom of the laptop fan). The model number of the cord is WASGV0CL9YIVCU.

    What is happening with my laptop?  I use this unit to my secular Ministry work and need to work as soon as POSSIBLE!  I don't know if it's the power cord which broke or the battery needs to be replaced.  I bought the laptop in early 2010 and kept in good condition since then.  Help, please!

    Jessie

    Hey @prettykittyabc ,

    Welcome to the HP Forums!

    I understand you're Pavilion dv6 laptop does not light.

    The symptoms you have described would indicate the AC adapter or power cord no longer works. The laptop flashing lightning bolt symbol is the BIOS say you there is not enough power to turn on the laptop. If the adapter is connected, then it would be safe to say that the adapter is not power to the laptop, which would mean that the battery cannot be recharged.

    You can order online a replacement adapter, but I would say to contact the HP support by phone to order a replacement card for your laptop by phone in order to ensure the right adapter is purchased. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

    Thank you!

  • Windows 7-problems with the laptop computer's System32 folder

    I bought this brand new Acer Aspire 5251-1005 computer laptop a week ago from Best Buy and it comes pre-installed with Windows 7. Everything went beautifully except for an unknown problem. A guy organized, I have some of my important programs pinned on my taskbar (for example, MSN, office, Skype etc.). However, when I right click in a program (ie. MSN) and click on a task (IE. Mail box), this task is not activate Instead, my System32 folder opens... Very weird.

    I searched on several forums. I tried to do a system restore (quite a pain to reinstall everything) and did not work. Tried to activate my guest account to check if my account is corrupted. This was not the case.

    If anyone has a solution (hopefully one that doesn't require too many steps) Please help me!

    I had the same problem with ACER 5251-1513, and it turns out to be a third trial that Shredder calledEgis Tec included with MyWinlocker suite program.

    After you have uninstalled Egis Tec Shredder, the system is returned to normal.

  • I have a computer laptop dv6-6167tx and I just wanted to ask if I could update its graphics.

    Product: Hp pavilion dv6-6167tx

    OS: Windows 7 64-bit

    Memory: 4 GB

    GPU: Radeon HD 6490M

    Hello

    Unlike desktop computers, graphics upgradding on the laptop is not easy as walking in a park, difficult, expensive, or even impossible depending on how we look at it:

    (a) for the graphics card (including integrated card) which is welded to the montherboard/system board, we can just say: buy a new machine.

    (b) for the graphics card dedicated: basically we can but find map MXM is one thing, the upgrade of cooling system is another thing, and this may required more power to the power supply... Total cost could be equal to buy a new machine.

    Hope it makes sense.

  • Windows 8 games graphics problems with Ideapad Z575. Do not play games. :'(

    After you have installed Windows 8 and install all the drivers that I got from the site Web: Lenovo's laptop can no longer play any games. I have more option open of AMD Vision options or options "Switchable Graphics" as they do not appear in the menu when I right click on the desktop. I've updated the driver graphic via Lenovo website, but still cannot access any game. When I try to start a game, the game will display a white color screen with slight graphical artifacts. When I tried to start one of my games, "Killing Floor" it actually caused my cell phone restart.

    Anyone have similar problems with their Windows 8 pc or have a solution?

    Well, I finally found the problem. I discovered that the graphics driver that I had on the Lenovo site have actually NOT installed us. When I ran the Catalyst Install Manager, the Manager showed global progress bar, but it did not install anything. That was pretty weird.

    When I ran the driver Catalyst install listed in the Chinese link that was given to me in this thread.

    http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/is-it-safe-to-download-and-install-AMD-DRIV...

    It actually installed and now everything seems to work. I asked of Vision engine again, I can use switchable graphics and I just tested with Dark Souls prepare to Die Edition without any problem. The game is actually more smooth.

    Thanks again for the help.

Maybe you are looking for