Error reading device - IDT HD Audio codec driver

Similar Questions

• No sound from computer troubleshooting returns the message: "device driver IDT high definition audio CODEC driver problem.

  I can't get any sound from the computer.  Worked, but quit when I tried to watch a UTube video several hours
  After leaving the computer.  While troubleshooting, AutoCorrect could not solve the problem of the message
  has received "device driver IDT high definition audio CODEC driver problem.   I have the Windows 7 operating system.

  Hello Sharon,

  When you say "AutoCorrect" do you mean this:

  http://windows.microsoft.com/en-IN/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 ?

  If not, or you are looking for a driver try, here's one from Sony. Note that you may need to run in compatibility mode (with the right button on the file (or its icon on the desktop), select Properties, select the compatibility of the top row): http://download.cnet.com/AR5-Drivers-zip/3000-2108_4-180025.html .

  Let me know if one of them fixes the problem for you.

  Kind regards

  BearPup

• IDT High-Definition Audio CODEC Driver.

  Please computer its IDT High-Definition Audio CODEC Driver for windows xp driver laptop compaq presario cq61 115ee

  Use your C:\swsetup\driver\Audio Vista driver

• I get an error code 10. DT High Definition Audio CODEC driver problem. Have uninstalled and re installed, still no progress. Any advice? I have

  I bought a new laptop, Dell Vostro 3550 and found pirated software. I installed Windows 7 Pro (64 bit).

  There is no sound at all. Get a code 10 message, IDT High Definition Audio CODEC has a driver problem. I uninstalled and re installed the driver without result.
  If anyone can help?

  Hello Eugene,

  When you installed Windows 7 Pro, did you do a reformat and clean install, or have you just loaded Win 7? Part of the problem may be a residual of pirated software. I recommend a reformat and clean install if you can do it now.

  In the contrary case, the thing to look at is if there is a driver conflict between what driver is there now compared to what was there. Go to control panel | Device Manager and watch the video, sound, and game controllers section. What drivers are here for audio? And which audio driver your speakers are pointed to? The active audio driver suitable for your speakers.

  If you could answer my questions, I might be able to help you further.

  Kind regards

  BearPup

• HP Pavilion 2320tx g6: IDT HD Audio CODEC for HP Pavilion 2320tx g6

  Hello! I used the IDT Audio CODEC for Windows 7/8 for a while, but a few days ago I accidentally uninstalled the Audio driver. I searched the internet for the suitable driver for my laptop, but the audio driver listed here package seems to be broken. After downloading the package and extraction, she seems to contain the Realtek Ethernet Controller Driver (must be contained in a sp61713) instead of the Driver Audio IDT. I can't find the original content of sp61716and so impossible to install the correct driver IDT. Anyway, the size of the file of the current binary file listed is 5.77 MB, too small for the IDT audio driver in my opinion.

  I looked almost everywhere and downloaded dozens of pilots under 'IDT HD Audio 6.10.6417.0 A', but none of the .exe, I tried it, works.

  I'll be happy if someone can link me the content of sp61716 (no, the ftp://15.193.112.22/ftp1/pub/softpaq/sp61501-62000/sp61716.exe package contains the Realtek Ethernet Controller Driver after extraction), or correct the original in the Support page link, so I can return my headphones to life.

  Thanks in advance.

  EDIT: I tried system restore already, but it did not work. He showed that the restore was successful, but the pilot has the same default Microsoft, which does not help my helmet. At this point, I guess reinstall the appropriate driver is the only option I can think.

  EDIT2: It is certainly not the problem of my helmet; they work very well on other devices. In addition, previously I had downloaded and installed the driver from the HP itself support page, and the old version of sp61716 was indeed the (good) driver to work.

  Hi there @Potla
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I appreciate that you try to reinstall the audio drivers. I'm happy to help you.

  A method, you can try is to recover the pilot of the original image. See the following for how to do this:

  Computers HP - using Recovery Manager to restore the software and drivers (Windows 7)

  Let me know if it works for you.

• not his vostro1720, xp pro, IDT HD audio codec, device cannot start code 10

  update of XP pro and now no sound.

  device cannot start code 10

  any suggestions?

  Hello. You can try to cancel the changes with the Windows system restore, but generally if it was a Windows Update then it cannot Ωtre annulΘe. Go to start > all programs > Accessories > system tools > system restore
  and check the box "restore my computer to an earlier time."  Choose a date before the update.

  If it does not then try to install the IDT audio driver for Vostro 1720.

• No sound, I use IDT HD Audio Codec, I get an error code (10) do not start

  I had to reboot my computer from scratch. everything seems to work except Audio Codex. I have the software uninstalled and reinstalled several times. But I always get an error code 10. What does an error code, thanks

  Hello

  1. What is the brand and model of your computer?
  2. Have you tried updating the sound card drivers?

  You can follow this link & check if the problem occurs:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Reference: no sound in Windows

  Hope the helps of information.

• No sound from speakers. Driver IDT HD Audio CODEC link posible changed with the Norton driver manager.

  I read the other posts in this forum and took no measures not already as I could. Roll back the driver caused the blue screen of death. the pilot in the rear seat was placed on the blue screen. I lost the paper while trying to save my computer. Entertainment dv6-6140 of HP Pavilion PC. Remove the Chuck restores sound temporarily. Windows was created to replace a missing driver automatically causing the accident. It is set to manual now. Beats audio control says its startup file is missing and that it was the first symptom, followed by the loss of his. I have no silent films and would appreciate any help, as I am new to laptops and windows 7; Thank you.

  Dave67

  the Driver Manager installs a driver automatically but ill keep trying thanks a lot
  Dave

• IDT HD Audio Codec and the stereo mix Option.

  Okay, so, I have this thing, but don't see Stereo Mix. I need to activate this option to record the sound from a video recording program. I tried to download the drivers, but they are not compatible. How this pop up option? I have an Inspiron 1545, by the by.

  If you are using Vista, make sure that when you are in the 'Recording' tab, you are "disabled" devices Under the list of pickups, etc., right-click on an empty space and select "Show disconnected devices". Then a source called "Rec. reading" should appear. This IS stereo mix. Right click, activate it, and then you can select it as default device and use other applications, etc.

  If you still don't see it, you may be victim of a strange of Dell off the stereo mix on some laptops. Personally, I have a Studio 1537 with IDT and he enabled stereo mix, but Dell it restricted in the past on some computers thanks to the protection of copyright.

• Pavilion dv4-1435 "IDT High Audio CODEC for Windows xp.

  
  

  If you found that the sound was not working after reboot, follow the steps below

  1. download devcon command-line utility, here

  2. extract and copy the file into \i386\devcon.exedevconc:\windows\

  3. do the command line to restart MS - UAA automatically or just download this file

  The command-line as: C:\windows\devcon\i386\devcon.exe restart 'PCI VEN_8086 & DEV_293E & SUBSYS_3607103C & REV_03 '.

  Notes:

  1. the location of devcon.exe is c:\windows\devcon\i386\devcon.exe that if you change it, you must change idt.bat

  2. "PCI VEN_8086 & DEV_293E & SUBSYS_3607103C & REV_03' for MS - UAA hardware ID, if you found in another name change.

  3. place idt.bat in c:\Documents and Settings\All Users\Menu Menu\Programs\Startup

  4. the sound will restore within 6 to 10 seconds, because is NOT startup sound XP

• IDT - Audio - IDT High Definition Audio CODEC-updated, problems with the audio

  I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.

  Hey Andyy27,

  My HP Support Assistant tried to make me update this driver I have the computer in mid-August.  Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears.  Thahaseena, good to have you hear.  I am running Windows 7 family on a HP Pavilion dv6 Notebook PC.  After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.

  My driver date is January 13, 2010, version 6.10.6265.0.  It's one that I continue to back and it works.  I will install the update now and tell you what I get for audio driver is not working.

  The properties of my IDT HD Audio CODEC says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  You must restart your computer before the changes made to this device will come into force.

  New driver that disables my sound: June 17, 2010, version 6.10.6289.0.  Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).

• IDT High Definition Audio CODEC cannot be installed

  My COEDC of Audio IDT high definition worked very well, but a technician tried to fix my laptop webcam issuance after which he stopped working. In device manager it is yellow exclamation point in the "IDT High definition audio CODEC" driver under 'audio, video controller & game '. When I am uninstalling & put it back, it says 'impossible' to install. I tried everything to reinstall this (by the driver automatic update, Microsoft fixed, troubleshooting Microsoft, etc.) but that it is impossible to install. Can someone help me on this. I have windows 7 Professional.

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you have a problem with IDT High Definition Audio CODEC cannot be installed in the system.

  Certainly, I understand your concern and will try my best to help you.

  In order to understand the issue more clearly, I'll ask you to provide me with the following information.

  1. What is the brand and model of the computer?

  2. You did material important or changes to the software recently in the computer?

  This type of error occurs usually when there is corruption of system files on the computer. So, let us first check if this is due to all of the system files corrupted on your computer.

  Method 1:

  I suggest you to run the System File Checker analyzes and check if that helps.

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the tool (SFC.exe) System File Checker to scan files on your system and repair system missing or corrupted. files

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  If the problem persists, follow method 2

  Method 2:

  Try to update the audio drivers. How do it, please visit the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  If the problem persists, follow method 3

  Method 3:

  Please follow the steps to uninstall the device from Device Manager.

   

  1. Open the Device Manager

  2. Expand the section of its adapter .

  3. Find the Card Driver.

  4. Right-click to map its Driver and choose Uninstall.

  5. Select the check box delete the driver for this device.

   

  Please follow the steps to uninstall the drivers of device from the list of programs in the control panel.

  1. Click Start, select Control Panel

  2. Now, click on programs and select programs and features.

  3. Find the Card Driver.

  4. Right-click to map its Driver and select Uninstall.

  5. Restart the computer after the uninstall is complete.

  Also, download and install the latest drivers for the sound card on the manufacturer's Web site

   

  For reference:

  Please refer to the article below and check if it helps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  Hope this solves the problem.

  If the problem persists, you can write to us and we will be happy to help you further.

  Thank you

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound. Assistant support said HP idt high definition audio codec ERROR 52

  Laptop HP Pavilion G7-1273NR

  Windows 7 64 bit

  Error of IDT High Definition Audio CODEC 52

  Windows says "No. Audio Output Device is Found.

  Everything worked fine last night.  This morning he has no sound.

  I guess I have an audio driver damaged (corrupted how? I don't know.)

  Just reply with a link to a replacement driver, & and/or advise.

  Thank you.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• IDT High Definitipn Audio CODEC need driver for Win7

  Somehow my IDT High Definitipn driver Audio CODEC is missing and it is impossible to find a download ... little help, please?

  Hello

  If a dashboard device driver will be on the site of the manufacturer of the system (motherboard manufacturer
  for systems (custom). If a card it will be available on the website of the manufacturer of this card.

  If you have difficulty to locate the driver on these sites support email.

  Check here for some systems - IDT is now Tenpo

  Codecs HDA PC/laptop
  http://www.temposemi.com/products/PCLaptop-HD/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">