Error received during the update of the end in IOM date

Similar Questions

• Error received during the replacement of the DBAT connector

  Hello

  We have successfully uninstalled the DBAT connector.  During re - install, we received an error related to the targetsystems-lib in $MW /Oracle_IDM1/Server /ConnectorDefaultDirectory /targetsystems-lib/dbat-11.1.1. 5.0.

  We have renamed the lib-targetsystems for targetsystems-lib_SAVED and reinstalled the connector successfully.

  
  

  However, when you run the user DBAT reconciliation, we received an error message saying "no jdbc driver is found in the CLASSPATH.  We tried to restore the $MW /Oracle_IDM1/Server /ConnectorDefaultDirectory /targetsystems-lib/dbat-11.1.1. 5.0/ojdbc*.jar rear and set the CLASSPATH in the setDomainEnv.sh, restarted Server Admin and IOM managed server.  Still, there is no help.

  
  

  We always get the same error for putting into service or reconciliation.

  
  

  Is there a way to fix this, or do we need to uninstall and reinstall again?

  
  

  Thank you

  
  

  Khanh
  

  I highly recommend that install the server connector for use if you get errors class jdbc.  It will insulate the pot for you.

  -Kevin

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• An error occurred during the update error checking new Code 80072EFE

  An error occurred during the update error checking new Code 80072EFE

  error 80072EFE infected by a root

  Launch tdsskiller to find any rootkids, download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  your computer will restart automatelly and start up. Then run the updates.

• 57 a error code during the installation of Windows Update KB2598290

  Windows downloding this update, but allow to install this update

  57 a error code during the installation of Windows Update KB2598290

  Options-

  1. let your office product installation media in the drive and try to install the update.

  2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770

  3. repair Office and try to install the update.
      http://support.Microsoft.com/kb/924614

• Error occurs during the installation of the update.

  I am running Windows Vista and am trying to install an Itunes + Quicktime update. I check the box to the left of the selection and click INSTALL. It passes through the part of the DOWNLOAD process, where a download bar downstairs is green. Then all of a sudden, an error and it says:

  "An error occurred during the installation of the updates. If the problem persists, choose Tools > download only and try to install manually. »

  I'm going to uninstall Itunes to try and reinstall, but when I click on uninstall on the Control Panel, another error occurs.

  "Another program is installed. Please wait until the installation is completed and try to reinstall this software. »

  Im not to install anything well. Help, please

  Hello TXMADELATINO,

  I recommend that you download the Windows Installer Cleanup tool. Click here to download the utility. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Once you use the Windows Cleanup tool, then download the latest version of iTunes 9.1 and then try and reinstall your iTunes.

  If it does not help, you should contact Apple for support.
  http://www.Apple.com/support/iTunes/

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "module specified fixmHost.dll not found" error starting and error 0x8007054F during the update to itunes.

  Original title: error messages and the resolution.

  My question is twofold.  First of all, when I start my computer, I get a message that says "fixmHost.dll specified module could not be found.  I tried to restore my computer, running Vista several times, but I still get the message.

  The second question I have is when I tried to download a newer version of Itunes.  This error is a bit more complicated.  It reads "an error occurred during the installation of assembly Microsoft.VC80.CRT, version = 8.0.50727.4053, type = win32, public key token = architectures, processes or the 1fc8b3b9a1e28e3b ="x 86".  See Help and Support.  HRESULT: 0X8007054F.  Someone else has experienced this problem and how they have solved this problem?  Thank you very much.

  Hi nani318,

  DLL files allowing communication between files and devices, so that they obey orders. For example, a DLL under Windows Vista will enable communication between an executable file and a device, such as Microsoft Word and a printer.

  Use the (SFC.exe) System File Checker tool to determine which file is missing and try to recover the missing file.

  SFC scan
  http://support.Microsoft.com/kb/929833

  And issues with Itunes, you can follow the steps below.

  Step 1:

  Download and install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  Step 2:

  (A) uninstall all software iTunes program and features.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  (B) if that does not completely remove iTunes, you can follow the steps mentioned in the article.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
  http://support.Apple.com/kb/HT1923

  A similar question was considered in the Apple forums.

  http://discussions.Apple.com/message.jspa?MessageID=10526839

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error 0x800705b4 during the update to MSE

  Original title: time real os Protection disabled/when go to light (this option appears when the updated Microsoft Sec Esstls) _get Ox800705b4 error code

  Hello

  I'm not overyly computer knowledgeable, but work to change that. Hope someone can help to instruct me on how to solve this problem.

  Real-time protection is disabled, he said: when I upgrade my Microsoft without Essentials (the last 2 days has developed this statement)

  When I go to turn it on (this option appears when the updated Microsoft Sec Esstls), it won't work.

  Instead of this, I get an error code) 0x800705b4 & he sends me to help, but I can't understand the help.

  Help! (Thank you!)

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that you are getting the error 0x800705b4 during the passage of the protection on Microsoft Security Essentials. Let me ask you a few questions to understand the question.

  1. Do you have any other antivirus software installed on the computer outside of Microsoft Security Essentials?
  2. You did it no particular change in the computer before the show?
  3. What version of Microsoft Security Essentials has been installed?

  A this problem possible reason is that you have installed entirely or partially on the PC security software conflict.  Make sure that you have removed all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91

  Try Microsoft Security Essentials update and check if the problem still persists.

  Refer to: update your Microsoft antispyware and antimalware software

  If the problem persists, you may need to uninstall/reinstall Microsoft Security Essentials.

  See article for uninstall: Uninstall or change a program

  Restart the computer to ensure that the uninstall is complete.

  Install the latest version of Microsoft Security Essentials: Microsoft Security Essentials

  Hope the information is useful. Let us know the result, we will be happy to help you further.

  Thank you.

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  I am trying to convert a pdf to Word and continue to receive an error message "year error occurred during the attempt to access the service.  Any suggestions?

  Hey lee,

  Are you still facing this problem?

  Have you tried accessing the service by using the browser: http://cloud.acrobat.com/exportpdf

  Kind regards
  Rahul

• Setup AVG 1935 error. an error occurred during the installation of Assembly 'microsoft. VC90. ATL, version = "9.0.30729.4148", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32".

  Original title: uninstall avast anti virus and then install AVG anti virus

  I received the following error message when trying to install AVG anti virus after removing the 5.0 version 4.8 and installation, then after you uninstall 5.0, I tried AVG anti virus.     Error 1935. an error occurred during the installation of Assembly 'microsoft. VC90. ATL, version = "9.0.30729.4148", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32".  If anyone has encountered this before?

  Hello
  
  Before upgrade you to the next version of AVG you will need to disable the resident shield. See the article below for more information.
  3882 update AVG 9.0 from AVG 2011 fails with Error 1935
  http://www.Avg.com/ww-en/FAQ-print.Num-3882
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: An error occurred during the installation of the Assembly HRESULT: 0 x 80070002 during installation of iTunes 9.2.1

  Original title: iTunes error. Help, please? I'm desperate... (I posted this on Yahoo Answers, too, but I have received no help, so I go here)

  Hello

  I am trying to install iTunes 9.2.1 (for Vista 64-bit) on my laptop Vista x 64 bit. Whenever I have try and download it, however, it gives me this error: "an error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = * win32 ", publicKeyToken ="1fc8b3b9a1e18e3b"," processorArchitecture ="x 86". See Help and Support for more information. ' HRESULT: 0 X 80070002.

  Here is a picture:

  http://i37.Tinypic.com/144brrp.jpg

  I tried to solve it using various methods like using 7 - zip, download Microsoft Visual c ++ 2005, etc., but they do not seem to work... I don't have iTunes on my PC yet, just setting up because the facility retains default. Can someone help me please? I'm desperate...

  Here are the links that I tried to do my iTunes to work:

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/thread/beeceb19-69cc-4044-94F0-591feec04626/

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/c1359ee5-e18d-4512-8BFF-890936db2810

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/f4dd5033-9bcb-4788-B100-5e98bd80f6bf

  Hello myducks,

  To answer your question about the SFC command, follow these steps:

  First of all, we run System File Checker to see if you have a corrupt file system.

  Click Start
  Open an elevated command prompt.

  To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  At the command prompt, type the following command and press ENTER:

  SFC/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Then restart your system.

  Please see the article (KB) knowledge base if you find corrupted files:
  Article 929833 - how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  If you were able to successfully run the SFC, then run chkdsk:
  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  In this forum, we are unable to connect to your computer remotely to help solve your problem. However, if you feel you need more support, you may want to open a business of pension paid with Microsoft. I will include the support options below, so you can choose yourself.

  http://support.Microsoft.com/default.aspx?scid=fh;en-us; CNTACTMS

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread