Error recovery in the backup database
I got the following error to the standby database. No idea what this means and how can I get it without a full clone.Kills Aug 14 17:23:32 2012
Recovery Media Log /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc
Kills Aug 14 17:23:32 2012
Errors in the /spdata07/ora_11202/product/dbhome/rdbms/log/spdb_pr00_24915.trc file:
[ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
Completed: alter the managed standby database recovery database using the current log file disconnect from the session
Use ADRCI or Support established for the packaging of the incident.
See Note 411,1 to My Oracle Support to error and packaging details.
Errors with /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc newspaper
MRP0: Background Media Recovery terminated with error 600
Kills Aug 14 17:23:34 2012
Errors in the /spdata07/ora_11202/product/dbhome/rdbms/log/spdb_pr00_24915.trc file:
[ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
Managed Standby recovery not using real time applies
Recovery interrupted!
spdb_pr00_24915.TRC trace file:
Has started the recovery of parallel media
krsh.c 17:23:31.503 4265 2012-08-14
Managed Standby recovery to apply in real time
Dumping table incarnation of database:
RESETLOGS 0 Yvert and time: 22/05/2012 0x0000.00000001 20:55:23
Incarnation of recovery targets = 1, activation ID =-328156793
The flow buffer limit = 55611 min (50% x 111222, 100000)
2012-08-14 17:23:32.106
Start the recovery to the thread 1 ckpt SNA 26430758 logseq 11131 block 2
Initial size of the buffers: read 1024K, K 820 overflow, change 805K
2012-08-14 17:23:32.132
Add a Media Recovery redo thread 1
2012-08-14 17:23:32.249
Recovery Media Log /spdata07/SPDB/fra/FINSP_GDRSD_LISTENER_NL/archivelog/2012_08_10/o1_mf_1_11131_82bmbgvs_.arc
= Critical error (any incident) dump (ORA 600 [2619]) =.
2012-08-14 17:23:32.315
dbkedDefDump(): from the default crash dumps (flags = 0 x 0, level = 3, mask = 0 x 0)
-Error stack dump-
[ORA-00600: internal error code, arguments: [2619], [11131], [], [], [], [], [], [], [], [], []]
-SQL statement (none).
Run SQL information not available - no cursor.
-Call trace stack memory-
ORA-00600 = open an SR to MyOracleSupport.
Tags: Database
Similar Questions
-
While following this KB article, I came across an error. I googled a bit but it is really not a lot on that. This process took me the better part of a month to get to this day. Now all I have to do is migrate my databases and settings... However, as with everything else I came against from 4.0 to 4.1 (and building a new server to do), nothing seems to be going my way with this project.
Anyway, I executed the script of backup.bat several times and each time, it failed in the same place. The error given is "error: failure of the backup of the configuration of the vCenter Orchestrator." The log file has been attached. I rebooted, made sure that all VMware services have been arrested and still no joy.
Any help would be great! If this isn't the case, I'll have to make another call to the support team. I played with VMware products for years and I've never had to call until this project came. In this month alone, I opened 4 tickets!
2010-09-24
0723 EDT
I'm almost certain that this can be ignored without risk, especially if you do not use Orchestrator. I recently made a 4.1 migration to another server and got the same error - I had any issues at all.
-
upgrade from 3.2 to 4.1 - error handling for the unavailable database links
Hello
I have a 3.2-> upgrade problem 4.1 associated with error handling for the damaged database links.
I have a conditional button Exists on a page that contains a SQL query to related tables. However, for 10 minutes every day where the target of the link database becomes a cold backup, the query fails. In the apex 3.2 old, I just had an error within the region where the button is located but otherwise, the page was still visible:
"Is not valid/not exists condition: ORA-02068: following a serious error of MYDBLINK ORA-01034: ORACLE not available ORA-27101: there is no shared memory realm."
However, in the apex 4.1.0.00.32 I get the following unhandled error and click 'OK' brings me to the edit page when logged in as a developer.
that is, the page cannot run at all so that the links to the database fail to this one area.
Treatment of error condition.
ORA-12518: TNS:listener could not hand off client connection
Technical information (only visible for developers):
is_internal_error: true
apex_error_code: APEX. CONDITION. UNHANDLED_ERROR
ora_sqlcode:-12518
ora_sqlerrm: ORA-12518: TNS:listener could not hand off client connection
Component.type: APEX_APPLICATION_PAGE_REGIONS
Component.ID: 4
Component.Name: alerts today
error_backtrace:
ORA-06512: at "SYS." WWV_DBMS_SQL', line 1041
ORA-06512: at "APEX_040100.WWV_FLOW_DYNAMIC_EXEC", line 687
ORA-06512: at "APEX_040100.WWV_FLOW_CONDITIONS", line 272
Users generally see this:
Treatment of error condition.
ORA-01034: ORACLE not available ORA-02063: preceding the line of MYDBLINK
by clicking on 'OK' takes the user to another page, don't know how the Summit decides that, but not a concern at the moment.
I did a search and read the http://www.inside-oracle-apex.com/apex-4-1-error-handling-improvements-part-1/ page, but the new apex error handling is not clear to me, and I don't know if the apex_error_handling_example provided on this page would be applicable to this situation.Hello
It was my fault, I forgot that the code will be compiled on the fly which already fails if the table/view of deletion is not accessible. Nice that you found yourself workaround.
Concerning
Patrick
-----------
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf -
Original title: Registery Error Message
During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?
Hello
- What were the changes made before the problem occurred?
I recommend you perform the clean boot.
Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article. -
0x8100000A error message when the backup fails.
When my system tries to make a regular scheduled backup, I get the following error message:
The backup has failed.
An error has occurred. The following information can help you to resolve the error:
The last backup set cannot be found. Make sure it is accessible and it has not been deleted. Otherwise, create a new full backup. (0x8100000A)
How can I fix it?
I use Windows Vista Home Premium on an HP computer. Thank you.
http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx
Unlike what you said here, Vista Home Premium does NOT have a backup of the computer.
Read the info in the link above from Ms.You need Vista Business or Vista Ultimate or Enterprise Vista for backing up the computer.
Make the backup file.
See you soon.
Mick Murphy - Microsoft partner -
modify the INSTANCENAME parameter after the backup database
Hello
our primary database is configured as follows:
SQL > show parameter db_name;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_name string prod01
SQL > show the INSTANCENAME parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
instance_name string prod01the corresponding backup database is configured as:
SQL > show parameter db_name;
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_name string prod01
SQL > show the INSTANCENAME parameter
VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
instance_name string stbyprod01Now, the standby database must be enabled. Later, I want to change the stbyprod01 to prod01 INSTANCENAME parameter.
The question now is: what does take to change the INSTANCENAME parameter? In fact the database pending will be
already be activated and be considered and treated as a stand-alone database. The former primary database will be used no more.
I would like to do the following:
SQL > create pfile = 'initprod01.ora' of spfile;
SQL > shutdown immediate;
Oracle # > change the pfile file and change the stbyprod01 to prod01 INSTANCENAME parameter
SQL > startup;
SQL > create spfile = 'spfileprod01.ora' of pfile;
SQL > shutdown immediate;
SQL > startup;
That should be all - from my point of view (I know that LISTENER.) ORA and TNSNAMES. ORA should be modified, too).
If someone has already experiences with the INSTANCENAME parameter change but sees some additional configurations: Please let me know!
Rgds
Jan
1. you can use "alter system set instance_name" to change the value of the instance name.
2. you must do the following to activate the standby database (NOTE:-this is only for the activation of the backup database and not the passage to digital database)
1 startup nomount
2. change the base of Mount Eve.
3. change the database activate the database pending.
4. change the database open.
-
Hello
I'll put up the previous day datbase (9i release 2), I followed all the steps, the archived logs are transported
from the primary to the mode standby.
When I run sql > alter datbase opened read-only. at the rescue site, it gives the following error
ERROR on line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: ' C:\ORACLE\BKP\PAYROLL\SYSTEM01. DBF'
data files are located at "C:\ORACLE\BKP\".
but I'm not able to understand, where he adds directory pays its way
I checked pfile/spfile and re-created control file
It doesn't give any error at the point of Mount, but - opening in read only mode datbase error
his same showing different location of data files
SQL > select FILE #, CREATION_TIME, TS #, STATUS, ENABLED, NAME from v$ datafile;
FILE # CREATION_ TS # STATUS ENABLED NAME
---------- --------- ---------- ------- ---------- ------------------------------------------------------------
1 12 MAY 02 0 SYSTEM READ/WRITE C:\ORACLE\BKP\PAYROLL\SYSTEM01. DBF
2 12 MAY 02 1 READ/WRITE C:\ORACLE\BKP\PAYROLL\UNDOTBS01 ONLINE. DBF
3 12 MAY 02 3 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\CWMLITE01. DBF
4 12 MAY 02 4 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\DRSYS01. DBF
5 12 MAY 02 5 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\EXAMPLE01. DBF
6 12 MAY 02 6 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\INDX01. DBF
7-12 MAY 02 7 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\ODM01. DBF
8-12 MAY 02 8 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\TOOLS01. DBF
9-12 MAY 02 9 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\USERS01. DBF
10-12 MAY 02 10 ONLINE READ/WRITE C:\ORACLE\BKP\PAYROLL\XDB01. DBF
but the real place is C:\ORACLE\BKP\
Published by: user7864753 on October 19, 2009 17:33You use in your standby init.ora file parameter
DB_FILE_NAME_CONVERT='C:\oracle\oradata\','C:\oracle\bkp\
It takes DB_FILE_NAME_CONVERT = 'C:\oracle\oradata\payroll\','C:\oracle\bkp\
Make that change and try again. Before attempting to open the day before in mode readonly make sure that this expectation is able to run in managed mode.
As your alert.log file shows that whenever tryes standby to run in managed mode, it is written error. So, logacially, your standby configuration isn't always
completed. So, you cannot open the database pending. -
Using RMAN/Flashback to restore or passage / failover to the backup database
Hello
I'm new on the protection of the data. I read the documentation and have implemented the Data Guard for my database of test called PPRD. So I PPRD for the primary database and PPRD_DR0 for sleep.
I've implemented the custody of data with the default, maximum Performance. I'm testing. (That's 11 GR 2. I also use SQL/RMAN to set everything up. I can implement Grid Control to administer it.
What I was asking is - as the case may be, are there times where I'm better NOT do a failover to the standby? Given that the PPRD is in archivelog mode (of course) and we have full and incremental backups archivelogs all being written to the disc, AND my expectation is mode maximum performance... is there times where there was NO data loss by restoring the database and he recovering from RMAN? Indeed, recovery logs are intact, not if the first line of conduct?
Now, obviously if there is some sort of disaster and the primary is destroyed we would failover to our expectation. But for most typical failures, wouldn't we want to use RMAN and the backups/archivelogs as a first course, because there MAY be loss of data with the maximum performance mode? Also, I know there are views, that we can use to see how in sync is the day before, but I'm a little unclear on this. At the time of a database problem, if we do not have an automatic failover enabled and configured, exactly how can we check how to synchronize the standby is with the primary? (I know that this response is common and there, I don't want to ask the obvious question.)
Since I was in archivelog and flashback as well on mode the primary... If the primary is still intact (but has a problem) I use RMAN, flashback, etc. before making failover/switching in high school?
Thank you for any response.
Hello;
Yes. For me, a failover is a last resort. Ask yourself a few questions:
My company requires an availability of 100%?
How long the principal will be not not available?
How long and how to recover from failover?
I can make a move to the place?
Each year we turn off the room of servers for a weekend. What I do, it is a failover, then a switch after the old primary appears as the day before and catch up.
Here are my notes of failover test:
http://www.Visi.com/~mseberg/data_guard/Data_Guard_Failover_Test_using_SQL.PDF
This may help too:
Roll a standby forward using an RMAN backup to trouble The Nologging changes incremental (Doc ID 958181.1)
Best regards
mseberg
-
Hi gurus,
Had a small request for you guys, I have a production and a configuration of standby on Windows 2003 (10.2.0.4) database, my day has been recovered up to archive log 883, because of some problems with my production, I activated my database pending. Because the standby mode is enabled, the database gets open resetlogs. My archives to start generating sequences 1,2,3...
But now when I query v$ archived_log to verify that the sequence max # generated it still shows as 883... as opposed to 6 which is my creation of journal number of archive.
According to my understanding, when activate us a backup database, the wait flag of database in the control file is reset so that the control file behaves like that of the production database (I know that I am using profane taps here)... so, what makes the view v$ archived_log show the old value of sequence # before activation rather than the new value after activation?
Help or direction in this on your side you would know...
Thank you
AurélieInteresting...
I think why you faced with this is, the v$ archived_log retrieves the information from the control file and the control file keeps the information up to it's minimum (default 7 days) retention period. Now even if you did resetlog on the database, the old are always stored in the controlfile according to its retention period, controlled by the parameter "control_file_record_keep_time". Please refer to 'archive log list' for the correct sequence number.
C:\Documents and Settings\sakumar>set oracle_sid=santu C:\Documents and Settings\sakumar>sqlplus /nolog SQL*Plus: Release 11.1.0.6.0 - Production on Sat Feb 6 07:17:16 2010 Copyright (c) 1982, 2007, Oracle. All rights reserved. SQL> conn /as sysdba Connected. SQL> shu immediate Database closed. Database dismounted. ORACLE instance shut down. SQL> startup mount ORACLE instance started. Total System Global Area 535662592 bytes Fixed Size 1334380 bytes Variable Size 176161684 bytes Database Buffers 352321536 bytes Redo Buffers 5844992 bytes Database mounted. SQL> recover database until cancel; Media recovery complete. SQL> alter database open resetlogs; Database altered. SQL> select max(sequence#) from v$archived_log; MAX(SEQUENCE#) -------------- 16 SQL> archive log list Database log mode Archive Mode Automatic archival Enabled Archive destination USE_DB_RECOVERY_FILE_DEST Oldest online log sequence 1 Next log sequence to archive 1 Current log sequence 1 SQL>
I hope that's what you wanted to ask. Now once again, it would be interesting to see what the result of the query on v$ archived_log after the retention period.
Kind regards
S.K. -
vFoglight 6.6.1 - ERROR: failure in the embedded database exec process
Hello
I use vFoglight 1.5 successfully for years on Linux (Ubuntu 12.04, I know, it is not supported).
Today, I rebooted the server und vFoglight will not work. The mySQL-database shipped
Cannot start with the beginning of the fms (fms - demon). I found the following errors in the ManagementServerlogs:
2013-09-04 12:36:09.919 OF INFORMATION [hand] com.quest.nitro.service.ServiceMBeanUtil - database Lifecycle Service from... 2013-09-04 12:36:10.294 OF INFORMATION [hand] com.quest.nitro.db.EmbeddedDatabaseManager - startup of the embedded database... 2013-09-04 12:36:10.306 ERROR [main] QcnUtil/src/unix/qcn_message_unix - (internal error) cannot connect taken for the transmission of messages A/tmp/qcnprocessrunner-236164eeefd265647258c4d174c8644e.msg: connection refused
2013-09-04 12:36:10.306 ERROR [main] com.quest.nitro.db.EmbeddedDatabaseManager - cannot execute the command: {0}
java.io.IOException: could not send message to communication inter-lanceur. Check the logs for more information.
at com.quest.common.launcher.message.MessageHandler.sendMessage (Native Method) at com.quest.common.launcher.runner.ProcessRunner.sendMessage(ProcessRunner.java:398) at com.quest.common.launcher.runner.ProcessRunner.execInternal(ProcessRunner.java:275) at com.quest.common.launcher.runner.ProcessRunner.exec(ProcessRunner.java:210) at com.quest.nitro.db.EmbeddedDatabaseManager.run(EmbeddedDatabaseManager.java:407) at com.quest.nitro.db.EmbeddedDatabaseManager.runAndWait(EmbeddedDatabaseManager.java:390) at com.quest.nitro.db.EmbeddedDatabaseManager.startup(EmbeddedDatabaseManager.java:438) at com.quest.nitro.service.embeddeddb.EmbeddedDbService.startService(EmbeddedDbService.java:48) I stopped the delete of und fms service that do not all .msg files in / tmp, but the beginning.
Can you help me
Best regards
Maik
Hi Thomas,
Yes, the FMS was launched as root.
The problem is now solved, another program is supposed to block all ports.
I stop without the "loft" (a mail server) process and vFog then started
problems. If dovecot begins before vFog, then vFog will not start, he works the
other way around. Very strange. F * pushy, I want my System V Init return.
Better compliance
Maik
-
How to activate the Guard Data after test on the backup database
Hi all
I have a plan for the test of standby database and this is my plan
1. check the gap newspaper archive and transfer the logs to check if necessary
2. stop the replication Data Guard
3 stop Standby Database
4 back-up Standby Database before the test
5. starting Standby Database to test (and main database fixed by using the user and performs operations during testing)
After trials and Active Data Guard
1 restore a database to the standby since before the backup set
2. start Standby Database in the mode standby
3. check Data Guard
I have a question. Can I use log archiving of primary to apply pending before activate Data Guard? or must reconfigure DataGuard to activate Data Guard after having tested?
Thank you
Hiko
Yes you can do it.
following the procedure below.
1 apply the logs to archive left on the previous day.
2. the database pending judgment.
3. take backup controlfile and data files.
4. start the database in the editing phase.
5. turn on the standby database. 'alter database activate standby database'
6. then do what ever you want to test.
7. once it is filled the database ensures activated.
8. restoration of the database from the backup.
9. then start appplying archive of the last archive applied before the database was arrested.
-
The total size of the backup database and Total database size.
Hi Experts,
How can I find the size of the size of the database and the size of the backup with only the RMAN catalog help.
I use Oracle 10.2.0.5. and Tivoli TSM
I haveHello
See this doc...
http://download.Oracle.com/docs/CD/B28359_01/backup.111/b28270/rcmreprt.htm#CHDBIGHGConnect to SQL * for the database you intend to question the backup history.
Ask the view V$ RMAN_BACKUP_JOB_DETAILS for more information on the backup type, status, and the start and end time.
The following query shows the history of the backup jobs sorted by the session key, which is the primary key for the RMAN session:
COL STATUS FORMAT a9 COL hrs FORMAT 999.99 SELECT SESSION_KEY, INPUT_TYPE, STATUS, TO_CHAR(START_TIME,'mm/dd/yy hh24:mi') start_time, TO_CHAR(END_TIME,'mm/dd/yy hh24:mi') end_time, ELAPSED_SECONDS/3600 hrs FROM V$RMAN_BACKUP_JOB_DETAILS ORDER BY SESSION_KEY;
Ask the view RMAN_BACKUP_JOB_DETAILS V$ at the rate of tasks of backup in an RMAN session.
The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.
COL in_sec FORMAT a10 COL out_sec FORMAT a10 COL TIME_TAKEN_DISPLAY FORMAT a10 SELECT SESSION_KEY, OPTIMIZED, COMPRESSION_RATIO, INPUT_BYTES_PER_SEC_DISPLAY in_sec, OUTPUT_BYTES_PER_SEC_DISPLAY out_sec, TIME_TAKEN_DISPLAY FROM V$RMAN_BACKUP_JOB_DETAILS ORDER BY SESSION_KEY;
Ask the view RMAN_BACKUP_JOB_DETAILS V$ for the size of the backups in an RMAN session.
If you run the DATABASE BACKUP, then V$ RMAN_BACKUP_JOB_DETAILS. OUTPUT_BYTES indicates the total size of backup games written by the backup task for the database that you are backing up. To view the backup set sizes for all registered databases, ask RC_RMAN_BACKUP_JOB_DETAILS.
The following query shows the speed of backup job sorted by the session key, the primary key of the RMAN session. The in_sec and out_sec columns columns display the input data and output per second.
COL in_size FORMAT a10 COL out_size FORMAT a10 SELECT SESSION_KEY, INPUT_TYPE, COMPRESSION_RATIO, INPUT_BYTES_DISPLAY in_size, OUTPUT_BYTES_DISPLAY out_size FROM V$RMAN_BACKUP_JOB_DETAILS ORDER BY SESSION_KEY;
The following sample output shows the speed of the backup jobs:
I hope this will help...
Kind regards
Levi Pereira -
the backup database must be restored after failover and flashback 11
I tried a failover with 11g r2 and RAC. Failover worked. I have flashed then return of the database (old primary) according to this http://docs.oracle.com/cd/E11882_01/server.112/e17022/scenarios.htm#i1049997, and now is the archiveurs application again.
The problem is in the broker, it says this
I tried deactivating and reactivating the configuration, but still the same. Any other ideas?DGMGRL> show configuration; Configuration - DG_Config Protection Mode: MaxPerformance Databases: DB11G_STBY - Primary database DB11G - Physical standby database (disabled) ORA-16661: the standby database needs to be reinstated Fast-Start Failover: DISABLED Configuration Status: SUCCESS
Here's a link [url http://nikolayivankin.wordpress.com/2012/02/14/dgmgrl-reinstating-ex-primary-to-standby-by-flashback-database-feature/] a demo, your theme
-
content and the backup database
How can I backup my database and the Web site content? Can I configure scheduled backups?
Hello
BC is not a tool of backup schedule. How you will back up data is to follow the migration article.
- http://kb.worldsecuresystems.com/203/bc_2038.html
Please note BC keep a daily backup of your site, but is only a restoration of disaster recovery (system failure, etc.).
Kind regards
-Sidney
-
I am facing one or the other problem while taking backup. Help me please take backup. There are always one or the other problem...
Hello
Thank you for using the Microsoft Windows Vista Forums.
Follow the instructions that might help you resolve the issue.
Method 1:
This problem may occur because of the security of the software.
Let us try to disable the Antivirus security software and check if the problem is resolved.
Re-enable the security software after checking the issue.
Alternatively, you can try to disable the firewall and see if the problem is resolved.
Re-enable the firewall after checking the issue.
Method 2:
Follow the instructions to run the chkdsk command, which might help you resolve the issue.
- Click Start, type cmd in the Search box, right-click cmd in the programs list, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password, or click continue.
- At the command prompt, type Chkdsk/r, and press ENTER.
- Press y when you are prompted to check the drive the next time the system restarts.
- Close all applications and restart the computer.
Note When you restart, Windows checks the drive for errors, and then starts.
Check whether the problem is resolved.
Back up your files
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
Backup and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP
Maybe you are looking for
-
Satellite M30-604: how to burn on DVD - RW?
Hello I was wondering if someone could show me how to use the DVD - RW in the Toshiba M30 604. I know how to record on a CD. Simply, do a right click, send on a DVD - RW and then inside the window, click on write these files to CD. However, when I pl
-
IRQL_NOT_LESS_OR_EQUAL Error with BSOD error
Hello I get the IRQL_NOT_LESS_OR_EQUAL Error with blue screen when I start the machine.STOP: 0X0000000A (0X00000000, 0X804DC11D, 0X00000001, 0 X 000000002) I can't that connection in Debugging Mode.winDBG output points to a file PxHelp20.sys, which i
-
OfficeJet 6500 a more Macbook operating system is Mountain Lion 10.8.2 connected wireless via the network. In black and white how fine scans and that make the settings I change to scan in color?
-
Copy / import photos from SD on USB. Error 0 x 80070052.
I am unable to copy or import photos from my SD card to a USB. Error message 0 x 80070052 leaves all the time. Can anyone help please?
-
printer labels ZEBRA GX420T and Windows 7
Need serious help! We have a Zebra GX420T label printer that runs on a computer running Windows XP with IE8, installed a printer GX420t printer with the latest drivers from the Zebra EPL and shared on the same USB port of the printer generic/text pri