Similar Questions

• sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

  I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

  Hi superconfused123,

  This problem occurs because of a design limitation in the tape recorder.

  You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get this error message on photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Could not help people talk to adobe. Does Any

  I get the following error message when I open photoshop cs6 "one or more files in the Adobe Application Support folder necessary to the operation of photoshop are missing. ' Run the photoshop Installer and re-install photoshop. Chat room Adobe could not help. I don't have a disc - it has been downloaded online. Does anyone have a suggestion?

  Hello

  Try re-download Photoshop CS6 license with your serial key and the link below:

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

• 3.0.0 error: "cannot publish or run one or more applications.

  Hi all.

  I'm under Fusion 3.0.0 with for the time trial license key.

  All my VM to 2.0.6 seem to have imported 3.0.0 with no problems, but my XP VM gives me an error message VMware once Office XP computer finished loading: "Impossible to post or run one or more applications."  The version of VMware Tools that comes with 3.0.0 is installed.  If I click OK to the error message, it goes and everything seems to be normal.  I wonder why I get this message and how the problem can be corrected.

  A screenshot is attached.

  Thank you in advance for your help!

  Hi, the good news is that if you run no Fusion in Unity mode then this error can be ignored.

  The bad news is that there are a number of issues that can cause this error and the error will be displayed every time your execution of merger.

  If you have time it would help us if you could do the following:

  -Send us information of support. Running help-> support Collect Information. Send the file to [email protected]

  -in the email include a list of all programs that you have installed

  Thank you

  Sailesh

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Vista is not all important security updates. Error message that says that one or more components of Windows Update are configured incorrectly.

  I have tried to trouble IT 50202, but which failed due to the error 2678!  Support center has no solution.  Microsoft site does not have its own error code 2678.  Ridiculous.

  This was a huge waste of time and effort because he tries and fails to reinstall everytime I stop.

  RECAP:

  • You bought the computer in January 2009;
  • The computer came with a preinstalled free McAfee;
  • A McAfee application was permanently installed until you have installed Microsoft Security Essentials (MSE) on 23 August 2012;
  • You first met the problems associated with malware (according to MBAM) in June 2010, the first year of your McAfee subscription.
  • You have problems with Windows Update (MSE) on October 12, 2013, more than a year after you have installed MSE;
  • You have improved the pre-installed McAfee free trial to the full version rather than uninstall the free trialware, running the tool to remove McAfee & then make a clean installation of the paid version.
  • You have uninstalled the McAfee application until you have installed MSE but you don't not download/run the removal tool from McAfee before installing MSE.

  MY HUMBLE OPINION...

  • It was too late for the "come to the rescue" McAfee removal tool here.
  • There is a possibility, but remote, you see the effects of an infection for a long time of a certain type (because MSE has not been installed correctly & so never worked properly due to 'remains' of McAfee).
  • The computer must be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Then what are you doing now?

  OPTION A: You can get Microsoft-sponsored Premium (i.e., paid) supported by the Office of response-online http://answerdesk.microsoftstore.com [1]

  OPTION B (highly recommended): see the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the clean install, please start your own new thread in this forum & advice: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the local computer, reputable and independent (i.e., not a 'BigBoxStore' or Geek Squad!) computer repair shop & let them do the work.

  OPTION C: Bite the bullet & buy a new computer (Win7).

  • If you want to transfer your personal data to the new computer, backup data from one or more DVDs (no shine). Perform analyses considered at least two 2 online (e.g., ESET;) Kaspersky; Bit Defender) of the DVD (s) before you transfer the data to the new computer.

  Wish I had better news for you, Roz.  Good luck!  On & off...

  =================================================
  [1] $99.00 USD for up to (1) hour of distance support; tax must be paid in advance; no guarantee whatsoever

• "ERROR importing user (#) with extension = #: the requested operation would result in a violation of license."

  When you try to import new users to the voicemail system we now get this error.

  At the same time, we had to remove a user, and then it started. Here is the license report

  License unit Distribution feature phone

  License server	Units permitted	Units used	Remaining units	Units pending
  10.7.1.130	1100	440	660	0
  Total number of units for the function	1100	440	660	0

  Licenses for the CCMS node function

  License server	Units permitted	Units used	Remaining units
  10.7.1.130	2	2	0
  Total number of units for the function	2	2	0

  Version of software license

  License server	SW version
  10.7.1.130	7.0

  We have many units of license on the left...

  BTW # is just a placemarker for the user name and extension, the error includes the correct information.

  Any ideas?

  Thank you!

  Those who resemble licenses CUCM (phone), no e-mail voice licenses.

  Assuming you are using the connection of the unit as the voicemail, check on this server. Connection of the unit uses separate licenses for CUCM.

  Barry

• Failure of one or more shares of post-processing. For more details, see the OPP service log.

  Hi all

  We run personalized printing invoice selected program. Get the message in the message below

  +------------- 1) PUBLISH -------------+

  Post-processing of application 30224196 on node TEST on February 16, 2016 10:25:35.

  Post-processing of application 30224196 a failed February 16, 2016 10:25:35 with the error message:

  Failure of one or more shares of post-processing. For more details, see the OPP service log.

  +--------------------------------------+

  +------------- 2) PRINT   -------------+

  Does not print is not the output of this application because the post-processing has not.

  +--------------------------------------+

  [16/02/16 08:47:06] [235162:RT30224178] The execution of the actions of post-processing for request 30224178.

  [16/02/16 08:47:06] [235162:RT30224178] From XML Publisher postprocessing action.

  [16/02/16 08:47:06] [235162:RT30224178]

  Model code: FLTARSELXML

  Model app: ABC

  Language: en

  Territory: U.S.

  Output type: PDF

  [16/02/16 08:47:11] [235162:RT30224178] Output file has been found but is zero size - deleted

  [16/02/16 08:47:11] [UNEXPECTED] [235162:RT30224178] java.lang.reflect.InvocationTargetException

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:570)

  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:235)

  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)

  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)

  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)

  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)

  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)

  at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)

  at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)

  Caused by: java.io.UTFDataFormatException: invalid UTF8 coding.

  at oracle.xdo.parser.v2.XMLUTF8Reader.checkUTF8Byte(XMLUTF8Reader.java:160)

  at oracle.xdo.parser.v2.XMLUTF8Reader.readUTF8Char(XMLUTF8Reader.java:175)

  at oracle.xdo.parser.v2.XMLUTF8Reader.fillBuffer(XMLUTF8Reader.java:120)

  at oracle.xdo.parser.v2.XMLByteReader.saveBuffer(XMLByteReader.java:450)

  at oracle.xdo.parser.v2.XMLReader.fillBuffer(XMLReader.java:2294)

  at oracle.xdo.parser.v2.XMLReader.skipWhiteSpace(XMLReader.java:2039)

  at oracle.xdo.parser.v2.NonValidatingParser.parseMisc(NonValidatingParser.java:355)

  at oracle.xdo.parser.v2.NonValidatingParser.parseProlog(NonValidatingParser.java:324)

  at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:284)

  at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)

  ... more than 17

  Oracle Applications: 12.1.3

  As per Doc-ID 1626049.1 ,

  < pl moderator Edit - deleted section CAUSE of the above MOS Doc - don't post content MOS Doc - this is a violation of your Support contract >

  The same files are processed in another instance of instance test also.

  Thanks for your help srini.

  I found the solution.

  Caused by: java.io.UTFDataFormatException: invalid UTF8 coding.

  
  

  Some--> binary in WINSCP or PSFTP transfer settings

  Before ? >

  Now changed to encoding = "iso-8859-1"? >

  
  

  In the property report Module: settings XML--> XML prologue value--> encoding = "iso-8859-1"? >

  Now it works fine.

• one or more wells data void / vi

  I have a sub vi that opens to the main start of the vi.  The user enters data about the serial number of the product, the model of the product, ect., then press OK.

  The sub vi closes and disappears.  It works well, the thing that doesn't work is the outputs.  They are connected to the select inputs for some structures of the case, and I get an error, "this wire connects to one or more data dark but has no source.

  I don't think it makes sense since the indicators of the Sub vi are actually the source for case structures.

  Probably I'm missing something easy.

  Each Subvi itself used as a directional reference to its part of connector terminals.  If the serial number control is a sink (data go in the Subvi) and serial number 2 is a source (data leave the Subvi).

  Your Subvi includes only the entries = sinks (even if some of them are on the right side) and no output = sources.  Look at the picture to context-sensitive help: it shows all connections going to the left.

  Your loop should also have a small wait to avoid consuming all the resources of the CPU while it is running.  A structure of the event would be better.

  Lynn

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Cannot install Windows 7 error "partition must contain one or more dynamic volume...". ».

  I have windows 7 installed on my pc.

  When I updated my system driver in Device Manager, he demanded to restart.

  When I restart my pc, it does not restart "windows error recovery".

  I tried every possible means to recover my pc, but all fails.

  Finally, I tried to reinstall windows 7

  but, when all the files have been expanded

  After that, he says "windows cannot update Installing boot configuration could not proceed.

  but I am able to start mu computer through safe mode.

  company-hp

  model No. - p6-2020ix

  pls hel me out.

  Original title: partition contains one or more dynamic volumes

  Hello

  Rather than create new threads for each answer, I suggest you post your reply in the main thread. This helps help you the better.

  For your reference, the original thread is:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/partition-contain-one-or-more-dynamic-volumes/c3027f83-5f02-4dd2-802b-2e3d4314edc6

  (1) what is the complete or exact error message?

  (2) what is the serial number and the model of the hard disk on which you try to install the Windows 7 operating system?

  Note: Dynamic disk function is not supported for editions of Windows 7 Home Premium, Windows 7 Starter and Windows 7 Home Basic.

  (3) what is the edition of Windows7 installed in the computer?

  Try the methods suggested in the article below and check after each method:

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2:

  http://support.Microsoft.com/kb/927520

  Warning for the disk check: when running chkdsk (Check Disk) disk hard, if bad sectors are found on the hard drive and then chkdsk attempts to repair this sector. And if no data is available on this sector can be lost.

  Warning in the BIOS: Basic Input Output system (BIOS) to change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful.

• Submission error when one or more check boxes are archived in a table

  Hello world

  I need generate id in the following format:

  ID = "f01_0001_01".

  ID = "f01_0002_01".

  ID = "f01_0003_01".

  ID = "f01_0004_01".

  ID = "f01_0005_01".

  ...

  ...

  So I use APEX_ITEM. CHECKBOX in my SELECT statement and report attributes I check the option 'Simple' as display type. The HTML code is generated as follows:

  < input name = "f01_NOSUBMIT" value = "" id = "f01_0002_01" onclick = "if (this.checked) {apex.jQuery('#f01_0002').val (») ;} else {apex.jQuery('#f01_0002').val (») ;} "type ="checkbox">

  When I check one or more boxes to tick and send the page I get the following error:

  Not found

  The requested URL /apex/wwv_flow.accept was not found on this server

  Question 1:

  Any ideas how I can fix this problem?

  Question 2:

  Is there a way to generate entry hidden with numeric values such as:

  0001

  0002

  0003

  0004

  ... etc.

  Thanks in advance for your help

  RooBie

  Yes, you can use apex_item.checkbox in a type of "Report of the PL/SQL function, SQL query" report.

  The sql statement that is returned would look like:

  select apex_item.checkbox(1,zap.value)
  from    qu_zapping zap
  etc.
  

  However, I'm a bit confused. In your first post you said:

  So I use APEX_ITEM. CHECKBOX in my SELECT statement and report attributes I check the option 'Simple' as display type.

  And now you ask if you can use apex_item. Which suggests that you're not real using apex_item already.

  If you can't wheren using APEX_ITEM. BOX, but only the display type "Simple checkbox" and the javascript code works.

  Then the error may not be because of the box at all.

  The number of rows and the number of items per line you have. It could be that you submit to many settings.

  HTTP 400 - Bad request Page not found when sending tabular

  "Page not found" error when presenting tabular

  Nicolette

• Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

  Hi all

  I can't open a project PP without this error message that appears:

  "The preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the preset original, exit the application without saving the project, reinstall all third-party components that are needed, and reopen the project'.»

  What I had been doing before that to happen was a PP project using sequences ProRes for editing and editing multicamera. Several cameras didn't work very well and after a few attempts of difficulty that I gave up and finished the work of cutting 3 layers of video instead. SOUL refused to make the finished three lasting more than 1 hr sequences so rendered video sequences PP. finals

  I tried to remove the plists for SOUL, PP and QT repair disk permissions and restarted, but there was no improvement.

  Customer is satisfied for now, but will want to return on this work to a later date so decided to uninstall and reinstall SOUL and PP in the hope that the two would be willing to work properly when needed again. SOUL works very well in conjunction with another PP project, but now I can't open the PP project in question without the above error message appears.

  After searching on the net, it seems that the problem may be caused by ProRes but I could not find a definitive solution to the problem. Does anyone know either:

  1. How do I solve this problem?

  2. If I chose the "modified by using a custom sequence parameter", can I be sure that my footage will look the same, even if they do not use ProRes? The final format of the deliverable will be mp4 so as long as the overall appearance does not change so I can afford a change in the edit codec. It's just that with three sequences of more than an hour long, I don't want working days to be ruined.

  Other older PP projects of mine open and work properly.

  First CC 8.2.0 Pro

  Media encode CC 8.2.0.54

  10.10.2 OSX

  Any help would be greatly appreciated.

  Duncan.

  Web chat Adobe find a solution.

  Open the PP. project

  Export your project or the sequence in Final Cut Pro XML form.

  Set up a new project PP.

  Import Final Cut Pro XML file.

  This will take you to the top race.

  Since getting back to this publishing project, I found that some things will be lost or change using XML:

  You will lose the position key framing, black video clips, dissolve fx, audio levels, dynamic audio fx, the possibility to open a multi camera clip and change the display of the camera.

  You keep the cut points, crop fx.

  Not perfect but only took a few hours to save 3 working days.

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.