Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

Similar Questions

• Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs, with, I try to attach a PDF file to emails.  Any thoughts?  Apple could not help.

  Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when you try to attach a PDF file to emails.  Apple was not able to solve.  Any thoughts?

  It is not broken, just confused. The recipient must save the file and open it in Adobe Reader. Your e-mail application is not using Adobe Reader.

• After extraction of CD 12, you will now receive an error saying: "Windows Media cannot extract one or more tracks on this CD.

  I pulled about 12 CD, and now everything suddenly, I get a pop up that reads "WINDOWS MEDIACANNOT ONE or MORE RACKSFROM CE CD RIP ' does that mean?

  I had the same and it drove me nuts for days!

  I found this solution and it worked and everything is back to normal now :)

  Go to Tools - Options - Rip music and see if you have a location, that music is being ripped off. I did not when I looked, it was empty.

  Then go to organize - manage libraries - music, it should be a location of folder of music here, otherwise click on "add" button and add the music folder.

  Now do the same for the other 3 libraries, videos, pictures and recorded tv, all should have places, remove those without a location.

  try to check out again.

  I hope like me you will be out of service again.

  Thanks Andy!

• What to do about CHKDSK message "volume appears to contain one or more unrecoverable problems".

  My XP Home just quit starting all along.  Previoously before leaving he would do a CHKDSK scan and then go over to start.  Now, it closes a few seconds after the Windows screen comes up with the dots that runs through.  The Windows image stays on the screen, but nothing else happens.  I put in my XP disk to run the repair and got at the C:\Windows prompt after all the various commands of the finish.  Then I typed CHKDSK and Enter.  The first time that CHKDSK has stopped 38% full.  The 2nd time it finished and gave me the error message: "volume appears to contain one or more unrecoverable problems".

  I sure would appreciate it if someone can suggest my next move to get XP running back?

  http://www.computerhope.com/issues/ch001214.htm Hope this helps, Gerry Cornell

• CC of Dreamweaver generates one of the 3 error messages when you use find and replace on 8.1 Win 64 bit.

  CC of Dreamweaver generates one of the 3 error messages when you use find and replace is used more than twice in a row. "While executing onLoad in bc_afterSave.htm, the following JavaScript error occurred: at line 188 of file C:\Program Files (x 86) \Adobe|. Adobe DreamweaverCC | Configuration | Shared | ' BC\JS\bc_sites.js': out of memory.

  or

  When executing RunCommand in File_Save.htm, a JavaScript erroroccurred.

  or

  While exciting getDynamicContent inAdressURL.htm, an erroroccirred of Javascript.

  Any thought - I find myself CBWMS of closing and reopening. Will work for the other two find and replace once again before the popup of messaged\s error.

  Cough, cough, cough - 38 500 pages? !  Really?  It's a big site!

  I'm not surprised, that you are short of memory.  Try to limit your F & R records or select files rather than the entire Site.

  Nancy O.

• rror message "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence. »

  Hi - I am trying to open a Premiere Pro file I was working on yesterday and am getting the error message "this project contained a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence... "I also tried to open the file where I had worked the day before and made no changes to, that is the source for the file modified yesterday, and it gives the same error message. Help, please. I'm on the next-to-last version of Premiere Pro, I don't have a day in the past two weeks, but I am currently in the previous version. Windows 8.1, 16 GB ram, i7 3.4GHz. Thanks in advance for any help you can offer.

  Thanks for the link, John T., but it's not having the latest version of office installed CC. As I'm in the middle of a project, I have not yet put to update to the latest version of CAPRINE contagious pleuropneumonia, nor any of the other new versions. Apparently, the new version of Office CC is required for authentication. Could someone suggest to people from Adobe which is perhaps a more telling error message: "You must update your desktop creative cloud app."?  Thanks for the help.

• You met the C00D10D1 error message when you use Windows Media Player

  Hello

  I have no sound through Windows Media Player and also a player from Youtube and BBCi.  I have the following error message, please notify :-)

  You met the C00D10D1 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Codec is missing

  Windows Media Player cannot play the file (or can't play the part of the file either audio or video) because theMP3 - codec MPEG Layer III (55) is not installed on your computer.

  The missing codec may be available for download on the Internet. For more information about codecs, seeCodecs: frequently asked questions.

  Hello
   
   
  1. What is the file type or extension that you try to play?
  
  If you get a message stating that your computer is missing a codec, you are probably trying to play, burn, or sync a file that was compressed by using a codec that does not include Windows or the default player. You will need to download codecs.
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948
   
  Package of Installation of codec
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en
   
  See also:
  Windows Media Player C00D10D1 error: MP3 - MPEG Layer III (55)
  http://Windows.Microsoft.com/en-us/Windows7/C00D10D1-55
   
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions
  Note: The above are published in the Windows 7 category, but they apply to Windows XP too.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• Whenever I want to use Camera Raw preferences, I get the message "the original application of the bridge is not active. How can I fix?

  Whenever I want to use Camera Raw preferences, I get the message "the original application of the bridge is not active. How can I fix?

  Hi yvesd,

  What version of the bridge are you using?

  • Please close bridge
  • Open Photoshop
  • Open a picture
  • Select the file > Browse in Bridge

  Also, make sure that you have compatible versions of Bridge and Photoshop, as if you use Bridge CC, make sure that Photoshop CC (latest) is installed.

  Kind regards

  Assani

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot use disk, error: Disc Copier could not find a CD-ROM drive supported. You will not be able to make copies of the disc to another.

  Original title: follow question Winsows XP repair

  I get following messages is displayed when I try to use disk functions.  #1 API can not see all CD ROMS in the system, please check to see if they are properly plugged...

  #2 disc copy could not find a CD-ROM drive supported.  You will not be able to make copies of the disc to another.

  Should I take the modem to a computer repair shop to get this repaired?

  Hello

  I suggest to refer to the procedure described in the following article and check the status of the issue.

  Error messages occur when you run Easy CD Creator in Windows XP.

  http://support.Microsoft.com/kb/285910

• Error message "the system cannot find the environment option that was entered.

  I'm having a problem to launch programs on my system. I have Windows vista. Whenever I try to run any program on my computer, I get an error message that says: "the system could not find the environment option that was entered." He won't let me do things like: update of the parental control settings, System Restore, uninstall programs, install downloads, run antivirus software, ect. I tried to use the advice given in this forum without success. The system won't let me use the run as Administrator option and no longer recognizes my account administrator. I've lost my Vista boot drive, so I can't use it to repair the computer. I am at the end of the roll and can't not think of anything else to do, but my computer reset it back to default settings. Any advice would be greatly appreciated.

  Do you have a recovery disk (unless you have an already or that you have an Installation of Windows Vista genuine disc) using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning like software: http://www.snapfiles.com/get/active-isoburner.html and of course a blank CD.  This recovery disk will allow you to do the Startup Repair and system restore. You may need to change the BIOS to do the CD drive first in the boot sequence.  It was boot the PC and wait for the screen where it shows the F key to enter the menu start or start of installation.  Push it quickly. Make the change, save your work and exit.  Insert the CD into the drive and restart.  When you are prompted, press a key to start the PC.

  Try a system restore to a point BEFORE this problem started to occur.  Here's how: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Check the box to show more than 5 days of restore points.  If this does not work, try an earlier point or two.

  If this does not work, do a startup repair, boot from the Installation of Windows Vista genuine disc or your recovery disk. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.

  If you don't have a floppy, you can make a recovery disk to http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ using a burning like software: http://www.snapfiles.com/get/active-isoburner.html and of course a blank CD.  This recovery file is just as good as one that comes with Vista, but it can't do a reinstall.  You can do a system restore or startup repair or even use the command prompt.  Boot from the CD may be your only option, because you are not an administrator and therefore cannot do these functions in normal mode.

  Let's see if it works before moving on to other troubleshooting options.

  Good luck and I hope this works!

  Lorien - a - MCSE/MCSA/network + / A +.

• BearShare download for music downloads, I tried to uninstall it but I keep an error message saying be used.

  original title: impossible to uninstall a program

  I downloaded Bearshare music downloads and agreed I don't love him. He took my homepage and has no music on it I tried, I tried to uninstall, but I get an error message saying be used. How can I close it if I don't know where it is used? I want it off my computer.

  Hello again KrisWY,

  After a little more research, if the system restore does not want to follow the instructions on this Web site: http://www.pccleanup.net/malware-protection/how-to-remove-bearshare-from-your-computer

  Please note that a lot of work is involved to remove bearshare; This includes editing the windows registry.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com