Error-Server cannot be found

Similar Questions

• Error - Server cannot be found. Can't connect to WIFI in Windows XP machine.

  Original title: I can't connect to wifi using my laptop. I can log on when perfectly well using the ethernet adapter and my cable modem.

  I can't connect on wifi with my laptop. "Wireless network connection" reads "connected." Power supply: 'excellent '. When I try to connect to internet, I get the message "Cannot find server" as if there is a problem with my IP address. I can connect to the internet perfectly well when you use the with my cable modem ethernet adapter. Any ideas?

  Hi cmptrken,

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.

  Please post back and we do know.

• This page appears broken. DNS error - server cannot be found.

  I use Firefox 3.6.9 so is my husband. When I go on many sites, I get this error message AFTER it displays the page for about 10 seconds. My husband can go on the site and it remains standing. We checked my setting against her, cleared the cache and history repeatedly and undermines the fact still. I use win7 64 bit and Firefox3.6.9. Please help me to get this problem is resolved or I'll have to go back to IE which I do not completely, but I can see the same web pages and it does not turn off.

  Farhad

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• DNS server cannot be found

  Whenever I try to use my WiFi at home one I get an error code saying that my DNS server cannot be found. And I basically all done to try to get him to stop. He also says that I have limited to WiFi connection. I am so sick of this and I need to be able to use my laptop for school.

  Hello

  1 have. what troubleshooting measures you tried?
  2 are you getting this error message when you try cable?

  Method 1.
  1 connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  2. make sure that you are in Setup-> basic configuration category.
  3. scroll down until you see "DHCP Server" - if it is disabled, select 'enable '.
  4 enable DHCP if you want, you can change the number that starts the DHCP IP setting. (This is optional)
  5. use the DNS servers provided by your ISP. There are many DNS servers out there. It is preferable to use your ISP if possible.
  6. scroll and click 'Save Settings'.

  Method 2.
  1. press Windows + R and type Control Panel in the Run dialog box.
  2. go to network and sharing Center and then click on change adapter settings.
  3. right click on the connection to the Local network and select Properties.
  4. Select Internet Protocol Version 6, and then click Properties.
  5. select Obtain DNS server automatically an address and press Ok.
  6. choose obtain an IP address automatically.
  7. repeat the steps for Internet Protocol version 4 as well.

  Also check out the link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-GB/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  I hope this helps. If you have any other queries/issues related to windows, write us and we will be happy to help you further.

• the last 2 days I can't send / receive email. error message cannot be found to verify it, error #ox800cccod

  For the last 2 days I cannot either send or received by e-mail.   Error message account cannot be found.  Code #ox800cccod. That's happened?  How to fix?

  • What email program are you using?
  • Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• Is impossible to activate Windows 7 error "server cannot validate it.

  Original title: cannot activate Windows 7.

  I got this copy of Windows for a while and just recently built a new computer. I got this copy on other computers until either dead or I no longer use. (a laptop computer is still usable, but I doubt that I ever will be again once, just bought a new laptop with win8 installed...)

  When I entered the activation now, he says the

  Reading these threads, I noticed that many threads mentions a copy of Windows by computer - but I have 2 computers with the same copy of windows 7 on it. My understanding is that a copy of windows is associated with a single person, not every computer that person has, as long as its for personal and non-commercial use.

  I don't remember exactly where I got this idea, it may have been the person who built the first time, my office about 4 years ago, but nevertheless I've always had a desktop and a laptop with the same copy of windows inside. I also experienced a few computers since I no longer use, but I still installed the same copy on the computer replacement without any problem.

  What should I do? I have to buy a new copy of Windows? Or should I report somehow old computers that had the copy in it but is now trash?

  Hello

  Operating system Windows licenses: license = one Installation.

  ________________________________

  And this rule also applies:

  If the computer/laptop comes with the preinstalled Windows operating system (Dell, HP, Acer, etc.), or OEM System Builders license, this product key provided with your computer/laptop to the OEM license preinstalled and is not transferable.

  The OEM license/product key (systems of operating pre-installed on Dell, HP, etc. machines and OEM System Builders license) is related to the first machine it is installed on and dies when dies of this machine.

  Only retail Operating System license that you buy and install yourself, are allowed to be transferred to another machine.

  And retail licenses also can be installed on a machine at one time.

  _______________________________

  If it is a retail license and transfer it to you and it is installed on a machine, you may need to follow these steps.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  See you soon.

• Error "Update server is not found" when checking for updates

  I'm using VMware Workstation 8.0.5.

  I also had the following problem with 8.0.4 but NOT with 8.0.3: when you try to check the updates, I constantly get an error message:

  'The update server is not found. Check your Internet settings or contact your system administrator.

  There is nothing wrong with my Internet settings. I tried to paste the URL of the update server, i.e.

  https://softwareupdate.VMware.com/CDs

  in Internet Explorer and it appears a page. However all links on the page return an error "page cannot be found '...

  Please notify.

  Kind regards

  M.R.

  As in the image below show 8.0.5 is not yet on the server to update the software! (I even if I told you that in the thread in the release notes.)

  http://softwareupdate.VMware.com/CDs/VMW-desktop/WS/8.0.5/ does not yet exist.

  

• ITL file cannot be found or created

  When I try to open iTunes I get error, "itl cannot be found or the folder created.  I tried uninstalling iTunes and reinstalling, but it still doesn't work.  Is there any solution for this?

  Hi, Dwether.

  Please visit Apple support communities.

  I understand that you receive an error when you try to open iTunes.  While the article below is not labeled for your specific question, I recommend you have completed these steps still apply.

  If you do not see your content once you update iTunes

  See you soon

• SSL VPN Tunnel mode, "page cannot be found" - Urgent!

  Hi experts,

  I am trying to configure a tunnel mode SSL VPN (the one who downloads the client to your PC to give full access to the network) and the urgent need of your help, sorry for the emergency, but my client needs this as soon as possible and my wife due our second baby from last Monday so time is of the essence

  I get an invalid certificate Internet explore when I navigate to http://publicip/remote, which is very well that it is a self cert signed, but when I click on 'continue' I get an error "page cannot be found".

  Did I miss something in the config or if I'm away from Flash (web files) files?

  I have attached the config but also a worm and dir flash sh.

  I ran the SDM to configure and as such he has inserted an ACL of the IP allowed the host publicip, I don't like this good and want to remove it, can advise you?

  Thank you very much

  Dave

  Hello

  Try to change this command in your context:

  Gateway gateway_1 domain domain.com

  TO

  Gateway gateway_1

  'domain' indicated that here is not real estate, but a part after the URL.  With the configuration you have, you will need to connect to the following url for a Web page:

  https://publicip/domain.com

  Which is probably why you get an error when you simply browse to https://publicip

  -Jason

• When I try to open my email on my new desktop, an error window tells me my host server POP3 cannot be found.

  My laptop receives by e-mail very well. Windows confiures my wireless network settings. Problem: when I try to open my email on my new desktop PC , an error window tells me my host server POP3 cannot be found. I have tried everything; network connections, Internet options; etc. I get connection otherwise for the internet Google, Facebook, online banking, but not to my email. I entered my full POP and SMTP addresses, but they are lost for my internet connection LAN, which is automatically set to be managed by Intel. I tried to reconfigure it and tried to find Windows wireless network settings. On my laptop if I lose the connection he asks me if I want Windows to manage my connection. And it does!  Help! I really want to be able to find the network Windows wireless.

  original title: NETWORK WITHOUT WIRE WINDOWS

  Hello

  If you use the internet OK for other things, the problem with Outlook Express (e-mail client).

  Check your server settings and out against your ISP help pages. I've seen cox help pages that involve your incoming server should be pop.east.cox.net (note the absence of the number 3 after pop). The outgoing server may be smtp.cox.net or maybe smtp.east.cox.net.

  Tricky

• EasyStartup 3.8.1c fails to load on TS140: error fatal server: no screens found

  I just got a TS140 (70 has 4-000HUX). After unpacking, I installed 4 x 2 TB SATA HDs, attached to my external USB DVD drive, set the BIOS to boot first from the DVD drive and inserted the DVD EasyStartup supplied with the system.

  The program starts very well and then falls back to the command prompt of the Red Hat with the following message:

  (EE) VESA (0): address V_BIOS 0xd00 out of range

  (EE) Or screens are, but none has a usable configuration

  Fatal server error:

  no screens found

  I tried to change the setting of the built-in VGA in the BIOS, but (obviously, since I'm writing this) no joy.

  Not that I necessarily need this program to configure the server. But I'd like to see what he can do.

  I also don't see the opportunity to press Ctrl-I to enter the Intel Rapid Storage Technology BIOS utility, even if I set the type of SATA RAID controller in the BIOS.

  And it is not clear to me is simply that the password of manageability Intel by default even if I can get to the login prompt.

  Any help is greatly appreciated.

  And...

  I thought about it.

  Apparently, it is not a good idea to change the startup parameter in UEFI only. Cannot use EasyStartup or the Intel RAID BIOS in this mode.

  I still need to figure out if the Intel management interface. I have reset it and apparently the old and password is "admin" but it will not accept a new password.

• Error: "the song___ couldn't be used because the original file cannot be found. You want to locate"with Itunes

  Original title: songs from ITunes library will not play.

  Many of the songs in my ITunes library opening result in the following message: "the song___ could not serve because the original file cannot be found. You want to locate. "When I click on 'Search', none of the files are recognizable and yet does not play the song at the opening.

  I know that this isn't a matter of Windows, but some of us are always based on Apple for our music.

  Hi Allan_889,
   
  Here is an article of Apple Support that you may find useful. Follow the steps in the article and see if you can solve this problem.
  iTunes: file not found error message
   
  Note: The steps described in the article may apply to find the files of the song as well.
   
  If it doesn't, please post your request in The Forums of Apple Support for assistance.

• NET USE error: '67 system error has occurred. The network name cannot be found. »

  Original title: NET USE worked for error.

  OK I used the following with a RDP'ing of XP in a server of S2k3 years:

  NET use lpt2 \\SERVERNAME\printername /persiternt:yes

  now, I get a "system error 67has has occurred. The network name cannot be found. »

  What made me state was I restarted my XP machine.

  What I've done since then rebooted the box of the network, hubs, Wireless DSL modem router and the win 2 k 3 boxes with the same results...

  suggestions?

  Hey cvs334, would you unplug the ethernet cable from all these devices ' network box, hubs, Wireless DSL modem router and the win 2 k 3 boxes "then unplug the power cord for each. Then after about 60 seconds, connect waiting for DSL modem for sink power cord. Then plug the router after sink connect the router to the modem, and then connect the hub and other devices. This allows the automatic redirection Web DNS router to the modem. The router may be failing or the router LAN port may be faulty.

• Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

  Hi all

  I have created a native extension in the BB SDK 10.2 to connect to data services and request a server using the CellualarDataInterface API.

  It was packed, but when I run it in Simulator or device, it shows error:

  Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

   

  I read that it is the link error but not able to identify the problem.

  Here's the URL where my BB 10 code example is hosted:

  http://www.filedropper.com/SampleApp (Go to this link and click Download this file)

  Please help me find the solution. It is very urgent.

  Finally, I solved this error by adding the network of Qt library.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.