Error ' shellexecuteex failed: code 2 "during the installation of the Disciples III on Windows 7

Similar Questions

• error: ShellExecuteEx failed: Code 5 access denied trying to uninstall a 3rd party program.

  I was using a 3rd party appointed Start Menu Pro 7.8 program & wanted to uninstall, I use CCleaner for the same purpose, but when I tried to uninstall the program I got an error: ShellExecuteEx failed: Code 5 access denied. I've never had this error before, so was not sure of the cause of it... so I would like to know the reason for the error.

  Thank you

  Run the program with admin rights:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Code 5 - access denied means that you don't have permissions to run the programs with rights of sweat standard.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• ShellExecuteEx failed; Code 203

  I searched around a field for this and I'm not sure what to do,
  whenever I try to download anything it continues to show this:
  Error
  ShellExecuteEx failed; Code 203.
  The system could not find the environment option that was entered.

  I don't know what this means, and I delete some files on this computer about a month and half ago. but I really didn't know what I was doing
  I'm not very good at computers and I don't have any CD or anything with me because I had this awhile ago.
  It is a windows vista
  and a computer laptop advent.
  Please help ASAP!
  Thank you, Mary.

  Delete "some files" probably wasn't a good idea. Given that we have no idea of what you were doing (except that you shouldn't have removed "from the files'), all I can say is that fix you your computer. Back up your data first.

  First run the System File Checker. Start > Search > type: cmd
  When cmd appears above, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt, and a command prompt opens. At the prompt, type: sfc/scannow [press Enter] [System File Checker will work]

  If the System File Checker does not help, try a repair. Advent may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get there by repeatedly pressing the F8 key as the computer starts.  Or you can do a repair file Vista bootable DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need the third-party burning software such as Nero, Roxio or the free ImgBurn (www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  Repair Windows Vista by using the Startup Repair -http://www.bleepingcomputer.com/tutorials/tutorial148.html

  If the repair doesn't work, restore your computer as long as you plant any ADVENT method provided. If you don't know how, contact technical support ADVENT.

  MS - MVP - Elephant Boy computers - don't panic!

• Error-cannot run the file: iexplore.exe. ShellExecuteEx failed; code 2.

  Hello, my pc is very slow, and then restored the system.
  And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:

  Cannot run the file: iexplore.exe
  ShellExecuteEx failed; code 2.
  The system cannot find the specified file.

  I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.

  Or find me in my computer the "iexplorer.exe".

  A friend told me that there is an error in the "System32" folder But I haven't changed it.

  What is this error? Can I format the computer?

  PS: I do not speak or write English very well. Sorry for mistakes in the text.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Check to see if you can launch Internet Explorer

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• I get an error code 205 during the installation

  I get the error code 205 during the installation?

  N ° 1)

  Click on the link below and open Photoshop Elements download link.

  Do not close the page, just keep it open.

  Download Photoshop Elements products | 10, 11, 12, 13

  Then click on the link below and download the installer directly mentioned in step 2.

  He's going to start directly from the installation process.
  

  Step 2)

  For Windows : http://trials2.adobe.com/AdobeProducts/KCCC/1/win32/ACCCx3_1_0_108.zip

  For Mac : http://trials2.adobe.com/AdobeProducts/KCCC/1/osx10/ACCCx3_1_0_108.dmg

  If you get an error message like "Download seems to be corruptd (-60)" during the installation of the CC apps in the applications menu,

  For now download by in below link:

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Reference:

  Error download or update Adobe Creative Cloud applications

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• error code 1606 during the uninstallation of autocad and sewer storm

  error code 1606 during the uninstallation of autocad and sewer storm

  Hello

  I suggest you disable any autodesk / autocad related items from msconfig and see if that gets rid of the message.

  Click Start, type msconfig.

  To after the results, click on msconfig and click on the Services tab.

  I hope that helps!

• How can getting error Code U44M1P7 during the upgrade, I fix?

  How can getting error Code U44M1P7 during the upgrade, I fix?

  Update product that you are trying to install?

  Is it compared to the creative or perpetual clouds?

  Please check following if you have creative clouds.

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-updates-CCM.html

• I'm getting follwing error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  I'm getting follwing error when I try to open the computer management in windows 7, the error is as follows.

  The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

  Where can I find this dll file and help me to download and install.

  MSVCR100. DLL is part of C++ 2010.  You need to reinstall that.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84&displaylang=en

• error code 643 during the installation of security update

  I have just run into the same problem!

  Todays Nov 25/09 windows automatic update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688).
  Installation status: failed
  Error details: Code 643
  Update type: Important

  Processor Core 7 920 Windows 7 standard upgrade to Vista Ultimate.
  Ouch again. That's the second problem with W7. Wasen can't able to install Flight Sim in windows7 says component MSXML 4.0 SP2 is not installed, please reinstall Flight sim to restore or repair, does that twice, but it does not work. This failure of XML Core Services could be linked to the MCXML 4.o problem?

  I followed all the commits that I can find, but not of specific solutions.

  I'm having the same problem (Vista). I can't find a solution validated for the error code 643 for the fix described.  I keep being told that the installation has failed.

  RandomMann,
  If you are still having this problem then take a look at this thread because it covers this error.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 34 during the installation of a program

  Original title: error code

  error code # 34 what while trying to install a program & how to fix that?

  Hello

  Thanks for the reply.

  As you get this error during the installation of the family search indexing, I suggest you to contact them with this link and check.

  https://indexing.FamilySearch.org/support/support.JSF

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• error code 80040006 during the installation of windows live essentials on windows 7.

  I have a new computer and I'm trying to get everything to work right. We manage the reception of windows 7 pro 64-bit. I am trying to download the updates, and they are all worked well until I got to the windows live essentials. they all fail repeatedly. Get the codes as 8004006. Why does he refuse to install?

  Well, it was worth it. Now let's see...

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: «0 x 80242006»
  http://support.Microsoft.com/kb/956707

  Tip: Use the Vista-specific resolution.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an error code 1935 during the installation of Companionlink software. How can I get this problem?

  The bed error message the following OS:

  Error 1935. An erroe has occurred during the installation of Assembly jacks.  {98CB24AD-52FB-DB5F-AO1F-C8B3B9A1E18E}.
  HRESULT: 0 X 80070424

  The machine is a device of Vista with 64-bit processor.

  Hello roninaz2,

  Thanks for posting on the Microsoft answers Forum.

  They are not on the list of the Windows Vista Compatibility Center. But since I'm not sure what you're trying to sync, I would suggest that you contact Companionlink.  They have software for different products and installation guides. Click here for a link to Companionlink support.

  Thank you, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think