Error stack N2048P
I have 2 stacked N2048P switches. Shortly after the deployment, I started to have constantly the errors below:
DRIVER 172.x.1.x - 2 [108576100]: broad_hpc_drv.c (4362) 8073 %% unit: 0
CDC RX FIFO error table entry 0 39 ECC
DRIVER 172.x.1.x - 2 [108576100]: broad_hpc_drv.c (4362) 8121 %% unit: 0
CDC RX FIFO entry error 37 double-bit ECC
Here are the nine switches configured by Dell. I'm not familiar enough with the operating system to solve problems. Everyone knows this? If so, how to solve it?
Hi chanjohn01,
The error is a memory error. You can try to update or Flash the image and see if that helps. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=Y7V3N&FILEID=3376784553&osCode=NAA&ProductCode=networking-N2000-Series&LanguageCode=en&CategoryID=NI
If this does not resolve the problem, try unstacking and ensuring that it is just the first member of battery that is giving the issue, the error refers to unit 0.
Tags: Dell Switches
Similar Questions
-
? Error: stacks overflow running an old back program
I'm trying to run an old DOS program in Vista and XP and get this error message:
? Error: stack overflowError code 2000PC = A748: 0006; SS = 4 CA 1, FP = 0006, SP IS A734The program used to work fine a few months ago, but now nothing.I tried adding "STACKS = 64, 512' config.nt and which did not help."Can someone help me make it work?Thank youIf the program is not compatible, then you try to install and run the program in compatibility mode.
Use the following steps:
(1) right click on the program
2) click Properties
3) click on the Compatibility tab
(4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.Check out the link here: make sure to run older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.
If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.
For a program of oldest back, I saw DosBox recommended by others. I think it's a free program. You may need to do some research.
Thank you
Marilyn
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
You don't say what program happens in: Internet Explorer, etc.
Stacks are reserved memory that programs use to treat the material events. A stack overflow occurs when there is not enough space in memory to run the hardware interrupt routines.
When Windows gives an error message that is related to an internal stack overflow, there is not enough space in memory either set aside, to be available to handle calls that are made to the hardware.
See you soon.
Mick Murphy - Microsoft partner
-
I have a flow of stubborn task that I throw like a line-popup dialog box. There are buttons with an action listener. When I use AdfFacesContext.getCurrentInstance () .returnFromDialog (returnValue, null) at the end of the code in the event the message I get is
ADFC 12001: The ADF controller pop tent last entry of error in page flow scope stack.
The error is displayed in the debug window, but does not stop the application or display the message in the application.
I use JDev 11.1.1.7
Everything seems to work, why so this error occurring?
I've seen this error, but no clear answer-related positions.
Hello
seems that the workflow is trying to clean up but there is nothing to clean up. I can't find any entry in the database of bugs, but think it's because the workflow in fact - if present in a dialog online - is not stacked.
Frank
-
Failed to start the service of bluetooth - BTTRAY ERROR stack
BTTRAY ERROR: since I bought microsoft bluetooth notebook mouse 5000 I get this error whenever I start up my computer - anyone able to help - I'm on win 7 64 bit pro - very frustrating - I don't know yet if there is a microsoft driver problem!
I suffered from the same problem. Yesterday, I found this site. I downloaded the software. I think it works. Try it and let me know!
http://www.Broadcom.com/support/Bluetooth/update.php
GL
-
Problem with display of reports in 3.1 beta, error stack trace
I get this error when I try to run a report, any ideas what could be the problem?
org.hyperic.hq.common.SystemException: java.text.ParseException: date of: "21 August 2007, at com.hyperic.hq.ui.action.reporting.ReportingAction.getReportParametersFromJSON(ReportingAction.java:211) at com.hyperic.hq.ui.action.reporting.ReportingAction.execute(ReportingAction.java:88) at org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter) ApplicationFilterChain.java:252) to org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) to org.hyperic.hq.ui.AuthenticationFilter.doFilter(AuthenticationFilter.java:110) to org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) to org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) to org.hyperic.hibernate.filter.SessionFilter$ 1.run(SessionFilter.java:59) at org.hyperic.hq.hibernate.SessionManager.runInSessionInternal(SessionManager.java:79) at org.hyperic.hq.hibernate.SessionManager.runInSession(SessionManager.java:68) at org.hyperic.hibernate.filter.SessionFilter.doFilter(SessionFilter.java:57) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.java: 202) to org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.hyperic.hq.product.servlet.filter.JMXFilter.doFilter(JMXFilter.java:324) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke (StandardContextValve.java:178)) to org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39) at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856) at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.processConnection (Http11Protocol.java:744) to org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527) to org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112) at java.lang.Thread.run (unknown Source) caused by: java.text.ParseException: date of: "21 August 2007, at java.text.DateFormat.parse (unknown Source) at com.hyperic.hq.ui.action.reporting.ReportingAction.getReportParametersFromJSON(ReportingAction.java:184).... 38 more java.text.ParseException: date of: "21 August 2007, at java.text.DateFormat.parse (unknown Source) at com.hyperic.hq.ui.action.reporting.ReportingAction.getReportParametersFromJSON(ReportingAction.java:184) at com.hyperic.hq.ui.action.reporting.ReportingAction.execute(ReportingAction.java:88) at org.hyperic.hq.ui.action.BaseRequestProcessor.processActionPerform(BaseRequestProcessor.java:63) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236) at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196) at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter) ApplicationFilterChain.java:252) to org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) to org.hyperic.hq.ui.AuthenticationFilter.doFilter(AuthenticationFilter.java:110) to org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) to org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) to org.hyperic.hibernate.filter.SessionFilter$ 1.run(SessionFilter.java:59) to org.hyperic.hq.hibernate.SessionManager.runInSessionInternal(SessionManager.java:79) to org.hyperic.hq.hibernate.SessionManager.runInSession(SessionManager.java:68) to org.hyperic.hibernate.filter.SessionFilter.doFilter(SessionFilter.java:57) to org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) to (org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:81) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.hyperic.hq.product.servlet.filter.JMXFilter.doFilter(JMXFilter.java:324) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke) StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178) at org.jboss.web.tomcat.security.CustomPrincipalValve.invoke(CustomPrincipalValve.java:39) to org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:159) to org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:59) to org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126) to org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105) to org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107) to org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148) to org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:856) to org. Apache.Coyote.http11.Http11Protocol$ Http11ConnectionHandler.processConnection (Http11Protocol.Java:744) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527) at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112) at java.lang.Thread.run (unknown Source)The problem is the analysis of this date with a local non-American. This is a bug and will be fixed for the next beta version of EE.
Thanks for the report,
-Ryan -
Hello
I am writing a widget app works almost every time, but sometimes, he throws a ControlledAccessException, I get the message of my bt try-catch block, I'm not able to get the exception stack trace, it's the structure of the code that I use:
Try
{
code.that.Crash ();
}
catch (e)
{
Alert (e); Watch ControlledAccessException error, without more details
Alert (e.message); It shows "undefined".
Alert (e.Stack); It shows "undefined".
}
Thus,.
How can I get the error stack trace?
As I know there isn't a way to inspect the stack trace in JavaScript itself.
-
3750 x how many switches can be stacked power
Hello
I have problem with my power on my X 3750 switch stack.
Error: Stacking of power does not work properly & here is the error I get. Please let me know how may switches support to be able to overlay.
detail of battery power #sh
Power battery battery battery Total Rsvd Alloc unused Num Num
The Mode name topology Pwr (W) (W) Pwr Pwr (W) (W) Pwr SW PS
-------------------- ------ ------- ------ ------ ------ ------ --- ---
Ring PowerStack-3 SP - 2800 1908 892 0 4 8 ch
Stndaln PowerStack-4 SP - PS 700 477 223 0 1 2Name of battery power: Powerstack-3
Stacking mode: power-sharing
Battery topology: Ring
Switch 1:
Power budget: 223
Allocated power: 223
Low-value priority port: 22
The priority value high port: 13
Change the priority value: 4
Port 1 status: connected
2 port State: connected
Neighbor on port 1: 5 Switch - acf2.c5db.2a80
Neighbor on port 2: switch 2 - 885a.922c.ce80Switch 2:
Power budget: 223
Allocated power: 223
Low port priority value: 20
The priority value high port: 11
Change the priority value: 2
Port 1 status: connected
2 port State: connected
Neighbor on port 1: switch 1 - b0fa.eb82.1880
Neighbor on port 2: 3 switch - 30f7.0d43.7d00Switch 5:
Power budget: 223
Allocated power: 223
Low-value priority port: 21
The priority value high port: 20
Change the priority value: 3
1 table of port: Shut
2 port State: connected
Neighbor on port 1: 0000.0000.0000
Neighbor on port 2: switch 1 - b0fa.eb82.1880Switch 3:
Power budget: 223
Allocated power: 223
Low port priority value: 19
The priority value high port: 10
Change the priority value: 1
Port 1 status: connected
State of the port 2: close
Neighbor on port 1: switch 2 - 885a.922c.ce80
Neighbor on port 2: 0000.0000.0000Name of battery power: Powerstack-4
Stacking mode: power-sharing
Topology of the battery: autonomous
Switch 4:
Power budget: 223
Allocated power: 223
Low-value priority port: 22
The priority value high port: 13
Change the priority value: 4
Port 1 status: not connected
2 port State: not connected
Neighbor on port 1: 0000.0000.0000
Neighbor on port 2: 0000.0000.0000#sh worm
Cisco IOS software, software of C3750E (C3750E-UNIVERSALK9-M), Version 15.0 (2) SE8, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Updated Thursday 13 May 15 22:53 by prod_rel_teamROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M), Version 12.2 (53r) SE2, RELEASE SOFTWARE (fc1)The availability of DOP-MYS-DR-STACK-A is 4 weeks, 4 days, 18 hours, 38 minutes
System to regain the power ROM
System restarted at 18:43:14 IST Wed Sep 30 2015
System image file is "flash: c3750e-universalk9 - mz.150 - 2.SE8.bin.This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.htmlIf you need assistance please contact us by mail at
[email protected] / * /.License level: ipbase
License type: Permanent
Then reload license level: ipbaseprocessor of WS-C3750X-48 (PowerPC405) Cisco (revision A0) with 262144 K bytes of memory.
Card processor ID FDO1702H1H2
Last reset of tension
3 virtual Ethernet interfaces
1 interface FastEthernet
260 gigabit Ethernet interfaces
10 ten interfaces Ethernet Gigabit
Password recovery mechanism is activated.512K bytes of memory simulated by flash not volatile configuration.
Basic Ethernet MAC address: B0:FA:EB:82:18:80
Number of the motherboard: 12552-73-08
Motherboard serial number: FDO17021Z17
Revision number of the model: A0
Motherboard revision number: A0
Model number: WS-C3750X-48 t-S
Daughter numbered card: 800-32727-03
Daughterboard serial number: FDO17021U80
System serial number: FDO1702H1H2
Top Assembly part number: 800-31326-07
Top of page revision number of the Assembly: B0
ID version: V04
CLEI Code number: COMJT00ARD
Material Board revision number: 0x04SW Version SW Image model switch ports
------ ----- ----- ---------- ----------
* 1 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
2 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
3 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-M
4 SE8 WS-C3750X-48 15.0 (2) 54 C3750E-UNIVERSALK9-M
5 54 SE8 WS-C3750X-48 15.0 (2) C3750E-UNIVERSALK9-MSwitch 02
---------
Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
Basic Ethernet MAC address: 88:5 A: 92:2 C: CE:80
Number of the motherboard: 73-12552-11
Motherboard serial number: FDO1737008G
Revision number of the model: A0
Motherboard revision number: A0
Model number: WS-C3750X-48 t-S
System serial number: FDO1737R034
Top of page Assembly part number: 800-31326-09
Top of page revision number of the Assembly: A0
Version ID: V06
CLEI Code number: 466496
License level: ipbase
License type: Permanent
Next time you restart level license: ipbaseSwitch 03
---------
Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
Basic Ethernet MAC address: 30:F7:0 D: 43:7 D: 00
Number of the motherboard: 73-12552-06
Motherboard serial number: FDO1627085Z
Revision number of the model: A0
Motherboard revision number: A0
Model number: WS-C3750X-48 t-S
Daughter numbered card: 800-32727-03
Daughterboard serial number: FDO16511JJ6
System serial number: FDO1627Z1J5
Top of page Assembly part number: 800-31326-03
Top of page revision number of the Assembly: B0
Version ID: V03
CLEI Code number: COMJT00ARC
License level: ipbase
License type: Permanent
Next time you restart level license: ipbaseSwitch 04
---------
Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
Basic Ethernet MAC address: 6 c: 20:56:C6:BC:00
Number of the motherboard: 73-12552-06
Motherboard serial number: FDO16371BCZ
Revision number of the model: A0
Motherboard revision number: A0
Model number: WS-C3750X-48 t-S
Daughter numbered card: 800-32727-03
Daughterboard serial number: FDO170105GN
System serial number: FDO1637P2CK
Top of page Assembly part number: 800-31326-03
Top of page revision number of the Assembly: B0
Version ID: V03
CLEI Code number: COMJT00ARC
License level: ipbase
License type: Permanent
Next time you restart level license: ipbaseSwitch 05
---------
Switch availability: 4 weeks, 4 days, 18 hours, 37 minutes
Basic Ethernet MAC address: AC:F2:C5:DB:2 A: 80
Number of the motherboard: 12552-73-08
Motherboard serial number: FDO16432HHP
Revision number of the model: A0
Motherboard revision number: A0
Model number: WS-C3750X-48 t-S
Daughter numbered card: 800-32727-03
Daughterboard serial number: FDO17021U2V
System serial number: FDO1644R0L5
Top of page Assembly part number: 800-31326-07
Top of page revision number of the Assembly: B0
ID version: V04
CLEI Code number: COMJT00ARD
License level: ipbase
License type: Permanent
Next time you restart level license: ipbaseConfiguration register is 0xF
DOP-MYS-DR-STACK-A #.
If you have more than 4, then divide into 2 batteries for power purposes; You can stack yet all 5 or 6 for network management purposes.
-
Error in BPEL 2.0 ORABPEL-05215
Hi all
I'm developing a simple BPEL process with JDev 12.1.3.0.0 and when compiling, I don't have any errors. When you deploy I ORABPEL-05215 error. The error description does not say much.
I search for other posts with this error and it is not a clear solution, it seems. I have checked the version of the suite soa and is the same that jdev (12.1.3) - I use Oracle pre-built VM for oracle soa suite 12 c (with oracle linux).
Details of the journal are:
[ERROR] Cannot run com.oracle.soa.plugin:oracle goal-soa - plugin:12.1.3 - 0-0: deploy (deploy by default) on the ProcessSelect project: - > response code = 500, error: there was a deployment of the composite on AdminServer error: deployment failed: error occurred during deployment of the component: ProcessSelect to service engine: implementation.bpel, for composites: ProcessSelect: ORABPEL-05215
[ERROR]
[ERROR] Error loading process.
[ERROR] The field of process meets the following errors when loading the process "ProcessSelect" (composite "default/ProcessSelect!1.0-SNAPSHOT*soa_3053171e-2300-4d0c-845b-a4f47d3bb117"): Validation of BPEL2.0 process failed...
[ERROR] This error was an exception thrown by the underlying process charger module.
[ERROR] Check the trace for the exception in the log (the connection value level debug mode). If there is a patch installed on the server, verify that the ownership of the bpelcClasspath domain includes the classes of patch.
[ERROR].
[ERROR]-> [help 1]
[ERROR]
[ERROR] To see the full error stack trace, re - run Maven with the switch - e.
[ERROR] Re-run Maven using the X switch to enable logging of full debugging.
[ERROR]
[ERROR] For more information about errors and possible solutions, please read the following articles:
[ERROR] [help 1] http://cwiki.Apache.org/Confluence/display/Maven/MojoExecutionException
Process has finished with exit code 1.
Thanks for your help!
Concerning
Hello Krishna,
I tried to deploy it on JDev Integrated server, but the error continued. I inscreased the logging of finest oracle.adf.share.ADFContext have more details about the deployment he self.
AFTE searcing the deployment log, I found that the deployment was looking for the patterns on the MDS and could not find. I'm not using MDS directly, but I'm making reference to a diagram of another project within the same application. This is probably why the mds has been used for. I moved this scheme for the same project and the deployment worked without problems. I'm going to deploy on the other weblogic server to ensure that everything is ok.
Again, thank you very much for your help!
Kind regards
Antonio
-
Error SMTP sending reports by e-mail - not you usual ACL question
Apex 4.2.5.00.08
Data services Oracle REST 2.0.9
Recently, we changed our architecture around a bit of the APEX. Previously we used the Oracle HTTP server on the same host as the database. Now we pass the 'web' part of the APEX to another server using ADR with Apache TomCat. Under the old configuration, we have been able to send emails without any problem. However, when we try to do under the new configuration, we get the following SMTP error stack:
ORA-29279: SMTP permanent error: 503 #5.3.3 AUTH is not available
I would have thought that email would still go database server in the new configuration but, perhaps, it's fake.
1 ACL have been created
Start
() mailserver_acl
"mailserver_acl.xml,"
"ACL for mail server used to connect,"
"APEX_040200,"
TRUE,
'connect',
"MAILHOST",.
(null);
end;
/
TURN ON THE COMPUTER HOST, ACL
OF DBA_NETWORK_ACLS
WHERE ACL LIKE '% mailserver_acl.xml ';
HOST ACL mailhost / sys/ACLs/mailserver_acl. XML 2. I am able to send an email with success by Telnet to port 25 on * is * host and send emails directly from the command line interface.
3. I am able to send successfully from the database using the PL/SQL interface.
Any ideas?
Thank you
-Joe
When configure you the new application server, you MUST have reconfigured APEX, correct? So you can have the apex_mail settings not the same as the old installation.
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Hi gurus of the Oracle,.
I use the "Query" Salesforce adapter operation. It worked fine last week when I had a service to call SFDC API. But after I added a second invoke for the same query operation, I get this error.
Call service Salesforce adapter error - java.lang.IllegalStateException: encryption algorithm not initialized
Pls check below the doc for source Composite.xml and BPEL.
https://drive.Google.com/file/d/0B8E4JtTUuzitQ1lpUkVxNnV5UGM/edit?USP=sharing
It looks like an access problem, but I am able to call the SFDC API using SOAP UI. Help, please.
The soa stack error - diagnostic.log
--======================
[2014 07-09 T 17: 47:04.272 - 07:00] [soa_server22] [NOTIFICATION] [] [oracle.soa.adapter.cloud] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] resource found by Solver of location
[2014 07-09 T 17: 47:05.266 - 07:00] [soa_server22] [WARNING] [] [javax.xml.ws.Service] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] could not read the URL wsdlDocumentLocation WSDL definition: null
[2014 07-09 T 17: 47:05.718 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [userId: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [component name: SFDC] Salesforce Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] error sending bytes to socket: java.lang.IllegalStateException: Cipher uninitialized
[2014 07-09 T 17: 47:05.720 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] JCABinding = > Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] could not invoke operation "application" against the "sales force" due to: []
Error sending bytes: java.lang.IllegalStateException: encryption algorithm not initialized
]]
[2014 07-09 T 17: 47:05.722 - 07:00] [soa_server22] [NOTIFICATION] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [component name: SFDC] JCABinding = > Dell_Zuora_to_Oracle_Invoice_Iface:SFDC [SFDCPortType::query (parameters, parameters)] modify the logging at TRACE level: n to see the full error stack
[2014 07-09 T 17: 47:05.745 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.adapter] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: SFDC] JCABinding = > [by default/Dell_Zuora_to_Oracle_Invoice_Iface! 1.4 * soa_bee5ce9f-a39a-4023-b5a6-8c13cbcbf2ad.] SFDC]: query operation failed two-way query()
[2014 07-09 T 17: 47:05.748 - 07:00] [soa_server22] [ERROR] [] [oracle.soa.bpel.engine.ws] [tid: orabpel.invoke.pool - 4.thread - 9] [username: GOPAL_TARITLA] [ecid: c17d2d5e5766b07e:-65660a9c:14711d970c3:-8000-00000000000d3eba, 1:33309] [APP: soa-infra] [composite_instance_id: 50029] [component_instance_id: 50029] [composite_name: Dell_Zuora_to_Oracle_Invoice_Iface! 1.4] [Component_name: Dell_Zuora_to_Oracle_Invoice_Iface] had FabricInvocationException []
java.lang.IllegalStateException: encryption algorithm not initialized
Concerning
TV Gopal
OK guys, we found the solution. We had to update the files of PVE strategy on our SOA server Linux machine.
Thanks to Varun Guruvugari (Support Salesforce) who responded with below the answer on another forum:
--===========================
There are countless reasons for uninitialized encryption error, but I'm sure that this reason is because of SSL certificates and you saw the error above for good reasons that salesforce.com ensures the safety and security.You will be able to integrate successfully in this instance, by deploying the latest version of the files of Extension JCE (Java Cryptography) unlimited strength jurisdiction policy-6 for JDK1.6 on the server SOA in FMW. Here is a good article to allow strong encryption algorithms FMW:http://docs.oracle.com/cd/E19644-01/817-5447/sgencryp.html#wp15647
--===========================
Concerning
TV Gopal
-
Hi all
When I try to run a tutorial PAGE or entire application PG, my jdev not starts the application in IE (or any browser itself). Please view the below error stack trace and let me know what to do.
=========
[Departure OC4J uses the following ports: HTTP = 8988, RMI = 23891, JMS = 9227]
C:\jdevhome\jdev\system\oracle. J2EE.10.1.3.41.57\embedded-oc4j\config >
C:\jdevbin\jdk\bin\javaw.exe-hotspot - classpath C:\jdevbin\j2ee\home\oc4j.jar; C:\jdevbin\jdev\lib\jdev-OC4J-embedded.jar-DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = true - DRUN_FROM_JDEV = true - mx256m - XX: MaxPermSize = 256M - Xverify: none - DcheckForUpdates = adminClientOnly - Doracle.application.environment = development - Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 - Doc4j.jms.usePersistenceLockFiles = false oracle.oc4j.loader.boot.BootStrap - config C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Journal of com.evermind.server.jms.JMSMessages may 3, 2014 20:30:50
INFO: JMSServer []: Server OC4J JMS recovery of transactions (commit 0) (0 rollback) (prepared 0).
Journal of com.evermind.server.jms.JMSMessages may 3, 2014 20:30:50
INFO: JMSServer []: Server OC4J JMS recovering local transactions queue [jms/Oc4jJmsExceptionQueue].
WARNING: C:\jdevbin\jdev\appslibrt\xml.jar source Code (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /C:/jdevbin/lib/xml.jar (< source code > (ignore obvious Class-Path) in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.
WARNING: C:\jdevbin\jdev\appslibrt\jazn.jar source Code (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml) has the same filename, but is not identical to the /C:/jdevbin/j2ee/home/jazn.jar (< source code > in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.
WARNING: Source-Code C:\jdevbin\jdev\appslibrt\jazncore.jar (from manifesto of C:/jdevbin/jdev/appslibrt/jazn.jar) has the same filename, but is not identical to the /C:/jdevbin/j2ee/home/jazncore.jar (< source code > in META-INF/boot.xml to C:\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the default.root:0.0.0 charger.
WARNING: Source-Code C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from WEB-INF/lib/directory in C:\jdevhome\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same filename, but is not identical to /C:/jdevbin/jdev/appslibrt/uix2.jar (< draws > in C:/jdevhome/jdev/system/oracle.j2ee.10.1.3.41.57/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it will be hidden because it is already visible in the search path for the datatags.web.webapp:0.0.0 charger.
14/05/03 20:31:13 java.net.ConnectException: Connection timed out: connect
14/05/03 20:31:13 at java.net.PlainSocketImpl.socketConnect (Native Method)
14/05/03 20:31:13 at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
14/05/03 20:31:13 at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
14/05/03 20:31:13 at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
14/05/03 20:31:13-java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
14/05/03 20:31:13-java.net.Socket.connect(Socket.java:507)
14/05/03 20:31:13-java.net.Socket.connect(Socket.java:457)
14/05/03 20:31:13 at java.net.Socket. < init > (Socket.java:365)
14/05/03 20:31:13 at java.net.Socket. < init > (Socket.java:207)
14/05/03 20:31:13-oracle.jdevimpl.runner.oc4j.Oc4jNotifier.sendMessage(Oc4jNotifier.java:98)
14/05/03 20:31:13-oracle.jdevimpl.runner.oc4j.Oc4jNotifier.postInitApplicationServer(Oc4jNotifier.java:55)
14/05/03 20:31:13-com.evermind.server.ApplicationServer.serverExtensionPostInit(ApplicationServer.java:1202)
14/05/03 20:31:13-com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1049)
14/05/03 20:31:13-com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
14/05/03 20:31:13 at java.lang.Thread.run(Thread.java:595)
14/05/03 20:31:13 containers for J2EE 10 g (10.1.3.3.0) initialized Oracle
=========
His critics and pls help me with your thoughts. Thank you
Concerning
$oorya
-
validations, triggered exceptions and internationalized error messages
Hello world
I want to create an application in multiple languages.
I wrote the PL/SQL functions for operations of C (R) UD (that are called through the Apex) - but without validation. All the validation code is still in the GUI/APEX, because as Apex...
- gives me the opportunity to translate my error messages later
- allows me to assign a validation for an input field error
But is it possible to...
- put the validation in the PL/SQL functions?
- always be able to establish an error for an input field?
It would be good to have 1 exception for several columns, but then, Apex do not know in what field of entry error occurred, right?
But even if I have for example a NO_POSITIVE_NUMBER_IN_COLUMN_1 and a NO_POSITIVE_NUMBER_IN_COLUMN_2 exception, it would be possible for Apex display error messages without counting as the right input fields?
If so, how is that possible? I know there is a new function Apex 4.1 error handling option, but this means that the function needs to know that will be triggered every single exception?
And where the translation take place?
Thanks in advance,
Jules
Justin
Instead of trigger an error, use apex_error.add_error to add the validation error to the error stack.
With the help of the apex.add_error shows the messages as is they where of regular postings.
PROCEDURE insert_values(p_param1 ..., p_param2 ...) IS BEGIN IF p_param1 IS NULL THEN validation_failed := TRUE; apex_error.add_error( p_message=>'VALIDATION_NOT_NULL', p_display_location =>apex_error.c_inline_with_field_and_notif, p_page_item_name =>'P1_ITEM1_NAME' ); END IF; IF p_param2 IS NULL THEN validation_failed := TRUE; apex_error.add_error( p_message=>apex_lang.message(p_message=>'VALIDATION_NOT_NULL',p0=>'Label P2_ITEM_NAME'), p_display_location =>apex_error.c_inline_with_field_and_notif, p_page_item_name =>'P1_ITEM2_NAME') ); END IF; END;
In the literature, there is the following note:
This procedure must be called before the Application Express application has completed the last validation or process. Otherwise, the error is ignored if it does not display a location of
apex_error.c_on_error_page
.This means that you need to separate your actions of dml validation checks.
Note that I have show 2 different methods for translations in the example above.
For P1_ITEM1_NAME, the translation is done centralized in your handeling custom error function.
For P1_ITEM2_NAME, the translation is done directly with the validation.
Also note that postings not null is a bad example because they are defined by the parameters of page elements.
Nicolette
-
Creating custome error page? for sessions exceeded exception for an application
I have a question?
How to manage sessions maximum exceeded for application within the maximum limit of memory session once reached.
How to view a printable page of the user or the message instead of the error stack
as "" "" Error 500 - Internal Server Error
«"" weblogic.servlet.SessionCreationException: cannot create new sessions than the MaxInMemorySessions limit (100) has been exceeded»»»
Jdeveloper11.1.2.1.0, weblogic 10.3.6
Thank you
You can have a look at the following resources:
https://blogs.Oracle.com/jdevotnharvest/entry/extending_the_adf_controller_exception_handler
Exception handler for calls from method inside of the ADF task flows with Pages
https://blogs.Oracle.com/ADFProgrammers/entry/using_exception_handler_in_an
Antonis
-
Hi all
I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below
Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.
See the error of the stack for more details on the cause of this problem.
Time: 31/03/2015-14:40:05
Target: DBServer
vCenter Server: vcsa
Error stack
An error was received from the ESX host turning on DBServer VM.
Unable to start the virtual machine.
Power DevicePowerOn module has failed.
Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'
Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.
This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)
André
Maybe you are looking for
-
A Presario SR5310F has a MB with 2 sata connectors, 1 HD - DVD 1. How can I add a 2nd HD SATA without another connector on MB? PS, [email protected] is no longer active. I changed my email and should be now. Thank you
-
East-security Microsoft remote supply & Services network?
The international space agency is a scientific non-profit Corporation. We want to know if Microsoft offers remote professional security network and operating control. We have 5 computers on a small business network. Windows XP Home & Professional on
-
Can update new installation failure Win7, I transfer files from another pc to solve?
So I have 2 computers win7 home premium 64-bit, one is a desktop computer and another is a laptop. The old hard drive died for the laptop, so I bought a new ssd to replace. However, im from the difficulties of installation of windows update on the la
-
IOS anyconnect vpn group lock and user restrictions
Dear Experts, I now have two questions about cisco IOS vpn on ISR G2: 1 is it possible to lock user group in IOS anyconnect VPN we can do in ASA? If so, can someone share the steps for her? 2 - a customer wishes to restrict the anyconnect user login
-
Several programs invade my knees when try to install a. Uninstall a nightmare.
While trying to install an anti-virus program, all of a sudden I started having several programs on my laptop. I just kept closing the windows one by one but seems the programs like my hospitality and decide to stay. The original program that I tried