Error starting "" LOAD D:\WINDOWS\INTRASIPI. "» DLL.

Similar Questions

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.

  Original title: my first RUNDLL error.

  At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.

  It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please

  The 10 landfills, three were from 2009 so I don't check those out.  Four were on 8 June, two of 14 may, and one from May 17.

  Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3).  INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?).  The suggestion would be to update the driver, or off the device if you do not use.  Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.

  I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.

• As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

  Original title: Rundll error help

  As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error loading C:windows\mstapox.dll, when you start Windows XP

  Originsal title: error loading

  When starting, I get the following message: error loading C:windows\mstapox.dll

  Does anyone have a solution?

  There is no file with this name in XP.

  In addition, there very few dll that must be load in the c:\windows folder and is not one of them.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If that's really what you see, then your system is now or was hit by malware.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error loading C:\Windows\dddabb.dll start

  get this error at startup on my wife's PC: error loading C:\Windows\dddabb.dll.  Recently, I pulled from the closet and put it back together.  Charge of Norton on it and the updated definitions.  There was a Trojan horse on the computer on which the VA took over.  Could be the cause of the startup error? I'd appreciate any help.  Thank you.

  If the computer is connected to the Internet before anti-virus was installed (and it sounds like it could be the case), you can not believe that there is no malware deep somewhere in the system.  You must format the disk and do a clean install of Windows.

  Otherwise, here's my answer canned the type of error message you received:

  Looking for errors like this by doing a search on Google for the name of the file.  Usually, they turn up without success.

  When a search in no hits or suspicious hits result, the answer is usually that the file in question is linked to the malicious software and your anti-malware application has deleted or quarantined file, but left to the Windows registry entry that tries to start the malicious software when you start your computer.

  First of all, download, install, update and run full scans with two of these free analytical tools:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

  Do not run the scans at the same time.  They can take some time, so start an and then go for a non computer chore for awhile.

  If the scans does not solve the problem (and they can't, because the actual malware file has already been processed), then download and run Autoruns.  Click on the "Connection" tab and look in the column 'Image path' for the dll named in your error message.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."

  Once you find the line with the file in question, either "delete" or (if you want to be safer) uncheck the box.  The latter prevents the line running, but you can reactivate it later by removing the check mark.

• Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

  Whenever I start my computer, a message appears:

  "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

  Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
  If anyone can help with a solution to my computer problem?

  Hi Caspwilson,

  Not answering all calls for support!

  Download CCleaner from www.piriform.com/ccleaner and scan your system.

  I hope this helps.

• Start Windows XP error message: "error loading C:\WINDOWS\INODEN.dll".

  original title: Windows XP error message at startup

  When you start Windows XP, I get the error message

  "Error loading C:\WINDOWS\INODEN.dll

  The specified module could not be found "."

  How can I fix this to avoid dll error message that it appearing?

  the dll is likely because there is a start-up or a service that always calls for her but this dll is no longer on disk.

  You must understand, what parent program has this dll to the child.

  Locate the parent service and or start parent program via msconfig, then turn it off.

  as to why the dll could not be found - it might have been zapped by your anti viral or you have uninstalled a poorly written program and he left an entry of orhpaned inland startup Control Panel, for example msconfig.   (by the way, may have orphaned registry keys too.  but that's another issue)

  in any case, to review entries in msconfig, click on start > run > msconfig

  before changing the msconfig, first mark a restore that can help point to reverse all the mistakes you made by accident.

• rundll error loading c:\WINDOWS\pbl32rtU.dll start box

  Hello

  Can someone help me.  I started my netbook this morning and managed to catch the virus spcmdcom.sys.  Finally after I started my netbook in safe mode, I was able to run the latest malwarebytes and who seems to have got rid of however I none get a RUNDLL don't box start with the message error loading c:\WINDOWS\pbl32rtU.dll and I can not connect to all web pages - although I can connect to a Web page via Fillezilla I host - go figure.

  In any case please please please can someone give me advice on what I should do.

  I can't connect to the internet to run a registry fix :(

  Any help appreciated with gratitude

  Hello

  This is the result of malware then carry out a very thorough check and when the system
  is clean see the following message to remove these errors.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

  I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

  C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

  As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

  What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
  You could also disable the offending boot entry via msconfig > startup if it shows up there.

  Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
  04 entry in the log from hijackthis should look like the example below.

  "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

  O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

  http://free.antivirus.com/HijackThis/

• Error on startup: "Error loading C;\windows\apakahubozerahe.dll the specified module is not found."

  Whenever I start my PC, you receive this error message; "Error loading C;\windows\apakahubozerahe.dll the specified module is not found.   How can I get rid of this? I can't find the file in c: Windows to remove and my registry cleaner does not clean it?

  He does not seem to cause any trouble and disappears when OK is hit.

  Hi Kevin!
  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error loading C:\Windows\icodonokecikotad.dll

  On startup, I get a message window

  RUNDLL
  Error loading C:\Windows\icodonokecikotad.dll
  The specified module could not be found
  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Loading the dll error messages: error loading c:\windows\hkdpog.dll

  When I connect my computer in the morning, I get two error messages:

  Error loading c:\windows\hkdpog.dll

  Error loading cdbu.euo

  They both seem orphan entries left behind by an infestation malare. Autoruns to disable first them and then a day or so later to remove them.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.