Error: System Restore cannot create a restore point.

Similar Questions

• Vista Ultimate - cannot create a system - error 0x800423F Restore Point

  Trying to create a system restore point Volume will receive an 0x8004230F error.
  "The restore point could not be created for the following reason:
  The shadow copy provider had a unxepected error while trying to process the
  specified operation. (0x800423F)."

  The event log shows VSS errors with Event 12293 and 12305 Id.

  vssadmin List Writers shows no errors.
  vssadmin list providers only shows the snapshot 1.0 MS provider

  All the disks are NTFS and all show 'good situation '.

  Restarting does not help or solve the problem.

  The Volume Shadow Copy service is started. (Restart does not help)
  Microsoft Software Shadow Copy Provider service is started (restart does not help)

  CWH,

  By your inplace upgrade error, try this KB http://support.microsoft.com/default.aspx/kb/946078 . See if it does or that it does not that you do not your inplace upgrade. If you can still do an upgrade inplace or it does not solve your problem, again I think that your solution is resettlement. Shadow copy is never a simple fixed when it gets corrupted.

  Thank you

  Hordie.

  MCP. MCDST. LVL 80

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• Error 0 x 80070715 cannot create System Restore Points in Win 7 Ultimate SP1 x 86.

  Hello everyone. Please, let me explain my problem started after returning to Win 7 win 10 Pro (version unknown). When I tried to create a "System Protection" System Restore Point I received a list of error codes for the following messages:

  (1) error 0 x 80070715 es.dll SWPrv.dll eventcls.dll msxml.dll VSSUI.dll not loaded, when you try to re-register vs.

  (2) system WMI Writer MSSearch Service WMI Writer State 10 Failed Time out writer, during the seizure of the writers of vssadmin list on cmd as administrtator.

  No backup Windows works, so I ask the Comunitity to give me a chance to have my OS very well.

  Thank you for supporting me, my best regards, bifolk BO IT.

  Hello. I solved it by installing Win 10 Pro. Bifolk BO IT.

• Get 0x800700B7 error code when you try to create a system restore point.

  Original title: could not create a system restore point.

  Running Windows Vista and trying to set system restore point in System Properties System Protection. Receive, "cannot... file already exests...» 0x800700B7. what I'm doing wrong or not done? Be nice... I am a Virgin computer! LOL PS - the laptop is a hand me down and contaminated by _:)

  Do not know what measures allowing you to create restore point.

  Here is the step by step:

  Start button > in the search box, type backup and Restore Center > press the Enter key > left column > click on create a Restore Point or change settings > wait > in the window system properties, put a stop to the OS (c :)) (System) > click the button create near the bottom right > the rest should be self-explanatory.)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Impossible to create a system restore point and get the error code: 0 x 81000202.

  Original title: could not create a system restore point

  I have Windows 7 Edition home premium.

  I can't create a system restore point.

  I go to control panel > system and security > system > system protection

  and get the following error message:

  There was an unexpected error in the property page.

  The VSS service uses the system restore does not work.

  See the event log for more information. (0 x 81000202).

  I also ran a sysscan but all right.

  How can I create a system restore point?

  Thank you very much

  David

  If you have any software backup as totalrecovery pro 9 or norton ghost, they prevent you from creating a manual restore point.  I have 9 pro full recovery and everything I do is to disable the Recovery Manager when I want to create a manual restore point.  There is no problem with system restore points created they work very well it is the manual of who are the problem.

  Frank

• "Cannot take the required system, error 2147121300 restore point".

  Run the registry clean up using norton 360 v.6 and got this "unable to make the required system, error 2147121300 restore point.

  I need help to make the registry cleaning works on this norton 360.

  On Sunday, October 7, 2012 13:27:28 + 0000, fredericksaw wrote:

  Run the registry clean up using norton 360 v.6 and got this "unable to make the required system, error 2147121300 restore point.

  I need help to make the registry cleaning works on this norton 360.

  I highly recommend that you do not have it.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.
  Ken Blake, Microsoft MVP

• The system restore function is unable to do with the error "no restore points were created on the disk your computer system...." ».

  Original title: where is my last system restore?

  I am under W7 SP1 on an Acer Aspire 7720Z computer laptop and when I try to use the system restore get them all is a box saying "no restore points were created on your computer's system disk. To create a restore point open System Protection. "When I open the protection system and then configure the" C"drive, nothing happens!  I have not tried to use the restore of the system for at least 2 years, but when I lost Autoplay I thought that I would give it a go and the above is the result.  I must say that I solved the problem of AutoPlay (it's a program called VMWare has changed the registry) and after that I put the registry to what it should have been, then, everything is ok.  I would really appreciate someone tell me what is the problem... Thank you

  "Hi

  I hope that you realize that, if in the case of the system restore's restore points is deleted
  This is perhaps the reason why
  to enable the system restore
  You can follow this
  http://www.malwarehelp.org/how-to-disable-enable-system-restore-turn-System-Restore-on-or-off.html
  and for all troubleshooting in advance
  go through
  http://www.askvg.com/fix-system-restore-point-creation-configuration-disabled-by-group-policy-or-system-administrator/

• After you create a system restore point manually, I can't find the point.

  Original title : What's next?

  After you create a system restore point manually, I can't find the point.  Where is he?

  Hello

  More than you probably ever wanted to know.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  How to turn System Restore on or off in Vista
  http://www.Vistax64.com/tutorials/66971-system-restore.html

  Adjustment of the amount of disk space, System Restore uses for restore points
  http://bertk.MVPs.org/html/diskspacev.html

  How to change how much Space System Restore can use
  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
  http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htm

  ShadowStorage vssadmin commands
  http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
  http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=true

  Guide to Windows Vista system restore
  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  Expiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
  backup and at the time when there are high levels of input/output
  http://support.Microsoft.com/?ID=826936

  A good utility:

  Explorer of the shadow - free
  http://www.ShadowExplorer.com/

  You can also view the bridges restore in CCleaner - tools - system restore.

  CCleaner - free - on the left side click on download from Piriform
  http://www.Piriform.com/ccleaner/download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't create a system restore point.

  I can't create a system restore point.  I'm told to group policy won't let me.  I got error 0 x 80070750

  Hello

  Method 1:

  I suggest to run the SFC (SFC scan) system on the computer and then try to create a restoration point and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to perform check disk (chkdsk) on the computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: You may lose any amount of data while performing the check disk.

• create a system restore point cases printers stop working

  I have two HP printers (Laserjet 1536dnf & Officejet 6500) installed on a PC running Win7 64-bit.  Until January, they worked very well after Win7 updates (restore point created automatically).  Since then, any time a system restore point is created I lose access to these two printers.  By clicking on "Devices and Printers" opens the window and the progress bar goes to infinity with nothing found and the process must be closed with the Task Manager.  Printers are not accessible, but no error message appears.  Any reference to a printer causes this particular process hang and must be closed with the Task Manager.

  Both printers are wired Ethernet to Cisco E3000 router and are set up to be shared in the same home group.  Oddly, a second PC in Win7 that is connected via Ethernet to the same router, using the same two printers can create the system restore points without any impact on these two printers.  The main difference between the two is that the PC works an AMD based system, while the affected uses a system based on Intel.

  Printer is restored when I restore the system since early January restore point.  Any later restore point using simply reproduces the problem. I have searched the FAQ and forum but can find no cure.

  Hi Amundarken,

  Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

  After the description of the problem, looks like HP printers (Laserjet 1536dnf & Officejet 6500) stop working after you have created a restore point system.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following question:

  You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: You can check the status of the Printer Spooler service after you have created a restore point system, if the Printer Spooler service is not started and then start the service and check:

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service, you must be logged on as administrator to perform these steps:

  a. click Startand then click Control Panel.

  b. double-click Administrative Toolsand then click Services.

  c. double-click the Printer Spooler service, and then change the startup type to Automatic. This option sets the spooler service starts automatically when you restart the computer.

  d. If you want to start the spooler service immediately, click Start in the area of The State of the Service .

  Method 2: You can update the printer drivers and check if it works.

  See the following articles from Microsoft for more information on the update of drivers:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• How to create a system restore point

  Hello. have a new laptop, and I would like to be able to create system restore points before as I have download things, when I go to the system restore, it asks only if I want to go to one and not how to create one.  Thank you.

  Hello

  Here is a link to a video on How to create a restore point In Windows 7 from Microsoft.

  Always ensure that backups and restore points are not placed in the HP_Recovery partition. It is usually the d: drive.

  Best regards
  ERICO

• Failed to create system restore point, the option is grayed out

  Original title: System Restore point

  I can't manually create a system restore point, the box is grayed out. Also it does list not the previous points to restorew, but the so-called whenever I have use windows update it is to create a.

  Hi mandmmiller,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Start Windows backup and Volume shadow copy services
  a. Click Start, type services.msc and press to enter.
  b. in the list of issues, double click Windows backup and Volume shadow copy services.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  Step 2: Run SFC (System File Checker) scan to find and repair missing or corrupt system files and check the result. To do this, try the following steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open program (0 x 80070057 erro) system restore point - details below

  Hi people. I open the program of system restore point can´t, it displays the folow error message: unexpected error. incorrect setting. 0 x 80070057. the restoration of the system will be closed. (or something like that). Someone knows how to fix this? What happened, I have never had any problems with my windows vista before. Very thanks! Pedro Pacheco of the Brazil (and sorry for my bad English)

  There may be several reasons for the restoration of the system do not have to work.

  1. If you are using Norton, disable it before using the system restore.
  Norton will interfere with system restore.

  2. try to use Safe Mode system restore:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3. malware stops at a system restore.
  Try a scan of your system:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  http://www.Spybot.info/en/index.html

  Spybot Search & Destroy 1.6.2 is a very good Anti-Spyware FREE program.

  Download, install, update and immunize your system with it.

  Then ANALYZE with her.

  Update and scan your system once a fortnight

  See you soon.

  Mick Murphy - Microsoft partner

• None of the documents that I saved/created are deleted when I restore to a system restore point?

  I currently have problems with my Toshiba A305 S6905. This is the webcam does not work. I tried everything, including the installation/uninstallation of drivers, it was working a week ago. So I decided to go back to a system restore point, just to see if I installed something wrong.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files on your computer.

   

  Note

  System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

• Windows 7 - How to create installation of the automatic system restore points

  After installing Norton 2010 Security Suite, my hp officejet pro 8500 printer stopped printing. When I tried to do a system restore, I found that I had only a restore point and that was created after the installation of Norton.

  Under XP, I had restore points created every day, automatically.

  How to configure the creation of automatic system restore points in Windows 7 Pro?

  Hello Mikeoncamano,

  Welcome to the Microsoft Answers site

  Turn on or turn off System Restore

  System Restore regularly changes made to your computer's system files and uses a feature called system protection to create restore points. System protection is turned on by default on the hard disk that Windows is installed. You can enable restoring the system for other disks by turning on system protection for these disks.

  You can not turn on protection system for a disc is formatted by using the FAT or FAT32 file systems.

  To turn on System Protection

  Open system by clicking Start , right-clicking computer, and then click Properties.

  In the left pane, click system protection.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Under Parameters of Protection, click the disk, and then click Configure.

  Do one of the following:

  To be able to restore system settings and previous versions of files, click on restore system settings and previous versions of the file.

  To be able to only restore previous versions of files, click only restore previous versions of files.

  Click OK, and then click OK again.

  Kind regards

  It will create automatically restore points when there are changes to the computer or Windows.

  Disable your Norton protection system and check if she created the restore point...

  Bharath
  Microsoft technical support