Error "the message could not be sent. "The setting for your outgoing e-mail [SMTP] Server may need to be configured" in Windows Live Mail
I use Windows Live Mail and it seems to me that they receive an email but I get the following messages and cannot send emails
The message could not be sent. The setting for your outgoing e-mail [SMTP] Server may need to be configured. To find the server settings for * address email is removed from the privacy *', please contact your e-mail service provider.
Object "Marriot coverage."
Server error: 550
Server response: 550 must be authenticated.
Server: 'auth.smtp.1and1.co.uk '.
Windows Live Mail error ID: 0x800CCC79
Protocol: SMTP
Port: 587
Secure (SSL): Yes
Can someone help me please
JO
Original title: Email problems
Check with your e-mail provider on how the various SMTP (especially the port) settings must be set to confirm that everything is correct. But, take a look at this setting and try to change it if necessary to see if it helps.
WLMail open
Right-click on the name of the email account
Click 'properties '.
Click the [servers].
"my server requires authentication" is checked?
If it is not try to delay it and
Note that you may need to click the [Settings] button to enter the necessary info he needed.
Tags: Windows
Similar Questions
-
The message could not be sent.
While creating a new laptop, I dutifully copied details a current e-mail account from the pc, including POP3 and SMTP details. On the laptop, I had no problem receiving emails and has managed to SEND an email to one of my other email accounts, but two other email addresses, I got error when sending e-mail messages, as follows...
"The message could not be sent. The setting for your outgoing (SMTP) e-mail server may need to be configured. To find the server settings for ' * address email is removed from the privacy *' please contact your e-mail service provider.
Topic "test test test".
Server error: 550
Server response: 550 relay mail to [email protected] is not allowed
SERVER: 'mail.bigpond.com.
Windows Live Mail error IF: 0x800CCC79
Protocol: SMTP
Port: 25
... Unfortunately, on the laptop, for some reason, I can't read the rest of the error message!
Note: I MANAGED to send another email beforehand, to ' * address email is removed from the privacy *' and I just send another email again to this last address, with no problems at all.
Can someone explain WHY I can't send emails to certain addresses? Is it because they are listed on my main computer already?
Thanking you in advance,
Ben
Thank you for visiting the Microsoft answers community site.
The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.
Please visit the link below to find a community that will support what ask you:
http://windowslivehelp.com/forums.aspx?ProductID=15
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The message error message could not be sent because one of the recipients was rejected by the server. No, Server error: 450, error number: 0x800CCC79 but the message is not in the sent box to remove. I know that I used the wrong email address. Error message is popping up every time I'm looking for or send emails. Help
Hello
1. What on the computer email client do you use?
2. who is your provider of mail Service?
You can perform the methods provided for in article knowledge base provided if the problem is when you send mail in outlook.
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
http://support.Microsoft.com/kb/813514
If it's a hotmail issue, it would be better suited to the Windows Live community. Then I suggest you visit the link that will provide the best support.
http://www.windowslivehelp.com/product.aspx?ProductID=1 -
The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.
The rejected e-mail address was * address email is removed from the privacy *'. "Subject 'Welder must build raised bed (Georgetown)', account: 'pop.gmail.com', server: 'smtp.live.com', Protocol: S account: 'pop3', server: 'pop.gmail.com', Protocol: POP3, server response: '-ERR not supported ca5pf6356717vdc.15', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC18MTP, server response: ' 530 5.7.0 must issue a STARTTLS command first ', Port: 587, secure (SSL): no, the message could be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.
The rejected e-mail address was * address email is removed from the privacy *'. Object ' Roadtechs.com post: PIPEFITTERS NEED LOUISIANA ', account: 'pop3', server: 'smtp.gmail.com', Protocol: SMTP, server response: 530 5.7.0 must issue a STARTTLS command first. r5sm16402004vdg.17', Port: 587, secure (SSL): no, Server error: 530, error number: 0x800CCC78Server error: 530, error number: 0x800CCC78
Ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3). Then delete the account completely and compact and repair the database (see www.oehelp.com/WMUtil/), and then try to add the account back again. Also check webmail works fine.
Steve
-
could not access vb run time for custom action script
I try to install an air 320u sierra wireless card and I get an error message "could not access vb run time for custom action script. Cannot install the Manager of mobile broadband services. Any ideas?Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Also check out this link:
It will be useful.
-
Original title: Windows Fax and Scan is unable to fax any type of attachment
I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2.
I get "the message could not be sent. These data are incorrect. »
I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
The problem is with an attachment to a fax. Tried to PDF, DOC, ZIP, JPEG, and TIFF.
I found lots of posts with the same problem, but no solutions or problem.Windows Vista Business SP2, Adobe Acrobat 9 Pro using
Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt. WF & S now works well when you attach files.
-
Fax and Scan Error - Message could not be sent. Media is write protected
I have a PC with Windows Vista Ultimate on it. Turns off user access control. On the sign as Admin will have all the rights.
Windows Fax and Scan works very well for a long time. Had a modem comes to shove, he replaced everything works fine.
In the last day or two - with no known changes to the system - the system is no longer send and receive faxes.
It gives me an error-"message could not be sent. the media is write protected. »
This happens if I try to send a fax directly from the Windows fax software or if I try to "print" a document by fax.
When you receive a fax - it gives a similar error.
It works as records receive faxes are unalterable and, if I look at their properties in Explorer. I try to uncheck Read-only and it acts like it works only when I get back - read-only is still selected.
Other times I tried to make changes to access to the files by Windows Fax, fax settings - but it tells me that I have to be logged on as administrator to make these changes and I signed up as an administrator - the only Director on the PC.
I also removed the Fax profile and recreated. I think that the question is the property read-only on my directory of fax, but for some reason that seems locked on.
I also shot the back, rebooted, turned off UAC back, rebooted and tried to change the settings of RO, no luck.
Any ideas or suggestions would be greatly appreciated.
Thank you!
Read-only for folders is normal (mine are). See if this fix works for you:
Fax Error: The message could not be sent. Media is write protected
If the registry change is useful, please let us know.
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
On outlook express, I get the following error message "the message could not sent because the server rejected the sender's e-mail address. How can I eliminate this problem, please?
I can find no trace messages claim are waiting for shipment.Unsent Mail file, do you mean the Outbox? Check: File | Work offline and in: reviews | Layout: uncheck the preview pane and delete the messages. Otherwise, delete the Outbox.dbx file in the message store.
-
Hello again guys!
This error started before even El Capitan. I am able to receive emails but not send.
The message is "this message can not be sent because your account does not have a mail server outgoing favorite" and I don't know where to change that or what to enter here, incidentally.
Any ideas? I guess it's an easy fix (hopefully).
Thanks in advance
Juan
Please open the Mail preferences window and select the drafting tab make a selection in the menu option
Send new messages to:
If the selection is
Selected mailbox account
and you get a warning that there is no preferred outgoing mail server, then click the tab accounts and change the account in question. Select a server from the menu
Account information ▹ server outgoing (SMTP) mail
-
Server smtp.netnet.net
Hello
1 how long have you been faced with this problem?
2 do you have you can all changes on the computer before this problem?
3. what webmail client or email you use?
4. who is your internet service provider?Please answer these questions that might help us helping you better.
This can happen if the outgoing smtp server is no game accordingly, in case if you are using Outlook or Outlook express. Reconfigures information from the SMTP outgoing could solve this problem.
Reference:
How to configure Internet e-mail accounts in Outlook
http://support.Microsoft.com/kb/287532
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
http://support.Microsoft.com/kb/813514For further assistance on Outlook, contact the Outlook support team.
http://answers.Microsoft.com/en-us/Office/Forum/Outlook -
Received error message this message could not be sent due to the size of the field limit
Messages come in saying that the size of the field limit, messages to be delivered. How can I fix?
Bobrm2:
Thank you very much for the comments, this can help others.
Good to hear everything is now ok. -
It started just two days before, when I tried to email a bow popped up. Some ocured of errors in the processing of the application. See HELP, click "Troubleshoot Windows Mail" I do not see this statement today. Yesterday, I found somehow and make their operating instructions and arrived in the box, I put a check mark in one of the boxes, and now I can't receive my mail. Can you help me a...
Try to compact and repair the database and see if that helps (see www.oehelp.com/WMUtil/). And beware of the antivirus software that may interfere with WinMail. See www.oehelp.com/OETips.aspx#3
Steve
-
Why the webpostmaster keep telling me that some e-mail messages could not be sent by e-mail.
The e-mail ends are. tbwifi.ca. This is the only I seem to have a problem with. Is there something in the transmission that will not take this outcome?
That happened two to three months. These addresses are in my contacts and they use to get all my back and emails. Most of the time, attackers don't cross. Help?Hello
· E-mail account which send you emails to (email provider: Hotmail, Yahoo etc.)?
· What email client you use (Outlook)?
It seems that there is a problem with the server Tera bytes webmail. I suggest you to contact Tera Byte for assistance. Click on the link below.
-
Using CS3 with 2002 intel mac book - file mov - good working order - appears blank in the list of files?
Hi warnerblake,
Can you try the solutions proposed in this article change, add file extensions recognized | Dreamweaver and let us know if you still need help?
Thank you
Preran
-
The message could not sent, Server error: 550, error number: 0x800CCC79
The message could not be sent. The authentication setting are may not be wrong for your e-mail [SMTP] Server outgoing. To resolve this issue, go to help, search for "Troubleshoot Windows Mail" and read the section "I have problems sending e-mail". If you need help to determine the appropriate server settings, contact your e-mail service provider.
The rejected e-mail address was ' karen.hall@stationcasinos. com'. Subject 'Thank you!', account: 'pop.west.cox.net', server: 'smtp.west.cox.net', Protocol: SMTP, server response: 550 5.5.0
invalid address, Port: 25, secure (SSL): no, Server error: 550, error number: 0x800CCC79 The rejected e-mail address was ' karen.hall@stationcasinos. com'.
You did your email: there should be no space between stationcasinos and com. Go to tools > accounts > {account}, and then click Properties. Check addresses both the general tab and the tab of servers under the username by e-mail.
It is the main cause of the error. Using the obsolete parameters as noted Bruce can also cause problems.
Maybe you are looking for
-
Can not change the configuration of the e-mail pop up account when add existing e-mail account
As says the issue I can change the name, but not the fields email and password in the first box pop up that appears when you add an existing e-mail account. Seems to be a bug in the pop-up edition regardless of the new account is.
-
M6-1225dx ENVY: HP ENVY m6-1225dx Notebook again broken hinge.
Hello I've had this laptop since February 2013. He executed perfectly. With the exception of the cover. The plastic hinges around case broke twice. The first time an engineer maintence to TV station, for which I worked it sets for me. Last week, the
-
I have a brand new HP 310-1125Y everything in a TouchSmart PC. Place a CD in the drive and nothing happens after loading. I went to Device Manager and it shows that the CD player is pilot error 39. I did a search of update and the system of all the d
-
Fix execution for performance, click here to follow the link from Outlook 2007 to IE8 does not work
-
bug strange number of bin on HP4015 with drivers HP PCL5 universal
Hello We have 3 trays on a HP4015 so usually the numbers in the source document on the client side are: automatic, tray 1, 2, 3. Now, with HP universal PCL5 drivers on the client side we have number of tray: automatic, 241, 3972, 725, 726, 727 platea