Error: the translators are not loaded due to errors
Whenever I use Dreamweaver CS3, I get the following error message will appear:"The following translators were not loaded due to errors: Spry.htm: has configuration information that is invalid.".
I tried to rename the configuration in C:\Program Files\Adobe\Adobe Dreamweaver CS3 folder, then Dreamweaver would not work, so I changed it the original name. I have NOT used any framework spry for the validation of the form.
-Patty
[email protected] wrote:
> When I use Dreamweaver CS3, I get the following error pop
> to the top:
>
> "The following translators were not loaded due to errors: Spry.htm: has '.
> the configuration information that is invalid. »
http://www.Adobe.com/go/tn_19105
Troubleshooting step 4 normally does the trick.
--
Adobe Community Expert David Powers
Author, "The Essential Guide to Dreamweaver CS3" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Tags: Dreamweaver
Similar Questions
-
Hello
Recently, my computer has problems, I had to install Windows7 instead of Windows Vista. I did a clean install of Dreamvers CS4. I was able to export all the sites from my old computer. But every time I try to open any file for editing I have this pop up error message:
The following translators were not loaded due to errors: ASP.htm has information duplicated by another translator.
Same error for ASP.Net.htm, ColdFusion.htm, Date.htm, FlashObject.htm, ICERegions.htm, JSP.htm, PHP_MySQL.htm, server model SSH.htm, Spry.htm, SpryWidget.htm, XSLT.htm and XSLTransform.htm
I've seen several threads with similar error message, where translators were invalid, while mine are reproduced by another translator. But I tried the patch anyway.
I tried to delete the WinFileCache and configuration files. Did not help. I also tried to create a new site and get all the files on the remote control. The same problem.
Any help will be greatly appreciated.
Valentina
I finally solved the problem. Have no idea how it happened, but I had double set of files in the main configuration file.
The path is C:\Program Files (x 86) \Adobe\AdobeDreamweaverCS4\configuration\Translators
In this case, I had, for example 2 files: ASP.html and ASP (1) .html
When I removed all the files (1), which has solved the problem.
Hope that no one get this kind of problem, but the answer is here.
Valentina
-
I have Dreamweaver 2014.1.1 build 6982
My computer is an iMac running Yosemite 10.10.3
Whenever a file is opened, I get the following error message:
"The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid.".
generally to close this error I have to click on the button OK 3 times
Further discussion I tried to rename the configuration file. This only prevented the application to load completely, so the name was changed back.
This has been resolved.
-
Can anyone help please.
When I try to start my DW CS3 on my PC (Win XP) this message appears every time - the following translators were not loaded due to errors: spry.htm: has configuration information that is invalid.
I am fairly new to this Yes, can you tell me what I need to do something?
Thank you
Alex
See
Troubleshooting errors in Dreamweaver JavaScript
http://go.Adobe.com/kb/ts_tn_19105_en-us
Try steps 4, 6 and 12.
-
Most of the sites are not loading on all browsers
Hello
2 weeks ago my MacBook Pro was working fine and I used it on the internet using an Ethernet cable for the 1st time. Then I had to travel and come back 2 days without it. When I tried to use it via my WiFi router, I realized that most of the sites are not loading on safari, chrome, firefox, etc. Only Youtube, Facebook, Twitter, Apple.com, Google and Yahoo are working. When I try other websites I get messages such as;
Unable to connect
Firefox can't establish a connection to the server www.google.com.
The site may be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
and
Safari cannot connect to the server.
Other applications using internet work very well. My router is also OK. When I use the laptop mode safe mode everything works fine and I can access the sites but I need my machine in its maximum capacity.
Please help me, I would greatly appreciate it
Thank you
This is probably a problem with Server DNS (Domain Name). If you enter anything in the DNS domains for your Wi - Fi configuration, it rolls too the parameters provided by your router.
The best way to dig you out of ANY configuration problem, is to set up again from scratch, using:
System Preferences > network > Wi - Fi > (help me) > (Assistant)...
Be sure to specify a set of 'Place' new, mnemonic name, NOT the default. After answering questions, don't forget to click (apply) and close the window to have the changes take effect. Now, this set of parameters can be applied "all at once" when you're back at this place.
When, in another location, create a new package from 'Rental' from scratch, so as not to crush those who work somewhere else.
-
Fuse for Photoshop-skeleton / options of the body are not loading in the Properties window
Hi, I'm trying to animate a character of fuse but the skeletons properties not load up. I left for an hour and still no luck.
Can anyone provide any help on this?
Hello
Can you try to go to help > Sign Out (Adobe ID) and disconnect. Leave the Ps, then restart and log in again?
Kind regards
Steve
-
The contacts are not loading after OS updated to Version 6.0 of Marshmallow
Hi all
I use Note K4. I've updated the Version of the OS to Version 6.0. After updating the Version of the OS the soft Contacts does not work. It lists progressdialog for longer and longer. It loads evertime. But no contacts appear. Also, I am trying to import the Contacts. He does not appear.
Please help me. Thanks in advance!
go to settings/applications/Manager contacts and force to close.
also erase the data of the user (Makke you have the copy backup)
Also, re - install your whatsapp (not a joke. Has worked for the users of manu with the same question)
Open contacts... Click on the 3 points and chose "contacts to display.
The select 'Phone' only.
Also select 'display only the contacts with number '.
-
Adobe typekit javascript added in html, but the fonts are not loading/display on browser
I have a set of fonts selected in adobe typekit, after that I used the code embedded in the html file, I still don't see the fonts displayed/shown in the browser. That's the fluidlayout working on a website using dremweaver.
The "boilerplate.css" has his own fonts mentioned, but this has got something to do with the fonts using adobe typekit?
To see a preview of the Typekit fonts locally, you should use a local test such as wamp, xampp or mamp server and configure it in your DW site definition. See screenshot.
Nancy O.
-
Dreamwever cs5.5 cannot save or stick translators not loaded due to errors
Yesterday, everything was fine. No change, no new installs what it is. I have Windows7 64, DW CS5.5. All of a sudden today many things is falling apart: cannot open a html page and register a sub - is no longer an option. Cannot copy then paste into a page - even simple HTML. Must use the "Paste special" option Biggest problem is each page I opened, even after installing the latest updates, reboot and the soft opening DW is this new popup alert: the following translators were not loaded due to errors: ColdFusion.htm: invalid configuration information tha tis a. Date.htm: has configuration information that is invalid. Spry.htm: has configuration information that is invalid.
Because it worked yesterday, the common solution I see is the old, uninstall and reinstall. If this is the same disk, etc. Why that would help me? Can someone point me to a more logical solution without blame code or anythign else? I tried to create the easiest page in html with nothing between the head or the body - get always the same error.
Thank you.
Try
-
sovereign wealth funds are not loading the server
Hi guys!
I have a problem. We have a website www.onlinerealgames.com which hosts the game developed by our company. Recently, we wanted to change the template. We test the new model in a subdomain of ours which is www.onlinerealgames.in.
All right, except that the SWFs on the server are not loading. Instead, they show not responsible film. If I can directly access the swf file with the URL indicating the download option window.
We have a separate database for both sites. Both have same sovereign wealth funds. If we change the source of .in in .com then sovereign wealth funds are to load properly (in the src of the embed tag property)
Can someone help in this issue!
Thanks in advance.
your .in server may need to be updated to support swf mime types.
https://developer.Mozilla.org/en/Properly_Configuring_Server_MIME_Types
-
'Translators were not loaded' mistakes...
Hello. I DW CS4 (Design premium group) on Mac OS 10 (10.5.8). When I open my program I get this message:
"The following translators were not loaded due to errors:
ASP.htm a configuration that is not valid.
JSP.htm has configuration information that is invalid.
SSI.htm model of server has configuration information that is invalid.
XSLTransform.htm has configuration information that is invalid. »Reinstall the program help?
I thank very you much for your time and your help.
kimm91899494 wrote:
I have a very similar problem.
Whenever a file is opened in Dreamweaver CC 2014.1.1 6982 build on my iMac running Yosemite, I get this error:
The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid.
Rename the Configuration folder only prevented the application to load completely.
Looks like you have renamed the incorrect configuration file.
Dreamweaver has two and the one you want is hidden by your default operating system. Turn your hidden files: quickly show/hide hidden files on Mac OS X Mavericks & Yosemite - Ian Lunn - Front End Developer
.. then go to Macintosh HD > username > library > Application Support > Adobe > Dreamweaver (version) > language > Configuration
-
Hello guys!
I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)
I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have
- Add snap-ins powercli and connect to virtualcenter servers
- ask the VC servers to virtual machines in a perticular folder
- Loop foreach on these servers to create a snapshot with the name $snapshotname
Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:
- Testmagne1 - normal operation
- Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
- testmagne3 - normal operation
Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.
The strange thing is:
The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)
In virtualcenter, the output is as follows
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot is created successfully - as expected
However, the exit in powercli is slightly different:
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?
Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"
I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere
Here is some additional information:
1. the Script (abridged version of it. It generates the same error):
-STARTUP SCRIPT-
$ErrorActionPreference = "stop".
Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null
SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names
$servers = get-VM-location 'testfolder '.
$snapshotname = 'Testsnapshot '.
$verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.
If ($verifycreatesnapshot - eq 'y') {}
Write-Host "snapshots of creation...". »
{ForEach ($i in $servers)
Write-Host "instant Creation for $i."
Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}
Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}
}
Write-Host "command finished.
}
else {Write-Host "Operation canceled by user"}
Read-Host "end of the script. Press ENTER to close. "
------------------ END SCRIPT -------------------
2. the PowerCli error messages:
Error for Testmagne 2 (as expected):
File: [DATASTORE114] testmagne2/testmagne2.vmx
DynamicType:
DynamicPropertyInternal:
FaultCause:
FaultMessage:
ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O
perationFailed
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction:
SessionId:
ConnectionId: /VIServer = SENSORED: 443 /
Severity: error
Message: 31/10/2013-10:52:16 New-Snapshot the operat
ion for the entity 'testmagne2' failed with the follo
the wing's message: "file [DATASTORE114] testmagne2/testmagn".
E2.vmx was not found.
Data: {ParameterValues}
InnerException: VMware.Vim.VimException: exploitation of the entity
'testmagne2' failed with the following message: 'thread '.
testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy
ND ".
TargetSite:
StackTrace:
HelpLink:
Source:
Failed to create the snapshot for testmagne2
Error for testmagne3:
Creation of snapshot for testmagne3
ErrorId: Core_BaseCmdlet_UnknownError
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction: An error occurred when executing command: new-Snapshot. I have check
f exception for more details.
SessionId:
Login ID:
Severity: error
Message: 31/10/2013-10:52:17 instant New-capture operation is not
valid due to the current state of the object.
Data: {ParameterValues}
InnerException : System.InvalidOperationException: operation is not valid from
e to the current state of the object.
at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo
reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi
St)
at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService
Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p
rogressCallback)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl
and. EndProcessingErrorHandled()
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC
mdlet. EndProcessingErrorHandled()
TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err
orRecord)
StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT
erminatingError (ErrorRecord errorRecord)
HelpLink:
Source: System.Management.Automation
Failed to create the snapshot for testmagne3
3 PowerCLI version
PowerCLI Version
----------------
VMware vSphere PowerCLI 5.5 Release 1 build 1295336
---------------
Versions of the snap
---------------
VMWare AutoDeploy PowerCLI component 5.5 build 1262826
VMWare ImageBuilder PowerCLI component 5.5 build 1262826
License of VMware PowerCLI component 5.5 build 1265954
VDS's VMware PowerCLI component 5.5 build 1295334
VMware vSphere PowerCLI component 5.5 build 1295334
4 VirtualCenter version
VMware vCenter Server Version 5.0.0 Build 913577
vSphere Client Version 5.0.0 Build 913577
Hosts: VMware ESXi 5.0.0 Build 914586
If you need additional information, let me know
Any help is greatly appreciated
Thank you!
-Loincloth
Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.
-
Hello!
After the end of my second day of test error, I put this question on the table:
I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.
I confirmed that:
the RowData sizes and the ChannelNames are equal,
both spend the isarray = true test,
I change the order of the ChannelNames,.
I have reconnected/disconnected from the oConnexion every time, nothing has changed.
Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:
oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")
Call OpenSQLConnection
Set oRecordset = CreateObject ("ADODB. Recordset')
Call SelectWell
Call GetWellStateIDsData.Root.Clear
for j = 0 to ubound(oTables,1)sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
oRecordset.Open sSQLSting, oConnexion
Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
for i = 0 to orecordset. Fields.Count - 1
oFieldNames (i) = orecordset. Fields.Item (i) .name
next
oArray = oRecordset.GetRows (-1, 0, oFieldNames)
Set oGroup = Data .root .ChannelGroups .Add (oTables (j))oArray, oFieldNames arraytochannels
oRecordset.close
oConnection.Close
nextSub GetWellStateIDs
sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
oRecordset.Open sSQLSting, oConnexion
oArray = oRecordset.GetRows)
WellStateIDFirst = oArray (0,0)
WellStateIDLast = oArray (0, ubound(oArray,2))
oRecordset.close
EndSubSub OpenSQLConnection
Set WshNetwork = CreateObject
oComputerName = WshNetwork.ComputerName
oDB = "MX2. Player.DB ".
Set oConnexion = CreateObject ("ADODB. Connection")
oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
oProvider = oProvider & oDB
oConnection.ConnectionString = oProvider
oConnection.Open
EndSubAnother clue. If you check using DIAdem
Microsoft Windows Script Debugger
you are able to install the debugger in DIAdem.
It would potentially have shown that the command does not work as expected.
Sorry for the inconveniance
Andreas
-
Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.
Bill
original title: recover lost Volume Licensing
I just figured this out...
I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.
I hope that this is useful information to others in the same situation.
Bill
-
I'm 13.0.1 on windows 7 and I have adblock and download helper. Since the recent update for firefox, youtube suggestions that appear on the right side of the page does not load correctly. When the 1st page opens the suggestions is there, but a few seconds later late only a clear white box appears. I searched on google and found that I should check aboutconfig and change a setting to true. Well setting was already true so this isn't the question and I have not made any other changes. Firefox is a great product, and I've never had problems. I must say however that this youtube thing is pretty annoying. Any suggestions on how to fix?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
Maybe you are looking for
-
Portege R500-11Z: how to use the external mic and hear the internal speakers
We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers. When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out! How to use an external mic and still hear
-
I am running Firefox 4.0 b7.
-
It's one of these issues "can I extend my old laptop a little further. I have a Tecra 8000. He has 256 MB of memory in a single module of memory in one of the two memory slots. There is a free slot. Can I put another (probably 256 MB) memory module i
-
Activate FileStreaming on SQL Server 2008 R2 fails
Hi all I am trying to activate on SQL Server 2008 R2 filestreaming I have, but nothing seems to work, I tried this on all SQL servers, we have, or RTM, SP2 or SP3 and I still get the following error \\?\GLOBALROOT\Device\RsFx0150\\RBS: cannot verify
-
Photosmart 7520 disconnects internet connection
I recently bought a 7520 Photosmart all-in-one which is connected to my home wireless. It works great except for one very annoying thing. If I print something, leave the printer on and walk, when I come back a moment later my Mac has disconnected f